Loading...
HomeMy WebLinkAboutX2019-0534 - Misc (2)(v XW`1-05311 89 5 Dove 5+ VAV TERMINAL TEST REPORT Inland Air Balance, Inc. Project1r�9�,c'li a System 9 v& 5;4N 4 . fS� ory fjr t eSu�. Date Job # VAV TPRMINIAI nATA NUMBER?J DESIGN DESIGN NOTES TYPE I D L PRIMARY MAX AIRFLOW C.F.M.UO �NOTES 2ACTUAL PRIMARY MIN AIRFLOW C.F.M. SIZE PRIMARY MIN AIRFLOW C.F.M. Z d HEATING AIRFLOW C.F.M. DDC CORRECTION -FACTOR 3 1.3 I HEATING AIRFLOW C.F.M. _ OUTLET SIZE VAV OUTLET DATA TYPE ROOM OUTLET SIZE AK TYPE REQUIRED ACTUAL MAX MIN MAX MIN MAX I MIN MAX MIN I C,D 2ov n ' 'FACTOR' d -i Z Zt v Y 1= LiC-0 T- Ov 1 Zv VAV TERMINAL DATA NUMBER L( DESIGN ACTUAL TYPE O 11 C. PRIMARY MAX AIRFLOW C.F.M to 00 �NOTES SIZE v PRIMARY MIN AIRFLOW C.F.M. CDC CORRECTION Z 43 FACTOR L�.a-1 HEATING AIRFLOW C.F.M. VAV OUTLET DATA ROOM OUTLET SIZE AK TYPE REQUIRED ACTUAL FACTOR' MAX MIN MAX MIN 00 I f C✓�6 1 v C,D 2ov i 9 S d -i Z Zt v 1= LiC-0 LAOS- !$S' NU 1 E: It AK -1.0, Velloociitty� information and' measurements are not required NOTES- C t �=6 �1' �t.l l 0 S C -i Readings By: 2 Inland Air Balance, Inc. 1VAV TERMINAL TEST REPORT Project �Pu��✓�" �<t�� ® (G ger%! i i System (✓ Date S to Gl Job # VAV TERMINAL DATA NUMBER E L DESIGN ACTUAL NOTES TYPE �L PRIMARY MAX AIRFLOW C.F.M - vC) v SIZE I PRIMARY MIN AIRFLOW C.F.M. 1 �� ' DDC CORRECTION FACTOR IIe.I HEATING AIRFLOW C.F.M. \ VAV OUTLET DATA ROOM ROOM OUTLET SIZE AK TYPE REQUIRED ACTUAL FACTOR" FACTOR' MAX MAX .-MIN' MAX -MIN /� >4 I V v / CD !-J CJC.) 1 Z e77 Z v2 3 1— l VAV TFRMINAI DATA NUMBER )'2- .DESIGN ACTUAL NOTES TYPE CQC- PRIMARY MAX AIRFLOW C.F.M LAC) d SIZE (a PRIMARY MIN AIRFLOW C.F.M. 1 �� DDC CORRECTION FACTOR HEATING AIRFLOW C.F.M.', / I 10 VAV OUTLET DATA - ,- ROOM OUTLET SIZE AK TYPE REQUIRED ACTUAL FACTOR" MAX MMI--- MAX IN t o /� >4 I V v / CD !-J CJC.) 1 Z e77 NOTE: If AK=7.0,city information and measurements are not required NOTES• 1. SAcooS OI\ CIC 11nA�(Ji Readings By: .---N t r �U AC 0-&555 `irk \,?\\J d� Ick yyC iA*'Ir d , V A -y QD- &,,A C At O °v) kc;, tA. o r ,,,) I I \ Y -\ O+ res(�� -vo 6 La�hwa Co(v\vVA A 5. STATE OF CALIFORNIA ENERGY MANAGEMENT CONTROL SYSTEM OR LIGHTING CONTROL SYSTEM 4 CEC-NRCI-LTI-02-E Revised 4x/16 CALIFORNIA ENERGY COMMISSION CERTIFICATE OF INSTALLATION NRCI-LTI-02-E Energy Management Control System or Lighting Control System (Page 1 of 6) Proied Name: THOMAS POWELL rnmrcement Agency: NEWPORTBEACH Permit Number: X2019-0534 Ptoied Addmo:895.D0UE ST.'UNIT 111 Qty':NEWP0R'TSEX44 zry �0de192550 GENERAL INFORMATION Enter the date of approval by enforcement agency of the Certificate of Compliance that provides DATE OF BUILDING PERMIT PERMIT # x2019-0534 Uolq- 05 3y 03/25/2019 BUILDINGTYPE Nonresidential ❑ High -Rise Res (Common Area) ❑ Hotel/Motel (Common Area) PHASE OF -CONST-RUCTION ❑ New construction ❑ Addition EDAlteration ❑ Unconditioned SCOPE OF RESPONSIBILITY Enter the date of approval by enforcement agency of the Certificate of Compliance that provides Date: the specifrcationsfor the energy efficiency measures for the scope of responsibifity for this Installation Certificate. Requirements in the Standards: §130.4(b) Before an Energy Management Control System (FMCS), or Lighting Control System can be recognized for compliance with the lighting control requirements in Part 6 of Title 24, the person who is eligible under Division 3 of the Business and Professions Code to accept responsibility for the construction or installation of features, materials, components, or manufactured devices shall sign and submit this Installation Certificate. If any of the requirements in this Installation Certificate fail the Energy Management Control System or Lighting Control System installation requirements, these options for controlling lighting shall not be recognized for compliance with the Building Energy Efficiency Standards. Check all that apply. PART 1 What type of tighting Control System has been installed? ❑ A. Energy Management Control System (EMCS) -Is a computerized control system designed to regulate the energy consumption of a building by controlling the operation of energy consuming systems, such as the heating, ventilation and air conditioning (HVAC), lighting, and water heating systems, and is capable of monitoring environmental and system loads, and adjusting HVAC operations in order to optimize energy usage and respond to demand response signals. ❑ The Energy Management Control System has been installed to function as a fighting control required by Part 6 and functionally meets all applicable requirements for each application for which it is installed, in accordance with Sections 110.9, 130.0 through 1303,140:6 through 150.0, and 150.2; and complies with Reference Nonresidential Appendix NA7.7.2. ❑ The EMCS has been separately tested for each respective lighting control system for which it is installed to function as. ❑✓ B. Lighting Control System -Requires two or more components to be installed in the building to provide all of the functionality required to make up a fully functional and compliant lighting control. 21 The installed Lighting Control System complies with the requirements checked below; and all components of the system considered together as installed meet all applicable requirements for the application for which they are installed as required in Sections 130.0 through 130.5, Sections 140:6 through 140.8, Section 141.0, and Section 150.13(k). CA Building Energy Efficiency Standards - 2016 Nonresidential Compliance January 2016 STATE OF CALIFORNIA ENERGY MANAGEMENT CONTROL SYSTEM OR LIGHTING CONTROL SYSTEM 2 CFC-NRCI-LTI-024F (Revised 011161 rat tcnanrm cntcar_v rMRMcetnm CERTIFICATE OF INSTALLATION NRCI-LTI-02-E Energy Management Control System or Lighting Control System (Page 2 of 6) Project Name: THOMAS POWELL ] Enforcement ApAcy. NEWPORT BEACH Permit Number. X2019-0534 Projed nddress:$950OVE ST. UNIT 111 e'ty` NEWPQRT;KACH 60 PART 2 Lighting Control Functionalrequirements: Check all that apply when verifying the installation of an EMCS or Lighting Control System. RJ A. Ali Aghting controls and equipment have been insta{led in accordance -Mth the manufacturer's instructions. [I B. The manufacturer has provided instructions for calibration. ❑✓ C. If indicator lights are integral to any components, such indicator lights consumes no more than 1 watt of power per indicator light. ❑✓ D. Components that are regulated by the Title 20 Appliance Efficiency Regulations have been certified to the Energy Commission. ✓I E. The EMCS or Lighting Control System functions as one or more of the Time -Switch. Lighting. Controls checked below, and complies with all of the following requirements: ❑✓ 1. Automatic Time -Switch Controls meeting all requirements for Automatic Time Switch Control devices in the Title 20 Appliance Efficiency Regulations, including the requirements below: a. Residential automatic time -switch controls have program backup capabilities that prevent the Joss of the device's schedule for at Beast 7 days, and the device's date and time for at least 72 hours 9 power is interrupted. b. Commercial automatic time -switch controls meet the following requirements: i. Has program backup capabilities that prevent the loss of the device's schedule for at least 7 days, and the device's date and time for at $east 72 hours if power is Interrupted; ii. Is capable of providing manual override to each connected load and shall resume normally scheduled operation after manual override is initiated within 2 hours for each connected load; and iii. Incorporates an automatic holiday shutoff feature that turns off all connected loads for at least 24 hours and then resumes normally scheduled operation. ❑ 2. Astronomical Time -Switch Controls meeting all requirements for Astronomical Time -Switch Control devices in the Title 20 Appliance Efficiency Regulations, including the requirements below: a. Meets the requirements of an automatic time -switch control; b. Has sunrise and sunset prediction accuracy within plus -or -minus 15 minutes and timekeeping accuracy within 5 minutes per year; c. Is capable of displaying date, current time, sunrise time, sunset time, and switching times for each step during programming; d. Has an automatic daylight savings time adjustment; and e. Has the ability to independently offset the on and off for each channel by at least 99• minutes before and after sunrise or sunset. ❑ 3. Multi -Level Astronomical Time -Switch Controls, in addition to meeting all of the requirements for Astronomical Time -Switch Controls, includes at least 2 separately programmable steps per zone. ❑ F. The EMCS or Lighting Control System functions as one or more of the Daylighting Controls listed below: CA Building Energy Efficiency Standards -2016 Nonresidential Compliance January 2016 STATE OF CALIFORNIA ENERGY MANAGEMENT CONTROL SYSTEM OR LIGHTING CONTROL SYSTEM CFC-NRC1-LTI-02E rRavh;ed01M CALIFORNIA ENERGY COMMISSION CERTIFICATE OF INSTALLATION NRCI-LTI-02-E Energy Management Control System or Lighting Control System (Page 3 of 6) Pro)ed Name: THOMAS POWELL Enforcement Agency: NEWPORT BEACH vermis Number. x(2019-0534 PraleR.Aeeress: 895 DOVE ST. 41MT 133 c""' WWPORT SEA0i : zio cede: 926513 ❑ 1. Automatic Daylight Controls meet all requirements for Automatic Daylight Control -devices in the Title 20 Appliance Efficiency Regulations, including the following: a. is capable of reducing the power consumption in response to measured daylight either directly or by sending and receiving signals; b. If the system includes a dimmer, complies with the Dimmer Control device requirements in the Title 20 Appliance Efficiency Regulations. c. Automatically return to its most recent time delay settings within 60 minutes when put in calibration mode; d. Has a set point control that easily distinguishes settings to within. 10% of full scale adjustment; e. Has a light sensor that has a linear response within 5% accuracy over the range of illuminance measured by the light sensor; f. Has a light sensor that is physically separated from where the calibration adjustments are made, or is capable of being calibrated in a manner that the person initiating the calibration is remote from the sensor during calibration to avoid influencing calibration accuracy; and g. Complies with the Title 20 requirements for photo controls if the system contains a photo control component ❑ 2. Photo Controls meet all requirements for Photo Control devices in the Title 20 Appliance Efficiency Regulations, including the following that it does not have a mechanical device that permits disabling of the control. ❑ G. The FMCS or Lighting Control System functions as a Dimmer and meets all requirements for a Dimmer Control device in the Title 20 Appliance Efficiency Regulations, including the following: 1. is capabte of reducing power consumption: by a minimtfm;of 65% when the dimmer is at its lowest level; 2. Includes an off position which produces a zero lumen output; and 3. Does not consume more than i watt per lighting dimmer switch leg when in the off position. 4. Dimmer controls that can directly control lamps provide electrical outputs to lamps for reduced flicker operation through the dimming range so that the light output has an amplitude modulation of less than 30% for frequencies less than 200 Hz without causing, premature lamp failure. 5. 4f -.designed for.use in three waysircults-incapable of turning:lightsoff, and to the level set by the dimmer if the lights are off. ❑ H- The EMCS or Lighting Control System meets the following requirements: 1. Is capable of automatically turning off controlled lights in the area no more than 30 minutes after the area has been vacated; 2. Allows all tights to be manually turned off regardless of the status of occupancy; and 3. Hasa visible status signal that indicates that the device is operating properly; or that it has failed or malfunctioned. The visible status signal may have an override switch that turns off the signal. 4. All occupant sensing devices that utilize ultrasonic radiation for detection of occupants meet the Ultrasound Maximum Decibel Values in the Title 20 Appliance Efficiency Regulations 5. All occupant sensing devices that utilize microwave radiation for detection of occupants meet the radiation requirements in the Title 20 Appliance Efficiency Regulations 6. Occupant sensing devices incorporating dimming comply with the requirements for dimmer controls in the Title 20 AppUance:Efficiency,Reguiations CA Building Energy Efficiency Standards - 2016 Nonresidential Compliance January2016 STATE OF CALIFORNIA ENERGY MANAGEMENT CONTROL SYSTEM OR LIGHTING CONTROL SYSTEM:, f.F(:-NRr:I-LTI M?-F rRmry MhgN CERTIFICATE OF INSTALLATION VVrvNRCI-LTI-02-E Energy Management Control System or lighting Control System (Page 4 of 6) Pmiea Name: THOMAS POWELL EnfarcemeM Agenry: NEWPORT BEACH F.0 Number: X2019-0534 P`ejea Address: a95DOVEST.DN#7111 'm' NEWPORT BEACH Zip cede: 92660 7. The EMCS or Lighting Control System functions as one or more of the Occupant Sensing Controls Checked Below; ED a. Occupant Sensors meeting all applicable requirements for Occupant Sensor Control devices in the Title 20 Appliance Efficiency Regulations. ED b. Motion Sensors meeting all applicable requirements for Motion Sensor Controls devices in the Title 20 Appliance Efficiency Regulations, including that motion sensors are rated for outdoor use. ❑ c. Vacancy Sensors meeting all applicable requirements for Vacancy Sensor Controls devices in the Title 20 Appliance Efficiency Regulations, including the following: I. Does not turn on lighting automatically and does not incorporate DIP switches, or other manual means, for conversion between manual and automatic functionality, ii. Has a grace period of no more than 30 seconds and no less than 15 seconds to turn on lighting automatically after the sensor has timed out; and ill. Does not have an override switch that disables the sensor. ❑ d. Partial -ON Sensors meeting all applicable requirements for partial on sensing devices in the Title 20 Appliance Efficiency Regulations,.including the following: i. Has two poles each with automatic -off functionality; ii. Has one pole that is manual -on and does not incorporate DIP switches, or other manual means, for conversion between manual and automatic functionality; and M. Has one pole that is automatic -on and is not be capable of conversion by the user to manual -on functionality. ❑ e. Partial -OFF Sensors meet all applicable requirements for partial off sensing devices in the Title 20 Appliance Efficiency Regulations, including the following: L Has two poles, ii. Has one pole that is manual -on and manual off; and ill. Has one pole that is automatic -on and automatic -off and is not capable of conversion by the user to manual -on only functionality. El f. Occupant Sensing Control systems consist of a combination of single or multi-level Occupant, Motion, or Vacancy Sensor Controls, and all components installed to comply with manual -on requirements are not capable of conversion by the user from manual -on to automatic -on functionality. CA Building Energy Efficiency Standards - 2016 Nonresidential Compliance January 2016 STATE OF CALIFORNIA ENERGY MANAGEMENT CONTROL SYSTEM OR LIGHTING CONTROL SYSTEM CEC-NRCI-1-Ti-02-E fReVr^ dOARCI CALI-ORNIAENERG_v I....mc... CERTIFICATE OF INSTALLATION VV NRCI-LTI-02-E Energy Management Control System or Lighting Control System (Page 5 of 6) ProjeRName: THOMAS POWELL EnfomeneMAgerW: NEWPORT BEACH Perm it Number: X2019-0534 aroiea Address:99S DOVE. ST. UNIT 111 aty: NEWPORT BEACH I z`"code`92660 PART 3 Requirements far which thecontrol is being installed to complied with - Identify all requirements in the Standards for which the EMCS or Lighting Control System is installed to function as and complies with: Check all that are applicable A. Section 130.1(a) Area Controls, B. Section 130.1(6) Multi -Level Lighting Controls [) C. Section 130.1(c) Shut -OFF Controls D. Section 130.1(d) Automatic Daylighting Controls. ❑ E. Section 130.1(e) Demand Responsive Controls. ❑ F. -Section 130.5 (d) Circuit Controls for120-Volt Receptacles. If installed to qualify far a Power Adjustment Factor, submit this Installation Certificate in addition to the PAF Installation Certificate. ❑ G. To qualify for the PAF for a Partial -ON Occupant Sensing Control in TABLE 140.6-A. ❑ H. To qualify for the PAF for an occupant sensing control controlling the general lighting in large open plan office areas above workstations, in accordance with TABLE 140.6-A ❑ 1. To qualify for the PAF for a Manual Dimming System PAF or a Multiscene Programmable Dimming System PAF in TABLE 140.6-A ❑ J. To qualify for the PAF for a Demand Responsive Control in TABLE 140.6-A ❑ R. To qualify for the PAF for Combined Manual Dimming plus Partial -ON Occupant Sensing Control in TABLE 140.6-A CA Building Energy Efficiency Standards - 2016 Nonresidential Compliance January 2016 STATE OF CALIFORNIA ENERGY MANAGEMENT CONTROL SYSTEM OR LIGHTING CONTROL SYSTEM. `, CEC-NRCI-tTi-02-E RVASed 611'tS CALiFORNM ENERGY COMM155ION CERTIFICATE OF INSTALLATION NRCI-LTI-02-E Energy Management Control System or Lighting Control System (Page 6 of 6) Project Name: THOMAS POWELL EnlonomentAgency: NEWPORT BEACH Permit Number. XZ019-0534 Project Address: 895 DOVE ST. UNIT ill toy: NEWPORT BEACH I z'pcotle: 92660 DOCUMENTATION•AUTHOR5 DECtARAT1ONSTATEMENT 1. 1 certify that this Certificate of Installation documentation is accurate and complete. Documentation Author Name: ROBERT MOON Documentation Author Signature: Documentation Author Company Name: JESCO ELECTRIC INC. Date Signed: 05/06/2019 Address: 26439 RANCHO PARKWAY SOUTH SUITE 130 CEA Certli:stion ideriMmUon(if appiicabht; TC -A813851 Ciry/State/Zip: LAKE FOREST, CA 92630 Phone: 949-215-9009 RESPONSIBLE PERSON'S DECLARATION STATEMENT I certify the following under penalty of perjury, under the laws of the State of California: 1. The information provided an this Certificate of Installation is true and.correct. 2. 1 am eligible under Division 3 of the Business and Professions Code in the applicable classification to accept responsibility for the system design, construction, or installation of features, materials, components, or manufactured devices for the scope of work identified on this Certificate of Installation and attest to the declarations in this statement (responsible builder/installer), otherwise 1 am an authorized representative of the responsible builder/installer. 3. The constructed or installed features, materials, components or manufactured devices (the installation) identified on this Certificate of Installation conforms to all applicable codes and regulations, and the installation conforms to the requirements given onthe plans and specifications approved by the enforcement agency. 4. 1 reviewed a•copy of the Certificate of Complianceapprovedby the enforcement agency that identifies the specific requirements for the scope of construction or installation identified on this Certificate of Installation, and I have ensured that the requirements that apply to the construction or installation have been met. S. I will ensure that a completed signed copy of this Certificate of Installation shall be posted, or made available w@hthe building permit(s) issued for the building, and made available to the enforcement agency for all applicable inspections. I understand that a completed signed copy of this Certificate of Installation is required to be included with the documentation the builder provides to the building owner occupancy- Responsiffitete auaderpnstaller Name: ROBERT MOON Responsible audderpnstaffer Signature: Company Name: limn lling5ubcontnuororGemmi Contmaoror PositionWithLumpany jrrtte): guader/Owren) JESCO ELECTRIC MC. ACCEPTANCE TECHNICIAN Address: 26439 RANCHO PARKWAY SOUTH SUITE 130 CSLa license. C10-833626 ercy/State/zip: LAKE FOREST, CA 92630 Phone 949-215-9009 Date signed: 05/06/2019 CA Building Energy Efficiency Standards - 2016 Nonresidential Compliance January 2016 STATE OF CALIFORNIA LIGHTING CONTROL ACCEPTANCE DOCUMENT IM1.01A_I Ttsv� 1a- ! ­l ew n<rxct CERTIFICATE OF ACCEPTANCE wnNRCA-LTI-02-A Lighting Control Acceptance Document (Page 1 of S) Pmject Name: THOMAS POWELL Enforcement Agex : NEWPORT BEACH iemut Number. X2019-05?; Weekdays ❑ vrgect AdEress: 895 DOVE ST. UNIT 111 cnr NEWPORT BEACHa'Bede:92660 ❑ Note: For more than 3 spaces attach additional sets of pages 2 Enforcement Agency Use: Checked by/Date 001R'053 through 5, as required. Automatic Shut-off Controls: Automatic Time Switch Control and Occupant Sensor Intent: Lights are turned off or set to a lower level when not needed per Section 110.9fai & 130.1/ci. Guidance This acceptance test compliance document must be filled out for all newly -installed lighting control systems of the fallowing types: 1. Automatic Time Switch Controls 11, Occupancy Sensors 111. Partial -OFF occupancy sensors IV. Partial -ON occupancy sensors V. Occupancy Sensors serving small zones in large open plan offices (only if used to claim a Power Adjustment Factor) For automatic daylighting controls use acceptance test compliance document NBCA-LTI-03-A; for demand responsive lighting controls, use acceptance test compliance douement NBCA-LTI-04-A. The tests on this certificate are required by Section 140.6(a)2 and 130-4(a) of the 2016 Building Energy Efficiency Standards, The tests themselves are described in Sections 140.6(a)2 and in Reference Appendix NA7-6. A. Construction Inspection Fill out Section A to cover spaces 1 through 3 that are functionally tested under Section B. Make as many copies of pages 2-5 as are required to test all spaces in the building, and attach to page 1. Instruments needed to perform tests include, but are not limited to: hand-held amperage meter, power meter, or light meter 01 Automatic Time Switch Controls Construction inspection—confirm for an listed in Section B a. Ail automatic time switch controls are programmed for (check all): ❑ Weekdays ❑ Weekend ❑ Holidays b. Document for the owner automatic time switch programming (check alt): ❑ Weekdays settings ❑ Weekend settings ❑ Holidays settings ❑ Set-up settings ❑ Preference program setting ❑ Verify the correct time and date is properly set in the time switch ❑ Verify the battery is installed and energized ❑ Override time limit is no more than 2 hours ❑ Occupant Sensors and Automatic Time Switch Controls have been certified to the Energy Commission in accordance with the applicable provision in Section 110.9 of the Standards; and model numbers for all such controls are listed on the Commission database as Certified Appliance and Control Devices 02 Occupancy Sensor Construction Inspection—confirm for all listed in Section B ❑✓ Occupancy sensors are not located within 4 feet of any HVAC diffuser Ultrasonic occupancy sensors do not emit audible sound 5 feet from source CA Building Energy Efficiency Standards- 2016 Nonresidential Compliance April 2016 STATE OF CALIFORNIA LIGHTING CONTROL ACCEPTANCE DOCUMENT CEC-NRCA.LTI-02-A IRevised nM191 �¢i B. Functional Testing of Lighting Controls VV CERTIFICATE OF ACCEPTANCE NRCA-LTI-02-A Lighting Control Acceptance Document (Page 2 of S) Pmiect Name: THOMAS-POWELL Emforeemem Agee,: NEWPORT BEACH Permit Number. X2029-05,. Pmjen Address: 895 DOVE ST. UNIT 111 0tv: NEWPORT BEACH Lp,tode: 92660 B. Functional Testing of Lighting Controls Representative Spaces Selected For every space in the building, conduct functional tests 1 through 5 below if applicable, if there are several geometrically similar spaces that use the same fighting controls, test only one space and list in the cells below which "untested spaces" are represented by that tested space. EXCEPTION: For buildings with up to seven (7) occupancy sensors,all occupancy sensors shall be tested. (NA7-6.2.3) Tested space/ room name: PRIVATE OFFICE 101 Space Type (office, corridor, etc)OFFICE ❑� 01 Untested areas/rooms Tested space/ room name: Space Type (office, corridor, etc) ❑ 02 Untested areas/rooms Tested space/ room name: Space Type (office, corridor, etc) ❑ 03 Untested areas/rooms Functional Tests Tested. Space Number Confirm compliance (Yes/No) for all control system types (1-5) present in each space: 01. Automatic Time Switch Controls 1 2 3 Step 1: Simulate occupied condition a. I All lights can be turned on and off by their respective area control switch Verify the switch only operates lighting in the ceiling -height partitioned area in which Pb. the switch is located 2: Simulate unoccupied condition All lighting, including emergency and egress lighting, turns off. Exempt lighting may a. ..remain on per Section 130.1(c)Z and 1301(ajl. Manual override switch controls only the tights in the selected ceiling height b partitioned space where the override switch is located and the lights remain on no longer than 2 hours (unless serving public areas and override switch is captive key type). Step 3: System returned to initial operating conditions 02. Occupancy Sensors 1 2 3 Step 1: Simulate an unoccupied condition Lights controlled by occupancy sensors turn off within a maximum of 20 minutes a. from start of an unoccupied condition per Standard Section 110.9(b) Yes b The occupant sensor does not trigger a false "on" from movement in an area adjacent to the controlled space or from HVAC operation Yes Step 2: Simulate an occupied condition a. Status indicator or annunciator operates correctly yes Lights controlled by occupancy sensors turn on immediately upon an occupied b. condition OR sensor indicates space is "occupied" and fights may be turned on Yes manually Step 3: System returned to initial operating conditions Yes CA Building Energy Efficiency Standards - 2016 Nonresidential Compliance April 2016 STATE OF CALIFORNIA LIGHTING CONTROL ACCEPTANCE DOCUMENT CEC-NRCA-LTi-02-A (Revised 041161 03. Partial Off Occupancy Sensor 1 2 3 4V CERTIFICATE OF ACCEPTANCE NRCA-LTI-02-A Lighting Control Acceptance Document (Page 3 of 5) Project Name: THOMAS Eef .."l.lg _ NEWPORT BEACH Permit Number. X2019-05-' Reject Add.: 895 DOVE ST. UNIT 111 � NEWPORT BEACH ¢ - 3 �� 92660 03. Partial Off Occupancy Sensor 1 2 3 Step 1: Simulate an unoccupied condition Lights go to partial off state within a maximum of 20 minutes from start of an a. unoccupied condition per Standard Section 110.9(a) The occupant sensor does not trigger a false "on" from movement in an area adjacent b to the controlled space or from HVAC operation. for library book stacks or warehouse aisle, activity beyond the stack or aisle shall not activate the lighting in the aisle or stack. In the partial off state, lighting shall consume no more than 50% of Installed lighting power, or: • No more than 60% of installed lighting power for metal halide or high pressure sodium lighting in warehouses. C. • No more than 60•/6 of installed fighting g g power for corridors and stairwells in which the installed lighting power is 8055 or less of the value allowed under the. Area Category Method. Light level may be used as a proxy for lighting power when measurements are taken Step 2: Simulate an occupied condition The occupant sensing controls shall turn lights fully ON in each separately controlled a' areas, immediately upon an occupied condition 04. Partial On Occupancy Sensors 1 2 3 Step 1. -Simulate an occupied condition. Verify partial on operation. a' Immediately upon an occupied condition, the first stage activates between 50 to 70% of the lighting automatically. After the first stage occurs, manual switches allow an occupant to activate the b. alternate set of lights, activate 100% of the lighting power, and manually deactivate all of the lights. Step 2. Simulate an unoccupied condition stages (automatic on and manual on) lights turn off within a maximum of 20 Fb.Both minutes from start of an unoccupied condition per Standard Section 110.9(a) The occupant sensor does not trigger a false "on" from movement in an area adjacent to the controlled space or from HVAC operation. CA Building Energy Efficiency Standards -2016 Nonresidential Compliance April 2016 STATE OF CALIFORNIA LIGHTING CONTROL ACCEPTANCE DOCUMENT CEC-NRCA-LTi-02-A(Revised 04176 na CALSFO of MYk ENERGY COMM 05. Additional test for Occupancy Sensors Serving Small Zones in Office Spaces Larger than 250 fe, to Qualify for a Power Adjustment Factor (PAF) ISSION CERTIFICATE OF ACCEPTANCE NRCA-LTI-02-A Lighting Control Acceptance Document (Page 4 of 5) ProjeR Name: THOMAS PO WELL Enfartement Agerxy: NEWPORT BEACH Permi[Nvmber. X2019-05? ^. ProteaAdd., 895 DOVE ST. UNIT 111 NEWPORT BEACH �� 92660 05. Additional test for Occupancy Sensors Serving Small Zones in Office Spaces Larger than 250 fe, to Qualify for a Power Adjustment Factor (PAF) ; 2 3 First, complete Functional Test 2 (above) for each controlled Zone Step 1. Verify area served and compare actual PAF with claimed PAF. Refer to Functional Test It. a. Area served by controlled lighting (ft) 1 Automatic Time Switch controls (all answers must be yes). b" Enter PAF corresponding to controlled area from tinea) above (<125 ftzfor PAF=0.4, 126-250 ftZfor PAF=0.3, 251-500 ft2for PAF=0.2). pass c. Enter PAF claimed for occupant sensor control in this space from the Certificate of Compliance. book stacks, corridors, stairwells in nonresidential buildings must also be d' The PAF corresponding to the controlled area (line b), is greater than or equal to the PAF claimed in the compliance documentation (line c). accompanied by passing Test I or Test II. a Sensors shall not trigger in response to movement in adjacent walkways or workspaces. 4 Partial On Occupant Sensor for PAF (ail answers must be Yes). f All steps are conducted in Functional Test 2 "Occupancy Sensor (On Off Control)" and all answers are Yes. pass Test If. C. Testing Results PASS J PASS J PASS j FAIL FAIL FAIL 1 Automatic Time Switch controls (all answers must be yes). 2 Occupancy Sensor (On Off control) (all answers must be Yes). pass 3 Partial Off Occupancy Sensor (all answers must be Yes). For warehouses, library book stacks, corridors, stairwells in nonresidential buildings must also be accompanied by passing Test I or Test II. 4 Partial On Occupant Sensor for PAF (ail answers must be Yes). 5 Occupant Sensor serving small zones for PAF (all answers must be Yes). Also must pass Test If. D. Evaluation ❑PASS: All applicable Construction inspection responses are complete and all applicable Equipment Testing Requirements d responses are positive (Y -yes). CA Building Energy Efficiency Standards - 2016 Nonresidential Compliance April 2016 STATE OF CALIFORNIA .. � LIGHTING CONTROL ACCEPTANCE DOCUMENT �= �'� CEC-NRCA-LTI-02-A (Revised 0416) CALIFORNIAEYYERGY COMMRSSION CERTIFICATE OF ACCEPTANCE NRCA-LTI-02-A Lighting Control Acceptance Document (Page 5 of 5) Protect Name: 7HOMA5 POWELL omemen�agen rNEWPORT BEACH venna Number: X2019-05'" Pmien AOd,a,n 895 DOVE ST- UNIT III [,�; NEWPORT BEACH92660 City/State/bo. LAKE FOREST, CA 92630 DOCUMENTATION AUTHOR'S DECLARATION STATEMENT 1. 1 certify that this Certificate of Acceptance documentation is accurate and complete. Documentation author Name: ROBERT MOON Documentation Author signature: Documentation Author Company Name: )FSCO ELECTRIC INC. Data Signed:OS/05/2019 Address: 26439 RANCHO PARKWAY SOUTH SUITE 130 CEA/ATTCertittation Identification ( Ifapplizb:e):TC-A813851 City/State/bo. LAKE FOREST, CA 92630 Phopr '949-215-9009 FIELD TECHNICIAN'S DECLARATION STATEMENT I certify the following under penalty of perjury, underthe laws of the State of California: 1. The information provided on this Certificate of Acceptance is true and correct. 2. 1 am the person who performed the acceptance verification reported on this Certificate of Acceptance (Feld Technician). 3. The construction or installation identified on this Certificate of Acceptance complies with the applicable acceptance requirements indicated in the plans and specifications approved by the enforcement agency, and conforms t0 the applicable acceptance requirements and procedures specified in Reference Nonresidential Appendix NA7. 4. 1 have confirmed that the Certificate(si of installation forthe construction or installation identified on'this Certificate of Acceptance has been completed and signed by the responsible builder/installer and has been posted or made available with the building permit(s) issued for the building. Field Technician Name: ROBERT MOON Field Technician Signature: Field Technician Company Name: JESCO ELECTRIC INC Position with company (Title): ACCEPTANCE TECHNICIAN Address: 26439 RANCHO PARKWAY SOUTH SUITE 130 ATTCeGfiaboa idendnadon(it app5cabte): TC-ASI385Y Cny/sta"P: LAKE FOREST, CA 92630 Phan, 949-215-9009 Date sgred: 05/06/2019 RESPONSIBLE PERSON'S DECLARATION STATEMENT I certify the following under penalty of perjury, under the laws of the State of California: 1. 1 am the Field Technician, or the Field Technician is acting on my behalf as my employee or my agent and 1 have reviewed the information provided on this Certificate of Acceptance. 2. lam eligible under Division 3 of the Business and Professions Code in the applicable classification to accept responsibility for the system design, construction or installation of features, materials, components, or manufactured devices for the scope of work identified on this Certificate of Acceptance and attest to the declarations in this statement (responsible acceptance person). 3. The information provided on this Certificate of Acceptance substantiates that the construction or installation identified on this Certificate of Acceptance complies with the acceptance requirements indicated in the plans and specifications approved by the enforcement agency, and conforms to the applicable acceptance requirements and procedures specified in Reference Nonresidential Appendix NA7. 4. I have confirmed that the Certificates) of Installation for the construction or installation identified on ti» s Certificate of Acceptance has been completed and is posted or made available with the building permit(s) issued for the building. S. i will ensure that a completed, signed copy of this Certificate of Acceptance shall be posted, or made available with the building permit(s) issued for the building, and made available to the enforcement agency for all applicable inspections. I understand that a signed copy of this Certificate of Acceptance is required to be included with the documentation the builder provides to the building owner at occupancy. Responsible Acceptance Person Name: ROBERT MOON Responsible Acceptance Person signaium7 Responsible Acceptance Person Company Name: IESCO ELECTRIC INC. Position wsp: Company Intlel:I ACCEPTANCE - TECHNICIAN Address: 26439 RANCHO PARKWAY SOUTH SUITE 130 tsta L ms$ C10-833626 City/state)zp: LAKE FOREST, CA 92630 Phone: 949-215-9009 Date signed: 05/06/2019 CA Building Energy Efficiency Standards - 2016 Nonresidential Compliance April 2016 STATE OF CALIFORNIA INDOOR LIGHTING CEC:NRCI-LTI-111-E TRemsed U1N6) CERTIFICATE OF INSTALLATION NRCI-LTI-01-E Indoor Lighting Page d Project Name: THOMAS POWELL Eotmcement agency: NEWPORT REACH Permit Number: X2019-0534 PrujeaMd.r: W950OVEST. twff 111 0 Hotel/Motel (Common Area) 92660 GENERAL INFORMATION )(.201q -053U DATE OF BUILDING PERMIT: 03/25/2019 PERMIT NUMBER: X2019-0534 BUILDING TYPE: 0 Nonresidential ❑ High -Rise Residential (common area) 0 Hotel/Motel (Common Area) PHASE OF CONSTRUCTION: © New Construction ❑ Addition ©. Alteration ❑ Unconditioned SCOPE OF RESPONSIBILITY Enter the Wate of -approval: by enforcement agency of the Certiftate of COmpitame-that provides the specifications for the energy efficiency measures for the scope of responsibility for this fnstaffation Certificate. Oate: In the table below identify all applicable construction documents that specify the requirements for the scope of responsibility reported by this Installation Certificate (continued). Document Title or Description Applicable Sheets or Pages, Tables, Date Approved by Schedules, etc. Enforcement Agency . UGHTING PLAN E-3.0 4Y3/25J2019 Add Row Remove Last CA Building. Energy:EfficiencvStandards - 2016. Nonresidential Compliance January 2016 STATE OF CALIFORNIA INDOOR LIGHTING CEC-NRCI-LTI-01-E eviseti 61his CALIFORNIA ENERGY COMMISSION 0 CERTIFICATE OF INSTALLATION NRCI-LTI-01-E Indoor.Ligbting -Page of Proiea name: THOMAS POWELL rntwrement Agency: NEWPORT BEACH Permanumber. X2019-0534 P(glectAddress:.895BOVEST. t3lP4BTIII "y: MWPORT BEACH ZiPCade.-92fitO DOCUMENTATION,AUTHOR'S DECLARATION'SfATEMENT 1. 1 -certify thattttis Leltificateof lnstaRation doctimentatian is accurate and complete. Documentation Auth.r Name:ROBERT MOON Documentation Author Signature: l Documentation Author[ompany Name:JESCO ELECTRIC INC. Date signed OS/06/2019 Address:26434 RANCHO PARKWAYSOUTH SUITE 130 CEA Certificatum Identificstion(if applicable): TC -A813851 Gty/Statelap:LAKE FOREST, CA 92630 """949.215-9009 RESPONSfBLE PERSOUL'S DECLARA"GM. STATEMENT I certify the following under penalty of perjury, under the laws of the State of California: 1. The information provided on this Certificate of Installation is true and correct. 2. 1 am eligible under Division 3 of the Business and Professions Code in the applicable Classification to accept responsilfity for the system design, construction, or installation of features, materials, components, or manufactured devices for the scope of work identified on this Certificate of Installation and attest to the declarations in this statement (responsible builder/installer), otherwise i am an authorized representative of the responsible builder/installer. 3. The constructed or installed features, materials, components or manufactured devices {the installation) identified on this Certificate sof installation confarms.to all applicable -codes and,regulations, and the Jastallation conforms tothe sequirements given on the plans and specifications approved by the enforcement agency. 4. 1 reviewed a copy of the Certificate of Compliance approved by the enforcement agency that identifies the specific requirements for the scope of construction or installation identified on this Certificate of installation, and I have ensured that the requirements that apply to the construction or installation have been met. S. I will ensure that a completed signed copy of this Certificate of Installation shall be posted, or made available with the building permit(s) issued for the building, and made available to the enforcement agency for all applicable inspections. I understand that a completed signed copy of this Certificate of Installation is required to be included with the documentation the builder provides to the building owner at occupancy. Responsible Builder/lnstaifer Name:RQBERTMOON Responsrbte BudtlerdMstallisr siitc.i.: Company Name: (installing SubconttactorwGenesiCmtradefor Suitder/Owner) Position with Company (Td1ej: JESCO ELECTRIC INC. ACCEPTANCE TECHNICIAN Address:26439 RANCHO PARKWAY SOUTH SUITE 130 CSLS License: C10-833626 City/state/zip:LAKE FOREST, CA 92630 Phan 949-215-9009 Date Signed:05J06J2019 CA Building Energy Efficiency Standards - 2016 Nonresidential Compliance- January 2016