Loading...
HomeMy WebLinkAbout08 - Purchase Agreement for the Purchase of a Type 3 Wildland Fire ApparatusQ SEW Pp�T CITY OF z NEWPORT BEACH c�<,FORN'P City Council Staff Report April 14, 2020 Agenda Item No. 8 TO: HONORABLE MAYOR AND MEMBERS OF THE CITY COUNCIL FROM: Jeff Boyles, Fire Chief - 949-644-3101, jboyles@nbfd.net PREPARED BY: Mary Locey, Fire Administrative Manager, mlocey@nbfd.net PHONE: 949-644-3352 TITLE: Approval of a Purchase Agreement with South Coast Fire Equipment, Inc. for the Purchase of a Type 3 Wildland Fire Apparatus /_1 16*1 d:7_T" The Fiscal Year 2019-20 budget includes funding for the Fire Apparatus. A Type 3 apparatus allows for the Fire capabilities while lowering costs. With its ability to drive will provide for critical, time -saving deployment and ac city's remote and rough terrain. RECOMMENDATIONS: purchase of a Type 3 Wildland Department to enhance service off road, the Type 3 fire engine cess to the southern -end of the a) Determine this action is exempt from the California Environmental Quality Act (CEQA) pursuant to Sections 15060(c)(2) and 15060(c)(3) of the CEQA Guidelines because this action will not result in a physical change to the environment, directly or indirectly; and b) Approval of a Purchase Agreement with South Coast Fire Equipment, Inc. for a not to exceed amount of $509,902.44 for the purchase of a Pierce Manufacturing Type 3 Wildland Interface Fire Apparatus. FUNDING REQUIREMENTS: The current adopted budget includes sufficient funding for this $509,902 purchase. Funds are set aside annually in an internal service fund to ensure critical equipment and infrastructure can be replaced on a perpetual basis. This purchase will be expensed to the vehicle replacement equipment fund (Account No. 7529032-911016). DISCUSSION: The Fire Department operates a fleet of eight frontline fire engines and three reserve engines. The frontline engines are in service 24 hours per day, seven days per week, and are assigned to the eight fire stations strategically located throughout the city. The three reserve engines are deployed when necessary during significant events within the City or when crews are required to respond to mutual -aid requests such as wildfires in other jurisdictions. The units and ages of the engines currently in service are shown in the table below. RX Approval of a Purchase Agreement with South Coast Fire Equipment, Inc. for the Purchase of a Type 3 Wildland Fire Apparatus April 14, 2020 Page 2 # ApparatusUnit 2402 Engine 61 2010 Pierce Manufacturing Frontline 63,154 2471 Engine 62 2014 Pierce Manufacturing Frontline 65,136 2472 Engine 63 2014 Pierce Manufacturing Frontline 65,123 2403 Engine 64 2010 Pierce Manufacturing Frontline 64,686 2473 Engine 65 2014 Pierce Manufacturing Frontline 56,717 2475 Engine 66 2015 Pierce Manufacturing Frontline 30,128 2474 Engine 67 2014 Pierce Manufacturing Frontline 52,058 2476 Engine 68 2015 Pierce Manufacturing Frontline 25,002 2415 Reserve 1 2005 American LaFrance Reserve 79,175 2410 Reserve 2 2003 American LaFrance Reserve 103,825 2411 Reserve 3 2003 American LaFrance Reserve 105,409 Per City Council Policy F-9, City Vehicle / Equipment Replacement Guidelines, the replacement schedule for fire engines is 13 years for frontline engines and five to seven additional years for reserve engines. Type 3 Wildland Fire Apparatus The purchase of a Type 3 wildland fire apparatus was added to the FY 2019-20 budget because the department recognized the need for an engine to access the remote and rough terrain located in Newport Coast and Corona del Mar. When incidents occur in these remote locations, the department's existing apparatus are not capable of handling the off-road conditions. Crews are required to hike in on foot and set down longer hose lays to reach the impacted area. Crews must wait for other agencies to respond with apparatus capable of reaching the area. Photo credit: Pierce Manufacturing, Inc. The Type 3 apparatus is built for off-road conditions with a higher ground clearance, a stronger engine, tires designed for rugged terrain, and a shorter -wheel base for improved turning radius. It will be housed at the Newport Coast Fire Station No. 8. This location will provide critical and early intervention in the event of a local wildland fire. FIN Approval of a Purchase Agreement with South Coast Fire Equipment, Inc. for the Purchase of a Type 3 Wildland Fire Apparatus April 14, 2020 Page 3 The apparatus can also be used daily for emergency responses. This will be the first time in the department's history that an engine specific for fighting wildland fires will be added to the fleet. In addition to the benefits identified above, purchasing a Type 3 engine is significantly less (roughly 35%) than purchasing a standard fire engine. Having a Type 3 engine readily available to respond allows the department to provide enhanced service and timely wildland protection to the community for less than the cost of a standard fire engine. This budgeted purchase replaces the Reserve 3 engine manufactured in 2003. This engine is one of the oldest, does not operate efficiently, obtaining replacement parts is difficult, and it is due to be replaced. The estimated delivery for the Type 3 engine is approximately 450 days. Per the purchase agreement, failure to deliver the apparatus to the City will incur liquidated damages of $100 per day. Equipment Consolidation The Fire Department started purchasing fire apparatus in 2010 from Pierce Manufacturing, Inc. (Pierce) located in Appleton, Wisconsin. Since then, a total of eight fire engines and two ladder trucks manufactured by Pierce have been added to the department's fleet. Pierce builds fire apparatus with innovative proprietary technology that has proven to be reliable over the last ten years of use by the department. The benefits of having a standardized fleet for fire operations allows for personnel to easily transition across the eight fire stations without the need for excessive training on different apparatus. The dash layout, switches and equipment storage are virtually the same. These are critical time -saving elements during emergency response situations. From a maintenance standpoint, there is a reduction in the type and amount of training required for the fleet mechanics and they can stock similar replacement parts for use throughout the fleet, which is easier to manage. To maintain consistency for fire personnel as well as fleet maintenance personnel, staff recommends purchasing a Type 3 apparatus from Pierce Manufacturing through its designated Southern California dealer, South Coast Fire Equipment Company, Inc. Staff requests City Council approval to forego the competitive bidding procedures pursuant to Council Policy F-14, which is normally applicable to an equipment purchase of this amount and scope, taking into consideration the benefits detailed in this section of fleet consolidation and the fact that no other dealer aside from South Coast Fire Equipment Company, Inc. can provide the City with pricing on Pierce apparatus. This single source purchase approval request is being made because a direct purchase in this instance serves as a greater benefit to the City as opposed to conducting a bid. South Coast Fire Equipment, Inc. provided a price quote for the requested apparatus, which includes a discount of $13,161 for the Type 3 apparatus in exchange for full prepayment (See cost breakdown on next page). In order to mitigate any risk associated with this prepayment arrangement, the vendor has agreed to secure a Faithful Performance Bond that will protect the City and serve as a guarantee of product delivery. FIN Approval of a Purchase Agreement with South Coast Fire Equipment, Inc. for the Purchase of a Type 3 Wildland Fire Apparatus April 14, 2020 Page 4 Pierce Type 3 Wildland Interface Pumper $485,028.16 100% Prepayment Discount ($13,161.00) Apparatus Cost $471,867.16 Sales Tax (7.75%) $36,569.70 Performance Bond $1,455.08 California Tire Fee $10.50 Total Prepayment Purchase Price $509.902.44 Based on additional conversations with the vendor, they have made assurances that the current pandemic will not impact the delivery date of the engine. Even though no competitive bidding was administered for this purchase, staff performed a due diligence analysis of the proposed pricing, comparing it to prices paid for by other fire agencies. Staff found the pricing to be consistent with recent purchases of Pierce fire apparatus. There is enough funding available in the FY 2019-20 budget for the purchase. ENVIRONMENTAL REVIEW: Staff recommends the City Council find this action is not subject to the California Environmental Quality Act (CEQA) pursuant to Sections 15060(c)(2) (the activity will not result in a direct or reasonably foreseeable indirect physical change in the environment) and 15060(c)(3) (the activity is not a project as defined in Section 15378) of the CEQA Guidelines, California Code of Regulations, Title 14, Chapter 3, because it has no potential for resulting in physical change to the environment, directly or indirectly. NOTICING: The agenda item has been noticed according to the Brown Act (72 hours in advance of the meeting at which the City Council considers the item). ATTACHMENT: Attachment A — Purchase Agreement for Type 3 Wildland Fire Apparatus ATTACHMENT A PURCHASE AGREEMENT FOR ONE (1) 2020 PIERCE TYPE 3 WILDLAND INTERFACE PUMPER FROM SOUTH COAST FIRE EQUIPMENT, INC. This Purchase Agreement ("Agreement") is entered into as of this _ day of April, 2020 ("Effective Date"), by and between the CITY OF NEWPORT BEACH, a California municipal corporation and charter city ("City"), and SOUTH COAST FIRE EQUIPMENT INC., a California corporation ("Vendor"), whose principal place of business is 2020 South Baker Avenue, Ontario, California 91761. RECITALS A. City is a municipal corporation duly organized and validly existing under the laws of the State of California with the power to carry on its business as it is now being conducted under the statutes of the State of California and the Charter of City. B. City requires one (1) 2020 Pierce Type 3 Wildland Interface Pumper mounted on a Freightliner chassis ("Equipment") as set forth in Exhibit A, which is attached and incorporated herein by this reference. C. Vendor has carefully reviewed and evaluated the specifications set forth by the City for the Equipment and has committed to deliver the Equipment required for the price specified in this Agreement within Four Hundred Fifty (450) calendar days commencing upon execution of this Agreement. D. City has solicited and received a proposal from Vendor's agent, has evaluated the expertise of Vendor, and desires to submit an order for the Equipment under the terms and conditions set forth in this Agreement. NOW, THEREFORE, in consideration of the mutual representations, warranties and covenants, and other terms and conditions as set forth herein, Vendor and City (each a "Party" and together the "Parties") agree as follows: 1. TERM The Term of this Agreement shall commence on the Effective Date and shall terminate on October 31, 2021 unless terminated earlier as set forth herein. 2. COMPENSATION 2.1 City shall choose the discounted purchase price as more fully described in the Pricing Proposal attached hereto as Exhibit B and incorporated herein by reference. The purchase price for Equipment, including all sales taxes, shall not exceed Five Hundred Nine Thousand Nine Hundred Two Dollars and 441100 ($509,902.44) ("Discounted Purchase Price"). Subject to the provisions of Section 7 relating to City's self -accrual of sales taxes, the City shall pay Vendor Discounted Purchase Price in full upon execution of this Agreement. South Coast Fire Equipment Inc. Page 1 2.2 Vendor agrees to accept the Discounted Purchase Price as full remuneration for delivery to City of the Equipment. The Discounted Purchase Price shall be referred to as "Total Compensation." 3. ADMINISTRATION This Agreement will be administered by the City's Fire Department. The Fire Chief, or designee, shall be the Purchase Administrator and shall have the authority to act for City under this Agreement. The Purchase Administrator or designee shall represent City in all matters pertaining to the services to be rendered pursuant to this Agreement. 4. DELIVERY 4.1 Delivery to City of the Equipment shall be made within four hundred fifty (450) calendar days from the execution of the Agreement. 4.2 Delivery shall be made to the City's Yard at 592 Superior Avenue, Newport Beach, CA 92663, or such other location as may be designated by City in writing. Time of delivery is of the essence in this Agreement. City reserves the right to refuse the Equipment, or part thereof, and to cancel all or any part of the Equipment not conforming to applicable specifications, samples or descriptions. City shall receive a pro -rata refund for the Equipment, or part thereof, cancelled under this Agreement, within thirty (30) calendar days of City's cancellation. Acceptance of any part of the order for Equipment shall not bind City to accept future shipments nor deprive City of the right to return Equipment already accepted at Vendor's expense. Over shipments and under shipments of Equipment shall be only as agreed to in writing by City. Delivery shall not be deemed to be complete until all Equipment have actually been received and accepted in writing by the City. 4.3 Vendor shall submit all requests for extensions of time for delivery in writing to the City Purchase Administrator not later than ten (10) calendar days after the start of the condition that purportedly causes a delay. The Purchase Administrator shall review all such requests and may, at his/her sole discretion, grant reasonable time extensions for unforeseeable delays that are beyond Vendor's control. 4.4 The Parties agree that it is extremely difficult and impractical to determine and fix the actual damages that City will sustain should the Vendor fail to complete the delivery as called for in this Agreement. Should Vendor fail to complete the delivery as called for in this Agreement, Vendor agrees to the deduction of liquidated damages in the sum of One Hundred Dollars and 00/100 ($100.00) per day, for every day beyond the date scheduled for delivery provided in Section 4.1. Execution of this Agreement shall constitute agreement by the City and Vendor that the sum of One Hundred Dollars and 00/100 ($100.00) per day, is the minimum value of costs and actual damages caused by the failure of Vendor to deliver the Equipment within the allotted time. All liquidated damages shall be paid within ten (10) calendar days of City's written request for payment. Such sum is liquidated damages and shall not be construed as a penalty, and may be deducted from payments due the Vendor, or recovered from Vendor, as applicable, if such delay occurs. South Coast Fire Equipment Inc. Page 2 -1 5. ACCEPTANCE/ PAYMENT Unless otherwise agreed to in writing by City, acceptance of the Equipment shall not be deemed complete unless in writing and until all of the Equipment, including each part thereof, has actually been received, inspected and tested to the satisfaction of City. 6. NOTICES 6.1 All notices, demands, requests or approvals to be given under the terms of this Agreement shall be given in writing, and conclusively shall be deemed served when delivered personally, or on the third business day after the deposit thereof in the United States mail, postage prepaid, first-class mail, addressed as hereinafter provided. 6.2 All notices, demands, requests or approvals from Vendor to City shall be addressed to City at: Attn: Fire Chief Fire Department City of Newport Beach 100 Civic Center Drive PO Box 1768 Newport Beach, CA 92658 6.3 All notices, demands, requests or approvals from City to Vendor shall be addressed to Vendor at: Attention: Kevin Newell South Coast Fire Equipment, Inc. 2020 S. Baker Ave Ontario, CA 91761 7. TAXES The Total Compensation amount includes any and all applicable taxes and fees, including federal, state and/or local sales or use taxes. Under the City's Direct Payment Exemption permit number SF EAA 24-089475 DP, City shall self -accrue its Use Tax obligation to the California State Board of Equalization in the applicable amount within thirty (30) days of Equipment delivery to the City. If only partial delivery of Equipment is received, the City will only pay the State Board of Equalization the amount of Use Tax due on the value of the Equipment delivered. 8. ENTIRE AGREEMENT This Agreement contains the entire Agreement between the Parties with respect to all matters herein, and there are no restrictions, promises, warranties, or undertakings other than those set forth herein or referred to herein. No exceptions, alternatives, substitutes or revisions are valid or binding on City unless authorized by City in writing. Electronic acceptance of any additional terms, conditions or supplemental agreements by South Coast Fire Equipment Inc. Page 3 RIM any City employee or agent, shall not be valid or binding on City unless accepted in writing by the Purchase Administrator. The terms of this Agreement shall supersede any inconsistencies between this Agreement and the Exhibits hereto. 9. WARRANTY 9.1 Vendor expressly warrants that the Equipment covered by this Agreement is: 1) free of liens or encumbrances; 2) of merchantable quality and good for the ordinary purposes for which it is used; and 3) fit for the particular purpose for which it is intended. Acceptance of this Agreement shall constitute an agreement upon Vendor's part to indemnify, defend and hold City and its indemnities as identified in Section 15 below, and as more fully described in Section 15, harmless from liability, loss, damage and expense, including reasonable counsel fees, incurred or sustained by City by reason of the failure of the Equipment to conform to such warranties, faulty work performance, negligent or unlawful acts, and non-compliance with any applicable state or federal codes, ordinances, orders, or statutes, including the Occupational Safety and Health Act (OSHA) and the California Industrial Safety Act. Such remedies shall be in addition to any other remedies provided by law. 9.2 Vendor and manufacturer's warranties and certifications are attached hereto as Exhibit C, and incorporated in full by this reference. The Warranty Period shall commence on the date the Equipment is accepted by the City. All warranty repair work shall be conducted by a Vendor -certified dealer/agent in the Southern California region. 9.3 As of the Effective Date of this Agreement the Vendor -certified dealer/ agent for purposes of all repairs and warranty work is: South Coast Fire Equipment, Inc., 2020 S. Baker Avenue, Ontario, CA 91761. 9.4 In the event that Vendor designates a different certified dealer/agent for the Southern California region, Vendor shall provide City with written notice of such change within ten (10) days of the change. 10. ASSIGNMENT OR SUBCONTRACTING The terms, covenants, and conditions contained herein shall apply to and bind the heirs, successors, executors, administrators and assigns of the Parties. Furthermore, neither the performance of this Agreement nor any portion thereof may be assigned or subcontracted by Vendor without the express written consent of City. Any attempt by Vendor to assign or subcontract the performance or any portion thereof of this Agreement without the express written consent of City shall be invalid and shall constitute a breach of this Agreement. 11. TERMINATION 11.1 In the event that either Party fails or refuses to perform any of the provisions of this Agreement at the time and in the manner required, that Party shall be deemed in default in the performance of this Agreement. If such default is not cured within a period of two (2) calendar days after receipt of written notice of default specifying the nature of such default and the steps necessary to cure such default, or if more than two (2) calendar South Coast Fire Equipment Inc. Page 4 days are reasonably required to cure the default and the defaulting Party fails to give adequate assurance of due performance within two (2) calendar days after receipt of written notice of default, or thereafter fails to diligently take steps to cure the default, the non -defaulting Party may terminate the Agreement forthwith by giving to the defaulting Party written notice thereof. City shall be refunded all money for Equipment not delivered and accepted by City at time of termination within thirty (30) calendar days. Cause for default shall further be defined as any breach of this Agreement, any misrepresentation or fraud on the part of the Vendor and/or filing of any petition in U.S. Bankruptcy Court or entering of Bankruptcy by Vendor. 11.2 Notwithstanding the above provisions, City shall have the right, at its sole discretion without cause, of terminating this Agreement at any time by giving seven (7) calendar days prior written notice to Vendor. In the event of termination under this Section, City shall pay Vendor for services satisfactorily performed and costs incurred up to the effective date of termination for which Vendor has not been previously paid. City shall be refunded all money for Equipment not delivered and accepted by City at time of termination within thirty (30) calendar days. On the effective date of termination, Vendor shall deliver to City all equipment, reports, documents and other information developed or accumulated in the performance of this Agreement, whether in draft or final form. 12. CONSENT TO BREACH NOT WAIVER No term or provision of this Agreement shall be deemed waived and no breach excused, unless such waiver or consent shall be in writing and signed by the Party claimed to have waived or consented to such breach. Any consent by any Party to, or waiver of, a breach by the other, whether express or implied, shall not constitute consent to, waiver of, or excuse for any other different or subsequent breach. 13. REMEDIES NOT EXCLUSIVE The remedies for breach set forth in this Agreement are cumulative as to one (1) another and as to any other provided by law, rather than exclusive; and the expression of certain remedies in this Agreement does not preclude resort by either Party to any other remedies provided by law. 14. FAITHFUL PERFORMANCE BOND 14.1 Vendor shall perform all work under this Agreement, taking necessary steps and precautions to perform the work to City's satisfaction. Vendor shall be responsible for the professional quality, technical assurance, timely completion and coordination of all documentation and other Equipment or services furnished by the Vendor under this Agreement. Vendor shall perform all work diligently, carefully, and in a good and workman -like manner; shall furnish all labor, supervision, machinery, equipment, materials, and supplies necessary therefore; shall at its sole expense obtain and maintain all permits and licenses required by public authorities, including those of City required in its governmental capacity, in connection with performance of the work; and, if permitted to subcontract, shall be fully responsible for all work performed by subcontractors. South Coast Fire Equipment Inc. Page 5 .• 14.2 Vendor shall obtain, provide and maintain at its own expense during the term of this Agreement a Faithful Performance Bond in the amount of one hundred percent (100%) of the Total Compensation to be paid Vendor as set forth in this Agreement. The form of such Faithful Performance Bond is attached as Exhibit E and incorporated herein by reference. The Faithful Performance Bond shall be issued by an insurance organization or surety (1) currently authorized by the Insurance Commissioner to transact business of insurance in the State of California, (2) listed as an acceptable surety in the latest revision of the Federal Register Circular 570, and (3) assigned a Policyholders' Rating A- (or higher) and Financial Size Category Class VII (or larger) in accordance with the latest edition of Best's Key Rating Guide: Property -Casualty. 14.3. Vendor shall deliver, concurrently with execution of this Agreement, the Faithful Performance Bond and a certified copy of the "Certificate of Authority" of the Insurer or Surety issued by the Insurance Commissioner, which authorizes the Insurer or Surety to transact surety insurance in the State of California. 15. INDEMNIFICATION 15.1 To the fullest extent permitted by law, Vendor shall indemnify, defend and hold harmless City, its City Council, boards and commissions, officers, agents, volunteers, and employees (collectively, the "Indemnified Parties") from and against any and all claims (including, without limitation, claims for bodily injury, death or damage to property), demands, obligations, damages, actions, causes of action, suits, losses, judgments, fines, penalties, liabilities, costs and expenses (including, without limitation, attorney's fees, disbursements and court costs) of every kind and nature whatsoever (individually, a Claim; collectively, "Claims"), which may arise from or in any manner relate (directly or indirectly) to any breach of the terms and conditions of this Agreement, any work performed or services or equipment provided under this Agreement including, without limitation, defects in workmanship or materials (including the negligent and/or willful acts, errors and/or omissions of Vendor, its principals, officers, agents, employees, suppliers, consultants, subcontractors, anyone employed directly or indirectly by any of them or for whose acts they may be liable or any or all of them). 15.2 Notwithstanding any other provision of this Agreement to the contrary Vendor shall not be required to indemnify the Indemnified Parties from any and all Claims (a) arising from the sole or partial negligence (including, without limitation, active and pass negligence) or willful misconduct of the Indemnified Parties or their boards and commissions, officers, agents, volunteers, representatives, contractors, and employees, as well as any third parties, or (b) that are filed in court or any other administrative agency or asserted (in writing) against Indemnified Parties more than one (1) calendar year after the project and/or services contemplated by this Agreement are completed. The "active and passive negligence or willful misconduct" in the preceding sentence shall mean, without limitation or affecting the statutory and common law legal definition, Indemnified Parties failing to promptly follow written recommendations of Vendor arising out of or relating to the Equipment provided. Nothing in this indemnity shall be construed as authorizing any award of attorneys' fees in any action on or to enforce the terms of this Agreement. This indemnity shall apply to all claims and liability regardless of whether any insurance policies are applicable. The policy limits do not act as a limitation upon the South Coast Fire Equipment Inc. Page 6 M amount of indemnification to be provided by Vendor; provided however, that Vendor shall be reimbursed for any indemnification provided to Indemnified Parties from insurance policy benefits paid to Indemnified Parties arising out of or relating to the Claim. 16. CHARGES AND LIENS Vendor shall pay promptly all indebtedness for labor, materials and equipment used in performance of the work. Vendor shall not permit any lien or charge to attach to the Equipment, but if any does so attach, Vendor shall promptly procure its release and, in accordance with the requirements of Section 15 above, indemnify, defend, and hold City harmless and be responsible for payment of all costs, damages, penalties and expenses related to or arising from or related thereto. 17. INSURANCE Without limiting Vendor's indemnification of City, and prior to commencement of work, Vendor shall obtain, provide and maintain at its own expense during the term of this Agreement or for other periods as specified in this Agreement, policies of insurance of the type, amounts, terms and conditions described in the Insurance Requirements attached hereto as Exhibit D, and incorporated herein by reference. 18. CHANGE OF OWNERSHIP Vendor agrees that if there is a change or transfer in ownership of Vendor's business prior to completion of this Agreement, the new owners shall be required under terms of sale or other transfer to assume Vendor's duties and obligations contained in this Agreement and complete them to the satisfaction of City. 19. FORCE MAJEURE Vendor shall not be assessed with liquidated damages or unsatisfactory performance penalties during any delay beyond the time named for the performance of this Agreement caused by any act of God, war, civil disorder, employment strike or other cause beyond its reasonable control, provided that Vendor gives written notice of the cause of the delay to City within forty-eight (48) hours of the start of the delay and Vendor avails itself of any available remedies. 20. CONFIDENTIALITY Vendor agrees to maintain the confidentiality of all City and City -related records and information pursuant to all statutory laws relating to privacy and confidentiality that currently exist or exist at any time during the term of this Agreement. All such records and information shall be considered confidential and kept confidential by Vendor and Vendor's staff, agents, employees and subcontractors. 21. FREIGHT (F.O.B. DESTINATION) The Total Compensation includes shipment and delivery of Equipment tc designated City location. Vendor assumes full responsibility for all transportation, South Coast Fire Equipment Inc. Page 7 8-11 transportation scheduling, packing, handling, insurance, and other services associated with delivery of all products deemed necessary under this Agreement. 22. TERMS AND CONDITIONS Vendor acknowledges that it has read and agrees to all terms and conditions included in this Agreement. 23. SIGNATORIES AUTHORITY Each person executing this Agreement expressly warrants that he or she is authorized to do so on behalf of the entity for which he or she is executing this Agreement. The City and Vendor represent and warrant that this Agreement is executed voluntarily, with full knowledge of its significance. 24. STANDARD PROVISIONS 24.1 Recitals. City and Vendor acknowledge that the above Recitals are true and correct and are hereby incorporated by reference. 24.2 Compliance with all Laws. Vendor shall at its own cost and expense comply with all statutes, ordinances, regulations and requirements of all governmental entities, including federal, state, county or municipal, whether now in force or hereinafter enacted. 24.3 Integrated Contract. This Agreement represents the full and complete understanding of every kind or nature whatsoever between the Parties hereto, and all preliminary negotiations and Agreements of whatsoever kind or nature are merged herein. No verbal contract or implied covenant shall be held to vary the provisions herein. 24.4 Conflicts or Inconsistencies. In the event there are any conflicts or inconsistencies between this Agreement and the Exhibits attached hereto, the terms of this Agreement shall govern. 24.5 Amendments. This Agreement may be modified or amended only by a written document executed by both Vendor and City and approved as to form by the City Attorney. 24.6 Controlling Law and Venue. The laws of the State of California shall govern this Agreement and all matters relating to it and any action brought relating to this Agreement shall be adjudicated in a court of competent jurisdiction in the County of Orange, State of California. The California Commercial Code shall be the controlling law for the terms of this Agreement. 24.7 Equal Opportunity Employment. Vendor represents that it is an equal opportunity employer and it shall not discriminate against any subcontractor, employee or applicant for employment because of race, religion, color, national origin, handicap, ancestry, sex, age or any other impermissible basis under law. South Coast Fire Equipment Inc. Page 8 8-12 24.8 Interpretation. The terms of this Agreement shall be construed in accordance with the meaning of the language used and shall not be construed for or against either Party by reason of the authorship of the Agreement or any other rule of construction which might otherwise apply. 24.9 Severability. If any term or portion of this Agreement is held to be invalid, illegal, or otherwise unenforceable by a court of competent jurisdiction, the remaining provisions of this Agreement shall continue in full force and effect. 24.10 No Attorneys' Fees. In the event of any dispute or legal action arising under this Agreement, the prevailing Party shall not be entitled to attorneys' fees. 24.11 Counterparts. This Agreement may be executed in two or more counterparts, each of which shall be deemed an original and all of which together shall constitute one and the same instrument. [SIGNATURES ON NEXT PAGE] South Coast Fire Equipment Inc. Page 9 8-13 IN WITNESS WHEREOF, the Parties have caused this Agreement to be executed on the dates written below. APPROVED AS TO FORM: CITY ATTORNEY'S OFFICE Date: o_� (-7 By: 0 on C. Harp City Attorney ATTEST: Date: am Leilani I. Brown City Clerk Attachments CITY OF NEWPORT BEACH, a California municipal corporation and charter city Date: By: Will O'Neill Mayor CONTRACTOR: South Coast Fire Equipment, Inc., a California corporation Date: By: Kevin M. Newell Chief Executive Officer and Secretary [END OF SIGNATURES] Exhibit A: Specifications for One (1) 2020 Pierce Type 3 Wildland Interface Pumper Exhibit B: Pricing Proposal Exhibit C: Warranty Exhibit D: Insurance Requirements Exhibit E: Faithful Performance Bond South Coast Fire Equipment Inc. Page 10 EXHIBIT A CITY OF NEWPORT BEACH SPECIFICATIONS FOR ONE (1) 2020 PIERCE TYPE 3 WILDLAND INTERFACE PUMPERS [See attached] South Coast Fire Equipment Inc. Page A-1 8-15 South Coast Fire Equipment representing Pierce Manufacturing is pleased to submit a proposal to City of Newport Beach for a Pierce® TYPE 3 PUMPER/URBAN INTERFACE. per your request for quotation. The following paragraphs will describe in detail the apparatus, construction methods, and equipment proposed. This proposal will indicate size, type, model and make of components parts and equipment, providing proof of compliance with each and every item (except where noted) in the departments advertised specifications. The apparatus will be designed with the understanding that the primary use of this apparatus will be considered for structural fire fighting (NFPA 1901), however, some features may be provided that are Wildland specific (NFPA 1906) in nature. Those features and options, if provided and conflict with NFPA 1901, will be indicated as such and shall appear on the NFPA Exceptions Report. PIERCE MANUFACTURING was incorporated in 1913. Since then we have been building bodies with one (1) philosophy, "BUILD THE FINEST'. Our skilled craftsmen take pride in their work, which is reflected, in the final product. We have been building fire apparatus since the early "forties" giving Pierce Manufacturing over 75 years of experience in the fire apparatus market. Pierce Manufacturing has built and put into service more than 28,500 apparatus on commercial chassis, and more than 33,900 on Pierce custom chassis designed and built specifically for fire and emergency applications. Our Appleton, Wisconsin facility has over 870,000 total square feet of floor space situated on approximately 105 acres of land. Our Bradenton, Florida facility has 300,000 square feet of floor space situated on approximately 38 acres of land. A multi-million dollar inventory of parts is available to keep your unit in service long after it has left the factory. Our beliefs in high ethical standards are carried through in all of our commitments and to everyone with whom we do business. Honesty, Integrity, Accountability and Citizenship are global tenets by which we all live and work. Consequently, we neither engage in, nor have we ever been convicted of price fixing, bid rigging, or collusion in any domestic or international fire apparatus market. Pierce has only one brand of fire apparatus "Pierce", ensuring you are receiving top of the line product that meets your specification. In accordance with the current edition of NFPA 1901 standards, this proposal will specify whether the fire department, manufacturer, or apparatus dealership will provide required loose equipment. Images and illustrative material in this proposal are as accurate as known at the time of publication, but are subject to change without notice. Images and illustrative material is for reference only, and may include optional equipment and accessories and may not include all standard equipment. 1 of 78 SPECIFICATIONS GENERAL DESIGN AND CONSTRUCTION To control quality and ensure the compatibility of all the components, Pierce specifically designs the pump module, body, and electrical system to properly integrate and function with the commercial cab and chassis. All welding, assembly and paint work will be done in Pierce owned manufacturing facilities. This includes, but not limited to the pumphouse module assembly, the body and the electrical system QUALITY AND WORKMANSHIP Pierce has set the pace for quality and workmanship in the fire apparatus field. Our tradition of building the highest quality units with craftsmen second to none has been the rule right from the beginning and we demonstrate that ongoing commitment by: Ensuring all steel welding follows American Welding Society D1.1-2004 recommendations for structural steel welding. All aluminum welding follows American Welding society and ANSI D1.2-2003 requirements for structural welding of aluminum. All sheet metal welding follows American welding Society B2.1-2000 requirements for structural welding of sheet metal. Our flux core arc welding uses alloy rods, type 7000 and is performed to American Welding Society standards A5.20-E70T1. Furthermore, all employees classified as welders are tested and certified to meet the American welding Society codes upon hire and every three (3) years thereafter. Pierce also employs and American Welding Society certified welding inspector in plant during working hours to monitor weld quality. Pierce Manufacturing operates a Quality Management System under the requirements of ISO 9001. These standards sponsored by the International Organization for Standardization (ISO) specify the quality systems that are established by the manufacturer for design, manufacture, installation and service. A copy of the certificate of compliance is included with this proposal. In addition to the Quality Management system, we also employ a Quality Achievement Supplier program to insure the vendors and suppliers that we utilize meet the high standards we demand. That is just part of our overall "Quality at the Source" program at Pierce. To demonstrate the quality of our products and services, a list of at least fifteen (15) fire departments/municipalities that have purchased vehicles for a second time is provided. DELIVERY The apparatus will be delivered under its own power to insure proper break-in of all components while the apparatus is still under warranty. A qualified delivery representative shall deliver the apparatus and remain for a sufficient length of time to instruct personnel in proper operation, care and maintenance of the equipment delivered. 2 of 78 SPECIFICATIONS 8-17 MANUAL AND SERVICE INFORMATION At time of delivery, complete operation and maintenance manuals covering the apparatus will be provided. A permanent plate will be mounted in the driver's compartment specifying the quantity and type of fluids required including engine oil, engine coolant, transmission, pump transmission lubrication, pump primer and drive axle. SAFETY VIDEO At the time of delivery Pierce will also provide one (1) 39 -minute, professionally produced apparatus safety video, in DVD format. This video will address key safety considerations for personnel to follow when they are driving, operating, and maintaining the apparatus, including the following: vehicle pre -trip inspection, chassis operation, pump operation, aerial operation, and safety during maintenance. PERFORMANCE TESTS A road test will be conducted with the apparatus fully loaded and a continuous run of no less than ten (10) miles. During that time the apparatus will show no loss of power nor will it overheat. The transmission drive shaft or shafts and the axles will run quietly and be free of abnormal vibration or noise. The apparatus when fully loaded will not have less than 25 percent nor more than 50 percent on the front axle, and not less than 50 percent nor more than 75 percent on the rear axle. The apparatus will meet NFPA 1901 acceleration and braking requirements. SERVICE AND WARRANTY SUPPORT Pierce dealership support will be provided by South Coast Emergency Vehicle Service by operating a Pierce authorized service center. The service center will have factory -trained mechanics on staff versed in Pierce fire apparatus_ The service facility will be located within seventy five (75) miles of the fire department. In addition to the dealership, Pierce has service facilities located in both, Weyauwega, Wisconsin and Bradenton, Florida. Pierce also maintains a dedicated parts facility of over 100,000 square feet in Appleton, Wisconsin. The parts facility stocks in excess of $5,000,000 in parts dedicated to service and replacement parts. The parts facility employs a staff dedicated solely for the distribution and shipment of service and replacement parts. Service parts for the apparatus being proposed can be found via Pierceparts.com which, is an interactive online tool that delivers information regarding your specific apparatus as well as the opportunity to register for training classes. As a Pierce customer you have the ability to view the complete bill of materials for your specific apparatus, including assembly drawings, piece part drawings, and beneficial parts notations. You will also have the ability to search the complete Pierce item master through a parts search function which offers all Pierce SKU's and descriptions offered on all Pierce apparatus. 3 of 78 SPECIFICATIONS Published component catalogs, which include proprietary systems along with an extensive operators manual library is available for easy reference. Pierce Manufacturing maintains a dedicated service and warranty staff of over 35 personnel, dedicated to customer support, which also maintains a 24 hour 7 day a week toll free hot line, four (4) on staff EVTs, and offers hands-on repair and maintenance training classes multiple times a year. LIABILITY The successful bidder will defend any and all suits and assume all liability for the use of any patented process including any device or article forming a part of the apparatus or any appliance furnished under the contract. INSURANCE PROVIDED BY BIDDER COMMERCIAL GENERAL LIABILITY INSURANCE The successful bidder will, during the performance of the contract and for three (3) years following acceptance of the product, keep in force at least the following minimum limits of commercial general liability insurance: Each Occurrence$ 1,000,000 Products/Completed Operations Aggregate$ 1,000, 000 Personal and Advertising Injury$1,000,000 General Aggregate$2,000,000 Coverage will be written on a Commercial General Liability form. The policy will be written on an occurrence form and will include Contractual Liability coverage for bodily injury and property damage subject to the terms and conditions of the policy. The policy will include Owner as an additional insured when required by written contract. COMMERCIAL AUTOMOBILE LIABILITY INSURANCE The successful bidder will, during the performance of the contract, keep in force at least the following minimum limits of commercial automobile liability insurance and coverage will be written on a Commercial Automobile liability form: Each Accident Combined Single Limit:$ 1, 000,000 UMBRELLA/EXCESS LIABILITY INSURANCE The successful bidder will, during the performance of the contract and for three (3) years following acceptance of the product, keep in force at least the following minimum limits of umbrella liability insurance - 4 of 78 SPECIFICATIONS • Aggregate: $3,000,000 Each Occurrence:$3,000,000 The umbrella policy will be written on an occurrence basis and at a minimum provide excess to the bidder's General Liability and Automobile Liability policies. The required limits can be provided by one (1) or more policies provided all other insurance requirements are met. Coverage will be provided by a carrier(s) rated A- or better by A.M. Best. All policies will provide a 30 -day notice of cancellation to the named insured. The Certificate of Insurance will provide the following cancellation clause.. Should any of the above described polices be cancelled before the expiration date thereof, notice will be delivered in accordance with the policy provisions. Bidder agrees to furnish owner with a current Certificate of Insurance with the coverages listed above along with the bid. The certificate will show the purchaser as certificate holder. INSURANCE PROVIDED BY MANUFACTURER PRODUCT LIABILITY INSURANCE The manufacturer will, during the performance of the contract and for three (3) years following acceptance of the product, keep in force at least the following minimum limits of Product Liability insurance: Each Occurrence$ 1,000, 000 Products/Completed Operations Aggregate$ 1,000,000 Coverage will be written on a Commercial General Liability form. The policy will be written on an occurrence form. The manufacturer's policy will include the owner as additional insured when required by written contract between the Owner and a Pierce authorized dealer. UMBRELLA/EXCESS LIABILITY INSURANCE The manufacturer will, during the performance of the contract and for three (3) years following acceptance of the product, keep in force at least the following minimum limits of umbrella liability insurance: Each Occurrence -$25,000,000 Aggregate -$25,000,000 5 of 78 SPECIFICATIONS M The umbrella policy will be written on an occurrence basis and provide excess to the manufacturer's General Liability/Products policies. The required limits can be provided by one (1) or more policies provided all other insurance requirements are met. Coverage will be provided by a carrier(s) rated A- or better by A.M. Best. All policies will provide a 30 -day notice of cancellation to the named insured. The Certificate of Insurance will provide the following cancellation clause: Should any of the above described polices be cancelled before the expiration date thereof, notice will be delivered in accordance with the policy provisions. Manufacturer agrees to furnish owner with a current Certificate of Insurance with the coverages listed above along with the bid. The certificate will show the purchaser as the certificate holder. Your apparatus will be manufactured in Bradenton, Florida. NFPA 2016 STANDARDS This apparatus specification includes a commercial chassis that has not been certified to meet the requirements of NFPA 1901 by the chassis manufacturer. Although this chassis may comply with certain aspects of the standard, Pierce has not received certification from this chassis manufacturer that all criteria have been met. The body as built by the manufacturer must comply with the NFPA standards effective January of 2016. Certification of slip resistance of all stepping, standing and walking surfaces must be supplied with delivery of the apparatus. All horizontal surfaces designated as a standing or walking surface that are greater than 48.00" above the ground must be defined by a 1.00" wide line along its outside perimeter. Perimeter markings and designated access paths to destination points will be identified on the customer approval print and are shown as approximate. Actual location(s) will be determined based on materials used and actual conditions at final build. Access paths may pass through hose storage areas and opening or removal of covers or restraints may be required.Access paths may require the operation of devices and equipment such as the aerial device or ladder rack. A plate that is highly visible to the driver while seated will be provided. This plate will show the overall height, length, and gross vehicle weight rating. The manufacturer will have programs in place for training, proficiency testing and performance for any staff involved with certifications. An official of the company will designate, in writing, who is qualified to witness and certify test results. 6 of 78 SPECIFICATIONS 8-21 NFPA COMPLIANCY Apparatus proposed by the bidder will meet the applicable requirements of the National Fire Protection Association (NFPA) as stated in the current edition at time of contract execution. Fire Department's specifications that differ from NFPA specifications will be indicated in the proposal as "non-NFPA." PUMP TEST The rated water pump will be tested, approved, and certified by an ISO certified independent third party testing agency at the manufacturer's expense. The test results, along with the pump manufacturer's certification of hydrostatic test, the engine manufacturer's certified brake horsepower curve, and the manufacturer's record of pump construction details will be forwarded to the Fire Department. INSPECTION TRIP(S) The bidder will provide TWO (2) factory inspection trip(s) for eight customer representative(s). The inspection trip(s) will be scheduled at times mutually agreed upon between the manufacturer's representative and the customer. All costs such as travel, lodging and meals will be the responsibility of the bidder. BID BOND NOT REQUESTED A bid bond will not be included. If requested, the following will apply: All bidders will provide a bid bond as security for the bid in the form of a 5% bid bond to accompany their bid. This bid bond will be issued by a Surety Company who is listed on the U.S. Treasury Departments list of acceptable sureties as published in Department Circular 570. The bid bond will be issued by an authorized representative of the Surety Company and will be accompanied by a certified power of attorney dated on or before the date of bid. The bid bond will include language, which assures that the bidder/principal will give a bond or bonds as may be specified in the bidding or contract documents, with good and sufficient surety for the faithful performance of the contract, including the Basic One (1) Year Limited Warranty, and for the prompt payment of labor and material furnished in the prosecution of the contract. Notwithstanding any document or assertion to the contrary, any surety bond related to the sale of a vehicle will apply only to the Basic One (1) Year Limited Warranty for such vehicle. Any surety bond related to the sale of a vehicle will not apply to any other warranties that are included within this bid (OEM or otherwise) or to the warranties (if any) of any third party of any part, component, attachment or accessory that is incorporated into or attached to the vehicle. In the event of any contradiction or inconsistency between this provision and any other document or assertion, this provision will prevail. 7 of 78 SPECIFICATIONS 8-22 PERFORMANCE BOND NOT REQUESTED A performance bond will not be included. If requested at a later date, one will be provided to you for an additional cost and the following will apply: The successful bidder will furnish a Performance and Payment bond (Bond) equal to 100 percent of the total contract amount within 30 days of the notice of award. Such Bond will be in a form acceptable to the Owner and issued by a surety company included within the Department of Treasury's Listing of Approved Sureties (Department Circular 570) with a minimum A.M. Best Financial Strength Rating of A and Size Category of XV. In the event of a bond issued by a surety of a lesser Size Category, a minimum Financial Strength rating of A+ is required. Bidder and Bidder's surety agree that the Bond issued hereunder, whether expressly stated or not, also includes the surety's guarantee of the vehicle manufacturer's Bumper to Bumper warranty period included within this proposal. Owner agrees that the penal amount of this bond will be simultaneously amended to 25 percent of the total contract amount upon satisfactory acceptance and delivery of the vehicle(s) included herein. Notwithstanding anything contained within this contract to the contrary, the surety's liability for any warranties of any type will not exceed three (3) years from the date of such satisfactory acceptance and delivery, or the actual Bumper to Bumper warranty period, whichever is shorter. APPROVAL DRAWING A drawing of the proposed apparatus will be prepared and provided to the purchaser for approval before construction begins. The Pierce sales representative will also be provided with a copy of the same drawing. The finalized and approved drawing will become part of the contract documents. This drawing will indicate the chassis make and model, location of the lights, siren, horns, compartments, major components, etc. A "revised" approval drawing of the apparatus will be prepared and submitted by Pierce to the purchaser showing any changes made to the approval drawing. ELECTRICAL WIRING DIAGRAMS Two (2) electrical wiring diagrams, prepared for the body as it interfaces with the commercial chassis, will be provided. 8 of 78 SPECIFICATIONS 8-23 CHASSIS The chassis will be a Freightliner, Model M2-106MD all wheel drive conventional chassis, supplied with the following equipment: WHEELBASE The wheelbase of the vehicle will be 185". GVW RATING The gross vehicle weight rating will be 35,000 lbs.. FRAME The frame rails will be formed from 120,000 psi yield, heat treated alloy steel. The frame rails will be E -coated prior to painting. FRAME LINER An 0.25" inner frame reinforcement will be provided. The frame section properties will be: - Section Modulus:26.80 cubic inch, per rail - RBM:3,217,000 in -Ib, per rail - Yield Strength: 120,000 psi, per rail FRONT AXLE Front axle will be a driving axle, with a ground rating capacity of 12,000 Ib. The transfer case to drive the front axle will be a 2 -speed transfer case. Synthetic lubricant will be provided. FRONT SUSPENSION Spring mounted: Taper -leaf Capacity at Ground: 12,000 Ib Shock absorbers will be provided on the front axle. FRONT BRAKES The front brakes will be S -Cam, 16.50" x 5.00". The front brakes will be provided with automatic slack adjusters. TIRE BRAND The default brand of tire for the commercial chassis manufacturer for this apparatus is Michelin. 9 of 78 SPECIFICATIONS However, the commercial chassis manufacturer reserves the right to substitute brands and models of tire as may be available at the factory on the date of manufacture. They will provide the proper tread style and weight rating for the position in which the tire is installed. Pierce Manufacturing and the chassis manufacturer are working to provide the brand of tire specified. However, due to shortages (and even model changes by the tire manufacturers), if the chassis manufacturer substitutes other tires, they will not be changed by Pierce. TIRES, FRONT Front tires will be 22.50, radial tires with a traction tread pattern suitable for the steering axle position on a front driving axle. The capacity of the tires will meet or exceed the rating of the axle and/or suspension. WHEELS, FRONT Wheels for the front axle will be 22.50" aluminum disc, properly sized for the provided tires. REAR AXLE The single reduction rear axle will have a ground rating capacity of 23,000 Ib. The brake chambers will be forward mounted PARKING BRAKE The parking brake will be spring set and located on the rear axle service brake Rear axle brakes will be 16.50" x 7.00", S -Cam drum type brakes. Automatic slack adjusters will be provided. REAR AXLE RATIO NFPA 1901, 2016 edition, section 4.15.2 requires that the maximum top speed of fire apparatus with a GVWR over 26,000 Ib will not exceed either 68 mph or the manufacturer's maximum fire service speed rating for the tires installed on the apparatus, whichever is lower. NFPA 1901, 2016 edition, section 4.15.3 requires that if the combined water tank and foam agent tank on the fire apparatus exceed 1250 gallons or the GVWR of the vehicle is over 50,000 Ib, the maximum top speed of the apparatus will not exceed either 60 mph or the manufacturer's maximum fire service speed rating for the tires installed on the apparatus, whichever is lower. It is the intention of the standard to improve safety by limiting the speed of all apparatus to 68 mph, and tankers or heavy apparatus to 60 mph. By requesting an exception to this requirement, the purchasing authority is consciously choosing to operate their apparatus at speeds above the limits designated as safe speeds by the NFPA Technical Committee on Fire Department Apparatus. 10 of 78 SPECIFICATIONS 8-25 The top speed of the apparatus as manufactured exceeds the NFPA requirements. Per fire department specification of a top speed that exceeds NFPA requirements, the apparatus will be non-compliant to NFPA 1901 standards at time of contract execution. A rear axle ratio will be furnished to allow the vehicle to reach an approximate top speed of 67 to 70 MPH. REAR SUSPENSION The rear suspension will be spring mounted multi -leaf, with a capacity at ground level of 23,000 lbs. DUST SHIELDS The front and rear brakes will be provided with dust shields. TIRES, REAR, 4X4 Rear tires will be 22.50, radial tires with a traction tread pattern suitable for the rear axle position on an all -wheel -drive vehicle. The tire capacity will meet or exceed the capacity of the axle and/or suspension. Due to ratio matching requirements of an all -wheel -drive vehicle, the front and rear tire sizes will be the same. The size of the tires provided will be at least the minimum size required to meet the GAWR rating of both axles. WHEELS, REAR The rear wheels will be aluminum 22.50" disc, properly sized for the tires provided. TIRE PRESSURE MANAGEMENT There will be a RealWheels LED AirSecureTM tire alert pressure management system provided, that will monitor each tire's pressure. A sensor will be provided on the valve stem of each tire for a total of six (6) tires. The sensor will calibrate to the tire pressure when installed on the valve stem for pressures between 10 and 200 psi. The sensor will activate an integral battery operated LED when the pressure of that tire drops 5 to 8 psi. Removing the cap from the sensor will indicate the functionality of the sensor and battery. If the sensor and battery are in working condition, the LED will immediately start to flash. HUB COVERS (FRONT) Stainless steel hub covers will be provided on the front axle. REAR HUB COVERS A pair of stainless steel high hat hub covers will be provided on rear axle hubs. 11 of 78 SPECIFICATIONS um CHROME LUG NUT COVERS Chrome lug nut covers will be supplied on front and rear wheels MUD FLAPS Mud flaps with a Pierce logo will be installed behind the front and rear wheels. WHEEL CHOCKS There will be one (1) pair of Worden Safety Products, Model HWC7Y-WH, wheel chocks provided. These wheel chocks are a large heavy duty extruded aluminum chock with a solid bottom, has a powder coated safety yellow finish and a welded aluminum handle. WHEEL CHOCK BRACKETS There shall be one (1) pair of Worden Safety model U815T mounting wheel chock brackets provided . The brackets shall be mounted one on the passenger side running board just in front of the bolt on compartment and one on the driver's side running board towards the front body bulkhead both with strap to hold in place. Match locations and mounting as done on 29679TR 01 and 02 is pic. ANTI-LOCK BRAKE SYSTEM The vehicle will be equipped with an anti-lock braking system. The ABS will provide anti-lock braking control on both the front and rear wheels. It will be a digitally controlled system that utilizes microprocessor technology to control the anti-lock braking system. Each wheel will be monitored by the system. When any particular wheel begins to lockup, a signal will be sent to the control unit. This control unit then will reduce the braking of that wheel for a fraction of a second and then reapply the brake. This anti-lock brake system will eliminate the lockup of any wheel thus helping to prevent the apparatus from skidding out of control. The system will include Automatic Traction Control (ATC). The system will include Electronic Stability Control (ESC). When instability is detected, the ESC system will automatically apply brakes to individual wheels (with no intervention from the driver) and may also reduce engine torque to help keep the vehicle on track. AIR COMPRESSOR, BRAKE SYSTEM The air compressor will have an output of 18.7 cubic feet per minute. AIR DRYER An air dryer with a heater will be provided. Other features of this air dryer include: Desiccant style filter In-line filtration system 12 of 78 SPECIFICATIONS 8-27 - Automatic purge valve AIR INLET/OUTLET Two (2) air inlets/outlets will be installed with the female coupling located in the driver side lower step well of cab. This system will tie into the "wet" tank of the brake system and include a check valve in the inlet line and an 85 psi pressure protection valve in the outlet line. The air outlet will be controlled by a needle valve. A mating male fitting will be provided with the loose equipment. The air inlet will allow a shoreline air hose to be connected to the vehicle. This will allow station air to be supplied to the brake system of the vehicle to insure constant air pressure. AIR INLET FITTING The fitting used for the air inlet will be a Amflo CP -20 brass fitting. ADDITIONAL AIR TANK An additional air tank with 1,454 cubic inch displacement will be provided to increase the capacity of the air system. This tank will be dedicated for air horn use. The air tank will be primed and painted to meet a minimum 750 hour salt spray test. To reduce the effects of corrosion, the air tank will be mounted with stainless steel brackets. The output flow of the engine air compressor varies with engine rpm. Full compressor output is only achieved at governed engine speed. Engine speed may be limited by generators, pumps and other PTO driven options. LABEL, AIR TANKS There will be a stick -on style label provided on all of the chassis air tanks to identify the function a particular tank provided to the chassis (i.e. quick build up, isolated, chassis air supply, etc.). ENGINE • Model: Electronic Cummins L9 • Number of Cylinders: Six (6) • Bore and Stroke: 4.49" x 5.69" • Displacement: 543 cubic inches (8.9 Liter) • Rated Brake Horsepower: 350 at 2000 rpm • Peak Torque: 1000 at 1400 rpm • Governed rpm: 2200 • Turbocharger • Charge Air Cooled • Fuel System: Hydraulically Actuated, Electronically Controlled Unit Injectors (HEUI) 13 of 78 SPECIFICATIONS ENGINE ACCESSORIES • Air Cleaner: Dry type, with restriction indicator in cab • Fuel Filters: Dual, with check valve • Governor: Limiting speed type • Lube Oil Cooler • Lube Oil Filter: Full flow • Starting Motor: 12 -volt • Oil Fill and Level Gauge RADIATOR • Pressurized System, Tube and Fin • Deaeration Tank and Sight Glass • Anti -Freeze Protection -30 Degrees Fahrenheit HIGH IDLE A high idle switch will be provided on the instrument panel inside the cab. Activating the switch will cause the vehicle to automatically maintain a preset engine rpm. The high idle switch will be operational only when the parking brake is on and the truck transmission is in neutral. A green indicator light will be provided adjacent to the switch. The light will be labeled "OK To Engage High Idle." ENGINE EXHAUST BRAKE An exhaust brake with an integral variable geometry turbo charger (VGT) will be provided. The control will be located on the instrument panel within easy reach of the driver. AIR INTAKE. W/EMBER SEPARATOR The air inlet will be equipped with a stainless steel mesh to separate water and burning embers from the air intake system such that particulate matter larger than 0.039" (1.0 mm) in diameter cannot reach the air filter element. This will comply with NFPA 1901 and 1906 standards. EXHAUST SYSTEM The exhaust system will include a diesel particulate filter (DPF) and a selective catalytic reduction (SCR) device to meet current EPA standards. The DPF and SCR will be mounted horizontally outside of the frame rails in the right side front step area. EXHAUST MODIFICATIONS The exhaust shall continue underneath the passenger's side of the body with a horizontal tailpipe and diffuser to the rear of the rear wheels and shall terminate toward the rear side of the body just behind the rear wheels. A heat deflector shield shall be provided where the tail pipe is routed under any side compartmentation. 14 of 78 SPECIFICATIONS • EXHAUST MODIFICATION The exhaust pipe will be brought out from under the body at a 35 degree angle to the rear. The diffuser will be reduced to approx. 5.00" in the center to accommodate the fire department's air recovery system. There will be a minimum of 2.50" from the exhaust pipe to the under side of the body heat shield. The last 7.00" of the exhaust will be free of hangers and/or clamps. Exhaust heat shield shall be supported with a second muffler clamp to support the heat shield. COOLANT LINES Gates Blue Stripe rubber hose will be used for all engine coolant lines installed by the chassis manufacturer. Hose clamps will be the constant torque type to prevent coolant leakage. They will expand and contract according to coolant system temperature thereby keeping a constant clamping pressure on the hose. FIIFI TANK A 70 gallon fuel tank will be provided and mounted at the left-hand cab step. The tank will be constructed of aluminum. DIESEL EXHAUST FLUID TANK A diesel exhaust fluid (DEF) tank will be provided and mounted on the left side, below the cab The tank will be sized by the chassis manufacturer based on the engine provided. It will include an integrated heater unit that utilizes engine coolant to thaw the DEF in the event of freezing. FUEL PRIMER PUMP A fuel primer pump will be included with the heated fuel water separator. AUXILIARY FUEL COOLING SYSTEM A supplementary fuel cooling system will be provided to allow the use of water from the discharge side of the pump for cooling the chassis engine fuel. The heat exchanger will be a cylindrical type and will be a separate unit. The cooler will operate any time the pump is discharging water and will be plumbed to the master drain valve. TRANSMISSION An Allison, model 3000 EVS, electronic torque converting automatic transmission will be provided. To qualify for the EVS rating, the transmission will be filled with synthetic transmission fluid. Two (2) PTO openings will be located on left and right side of the converter housing (positions 8 o'clock and 4 o'clock). 15 of 78 SPECIFICATIONS Riffol A transmission temperature gauge or warning light will be installed on cab instrument panel TRANSMISSION SHIFT CONTROL A push button shift module will be mounted to right of driver. Shift position indicator will be indirectly lit for after dark operation. The transmission will be a five (5) -speed. TRANSMISSION COOLER A transmission oil cooler will be provided in a tank of the radiator. DRIVELINE Drivelines will have a heavy duty metal tube that is properly sized for the intended application. The shafts will have a splined slip joint. DRIVELINE SAFETY LOOP(S) There will be two (2) driveline safety loop(s) provided to help retain the drive shaft in the event of a drive shaft or cardan joint failure. STEERING The steering system will be hydraulically driven. The steering column will have an adjustable tilt and telescope feature. COVER, WINCH RECEIVER The winch receiver tube and supports visible below the front bumper will be covered with aluminum treadplate. GUARD AIR HOSE WITH FIRE RESISTANT WRAP Guards shall be provided at the drivers front corner of the cab to provide an enclosure for the air hoses goining from the junction block to the cab. The Synflex hose will be wrapped with fire resistant loom from the mnifold block to where it enters the cab. FRONT WINCH A Warn Series 15, 15,000 pound electric winch will nest below the top aluminum treadplate surface of the front bumper. A 28.00" x 10.00" door for maintenance and access to the winch direction control lever and remote control plug will be provided. The cover will be provided with a mechanical stay arm hold -open device. Winch will be mounted on a surface that will not flex when the winch is in use, since it could bind working parts of the winch. Winch will be braced by a three (3) point mount, as recommended by the winch manufacturer. The winch will include 90 feet of .437" galvanneal wire rope, with hook prespooled on the drum. 16 of 78 SPECIFICATIONS 8-31 The hook will be removed at Pierce and the fire department will install their own hook at the fire department Winch will have planetary gearing. Electric motor will have a thermal overload protection switch. Wire cables to battery will be two (2) -gauge or larger. Speed and amperage draw of winch will be variable depending on winch load. Winch will have a minimum of a 30' remote control cable. A chrome four (4) -way roller fairlead will be supplied of sufficient strength to accommodate the winch capacity. A label will be placed on or near the mount that states the maximum winch load rating and the maximum rope load rating that the mount can support. The .437" wire rope does not meet the NFPA 2x factor of safety therefore, NFPA guidelines will be waived by the fire department to use .437"x 90 wire rope giving a factor of safety of 1.5. BUMPER A one (1) -piece, 10.00" high, stainless steel bumper will be attached to the front of the frame. A 9.00" channel will be mounted directly behind the bumper for additional strength. The bumper will be extended 19.00" from the front face of the cab. GRAVEL PAN A gravel pan, constructed of bright aluminum treadplate, will be furnished between the bumper and cab face. The gravel pan will be properly supported from the underside to prevent flexing and vibration of the aluminum treadplate. TOW EYES Two (2) chrome tow eyes will be mounted through the front face of the bumper. The inner and outer edges of the tow eyes will have a .25" radius. Tow eyes will be mounted directly to the bumper frame. Cutouts will be provided in the front face of stainless steel bumper to allow tow eyes to extend out the front. The tow eyes will be designed and positioned to allow up to a 9,000 Ib straight horizontal pull in line with the centerline of the vehicle. The tow eyes will not be used for lifting of the apparatus. TOOLBOX The front bumper extension will have an aluminum tool/chain box installed on the right side. 17 of 78 SPECIFICATIONS 8-32 TOOL BOX COVER A bright aluminum treadplate cover will be provided. The cover will be attached with a stainless steel hinge. A SouthCo, raised trigger, chrome finish, model C2-32-11-3 latch will secure the cover in the closed position and a mechanical stay arm will hold the cover in the open position. PROTECTION BRACKET ON BOTTOM EDGE OF 20" CONTIUUM LIGHTS Fabricated protection brackets will be provided around the two (2) 20" Continuum lights mounted under the front bumper.Brackets will be .25" x 2" steel flat bar and painted to match body color.Flat bar brackets will be bolted to bottom edge of the bumper, one (1) each light. LICENSE PLATE BRACKET A non -illuminated license plate bracket will be mounted on the front bumper. The bracket will be formed from bright stainless steel. PORTABLE WINCH RECEIVER A portable winch receiver will be installed at the front bumper extension of the apparatus. The winch receiver will be constructed of heavy steel tubing and reinforced to the bumper extension framework for the receiving portion. The winch receiver will be a class IV receiver. Winch power will be provided at location. HOSE TRAY COVER A bright aluminum treadplate cover will be provided over the one (1) hose tray. The cover will be attached with a stainless steel hinge and located left side hose tray in the front bumper. A SouthCo raised trigger, chrome, model C2-32-11-3 latch will secure the cover in the closed position and a mechanical stay arm will hold the cover in the open position. HOSE TRAY (LEFT SIDE) A hose tray will be placed in the left side of the extended bumper. The tray will have a capacity of 100' of single jacketed 1.75" hose. Black rubber grating will be provided at the bottom of the tray. Drain holes will also be provided. CAB A 4 -door, high -roof cab will be provided. The cab and doors will be of an aluminum construction. 18 of 78 SPECIFICATIONS 8-33 Exterior Styling Aerodynamic hood and windshield Tinted Glass in all Windows Fiberglass hood with mounted plastic grille Single 63"x14" rear window (unless deleted by the customer - option elsewhere in proposal) Interior Air bag rear cab suspension Gray vinyl mats Forward roof mounted console Two (2) dash -mounted cup holders, right-hand and left-hand Gray Vinyl Upholstery Dual Sun visors Fresh Air Heater and Defroster - Gray Vinyl Upholstery CAB GRILLE - CHROMED The cab grille will be a chromed high impact plastic with a horizontal rib design. The headlight bezels and air intake grilles will also have a chromed finish. The grille will tilt with the hood. MIRRORS West Coast style heated, remote operated mirrors constructed from a molded composite material with a bright finish will be provided. A heated 8.00" convex mirror will be included below the primary mirrors. An auxiliary down view mirror will be included on the passenger side. CAB ACCESS STEPS The cab access steps will be provided by the apparatus manufacturer. The steps will be a two (2) step design fabricated from bright aluminum treadplate. The step assembly will enclose the area under the cab including the fuel and DEF tanks. The steps will be a non -continuous "split -style" fashion that allows for a tool compartment option to be selected under the crew cab area, . The fuel tank fill and DEF cap will be exposed for refueling if located under the cab. 19 of 78 SPECIFICATIONS Elm COMPARTMENT, STORAGE A double -door storage compartment will be provided below the right side crew cab door. Both doors will be double pan construction with a D -ring latch and vertical hinges. The exterior of this compartment will serve as an entrance step to the crew cab. The lower step will utilize edge punched aluminum material and will meet all NFPA step height requirements.The lower step will be the same height as the air tank cover step.All lower steps to be the same height. COMPARTMENT, STORAGE A storage compartment will be provided below the left side crew cab door.The door will be double pan construction with a D -ring latch and a vertical hinge. The exterior of this compartment will serve as an entrance step to the crew cab. The lower step will utilize edge punched aluminum material and will meet all NFPA step height requirements. The lower step will be at the same height as the step on the fuel tank.All steps will be at the same height as the fuel tank. STEP LIGHTS There will be eight (8) white LED step lights provided. There will be two (2) lights installed at each cab and crew cab door, one (1) light per doorstep. In order to ensure exceptional illumination, each light will provide a minimum of 25 foot-candles (fc) covering an entire 15" x 15" square placed ten (10) inches below the light and a minimum of 1.5 fc covering an entire 30" x 30" square at the same ten (10) inch distance below the light. The lights will be activated when the adjacent door is opened. HANDRAILS Replace the standard Freightliner cab and crew cab handrails with new Pierce handrails. Pierce extruded aluminum handrails will be provided at each cab and crew cab entrance. Total of four handrails. WINDOW, BLANK PANEL The back wall rear cab window will be removed and replaced with an aluminum panel. The interior side will be painted a color similar to the cab interior color. The exterior side will be painted to match surrounding exterior job color. 20 of 78 SPECIFICATIONS 8-35 SLOPE AND GRADE INDICTORS Located in view of the driver will be two (2) level indicators, one will be for side slope and the other for grade.The degrees will be NFPA compliant for NFPA 1906.The indicators will show red in areas beyond the 1906 range. INTERIOR CAB SEAT KICK PLATES Am aluminum treadplate kick plate will be provide behind the driver and officer's seat near the floor to protect the wires and air lines behind the seats from damage from the crew area feet.See pictures in folder. DAYTIME RUNNING LIGHTS The chassis will be provided with daytime running lights. AIR CONDITIONING An air conditioner will be provided that is integral with heater and defroster system. AIR CONDITIONING EMBER FILTER An ember filter will be provided by the apparatus manufacturer to keep embers out of the HVAC filter element. The air inlet will be equipped with a stainless steel mesh to separate water and burning embers from the HVAC air intake system such that particulate matter larger than 0.039" (1.0 mm) in diameter cannot reach the air filter element. This will comply with NFPA 1901 and 1906 standards. WINDOW DEFROST FANS Two (2) window defrost fans will be mounted on the ceiling of the cab, located located on the rear wall one each side of the cab. ENGINE COMPARTMENT LIGHT There will be two (2) Whelen Model 3SCOCDCR, 12 volt DC, 3.00" white LED light(s) with Model 3FLANGEC chrome flange kit(s) installed under the cab to be used as engine compartment lights. These light(s) will be controlled by a switch located under the engine hood STORAGE CONSOLE There will be a console located between the front seats with room for map storage, the siren head and a radio. There will be four (4) sections for map storage to the rear of the console. Each map storage section will be approximately 4.00" wide x 13.00" long x 12.25" deep. The console will be constructed of smooth aluminum and painted black. SEATING CAPACITY The seating capacity in the cab will be four (4). 21 of 78 SPECIFICATIONS SEATING Seating inside the cab will consist of a Seats Inc. 911 air -ride driver seat and a Seats Inc. 911 air -ride officer seat. SEATING (CREW CAB) Two (2) individual Bostrom Sierra non-SCBA style seats will be provided inside the crew cab - one in each outboard position. They will be air -suspension seats with adjustable recline and fixed lumbar feature. Seats will have the NFPA seat sensors. SEAT BELT WEB LENGTH NFPA 14.1.3.2 and 14.1.3.3 requires effective seat belt web length for a Type 1 lap belt for pelvic restraint to be a minimum of 60 in., and a Type 2 pelvic and upper torso restraint -style seat belt assembly to be a minimum of 110 in. Per Fire Department specification of a commercial chassis, this apparatus will have seat belts of the required length. These belts will provide sufficient length for large firefighters in bunker gear. This apparatus will be compliant to NFPA standards effective at time of contract execution. SEAT BELTS All seating positions in the cab and crew cab will have highly visible (orange) seat belts. HELMET STORAGE PROVIDED BY FIRE DEPARTMENT NFPA 1901, 2016 edition, section 14.1.7.4.1 requires a location for helmet storage be provided. There is no helmet storage on the apparatus as manufactured. The fire department will provide a location for storage of helmets. ADDITIONAL DOME LIGHTING There will be four (4) Whelen, Model 60C*EGCS, 6.00" round dual LED dome lights installed in the cab and/or crew cab located two front two in the crewcab. The color of the LED's will be red and white. The white LED's will be controlled by the lens switch. The color LED's will be controlled by the door switches. The light(s) may be load managed when the parking brake is applied. MAP LIGHT There will be one (1) Sunnex@, HS76*-00, halogen map light(s) with swivel joint base provided in the cab and located over officer's inner shoulder. Each map light will have a square base with an on/off switch. 22 of 78 SPECIFICATIONS 8-37 The light(s) will also be provided with no additional accessory. The light switch(es) will be connected directly to the battery switched power. HAND HELD SPOTLIGHT There will be four (4) Pelican Products, Model 9410L LED, 12v DC rechargeable lights mounted two in the rear cab and two in the body. The color will be yellow. Each charger will be hard wired to the 12 VDC system. CAB INSTRUMENTS - Engine Temperature Gauge and Warning Buzzer - Engine Oil Pressure Gauge and Warning Buzzer - Speedometer with Odometer - Engine Tachometer - Engine Hourmeter - Fuel Level Gauge - DEF Level Gauge and Warning Lamp - Voltmeter: Low voltage red warning light and audible alarm - Air Brake Pressure Gauge - Air Restriction Indicator Circuit Breakers: For overload protection of electric circuits Ignition Switch: Keyless type EMERGENCY SWITCH PANEL An emergency switch panel will be provided in the cab. The switch panel will be located overhead and on the cab instrument panel. "DO NOT MOVE APPARATUS" INDICATOR A flashing red indicator light (located in the driving compartment) will be illuminated automatically per the current edition of NFPA. The light will be labeled "Do Not Move Apparatus If Light Is On". 23 of 78 SPECIFICATIONS KIM The same circuit that activates the Do Not Move Apparatus indicator will activate a pulsating alarm when the parking brake is released. OPEN DOOR INDICATOR LIGHT A red "open door" indicator light will be provided inside the cab, in clear view of the driver, to warn of an open compartment door. WIPER CONTROL Wiper control will include an intermittent feature and windshield washer controls. SPARE CIRCUIT There will be eight (8) pair of wires, including a positive and a negative, installed on the apparatus. The above wires will have the following features: • The positive wire will be connected directly to the battery switched power. • The negative wire will be connected to ground. • Wires will be protected to 10 amps at 12 volts DC. • Power and ground will terminate two on the DS, two on the PS front of console, two each side of the rear console for the rear seating positions. • Termination will be with 15 amp, power point plug with rubber cover. Wires will be sized to 125% of the protection. This circuit(s) may be load managed when the parking brake is applied. RADIO An electronic digitally tuning AM/FM stereo radio with weather band will be provided. It will also include a CD and auxiliary inputs, IPOD compatibility, J1939 connectivity, two (2) coaxial speakers and a clock. VEHICLE DATA RECORDER There will be a vehicle data recorder (VDR) capable of reading and storing vehicle information provided. The information stored on the VDR can be downloaded through a USB port mounted in a convenient location determined by cab model. A USB cable can be used to connect the VDR to a laptop to retrieve required information. The program to download the information from the VDR will be available to download on-line. The vehicle data recorder will be capable of recording the following data via hardwired and/or CAN inputs: • Vehicle Speed - MPH 24 of 78 SPECIFICATIONS • • Acceleration - MPH/sec • Deceleration - MPH/sec • Engine Speed - RPM • Engine Throttle Position - % of Full Throttle • ABS Event - On/Off • Seat Occupied Status - Yes/No by Position • Seat Belt Buckled Status - Yes/No by Position • Master Optical Warning Device Switch - On/Off • Time - 24 Hour Time • Date - Year/Month/Day The system will also be capable of no additional functionality required. An additional input will be included with this system. When the VDR is active, this input will not be required. Seat Belt Monitoring System A seat belt monitoring system (SBMS) will be provided. The SBMS will be capable of monitoring up to six (6) seating positions indicating the status of each seat position per the following: • Seat Occupied & Buckled = Green LED indicator illuminated • Seat Occupied & Unbuckled = Red LED indicator with audible alarm • No Occupant & Buckled = Red LED indicator with audible alarm • No Occupant & Unbuckled = No indicator and no alarm The SBMS will include an audible alarm that will warn that an unbuckled occupant condition exists and the parking brake is released, or the transmission is not in park. INTERCOM SYSTEM A four (4) position intercom system with dual radio interface capability at the driver and officer positions and remote push to transmit buttons located on the console each side will be provided. Two (2) crew cab positions, located at both forward facing seats, will have radio listen / intercom only. The following David Clark components will be supplied with this system: • Two (2) U3816 Dual Radio Interface Modules (Driver, Officer) • Four (4) Remote Transmit button kits • One (1) U3800 Intercom Unit (1 Crew) • One (1) C3820 Power Cable. • One (1) U3801 Intercom Unit (1 Crew) 25 of 78 SPECIFICATIONS DO -0 • All necessary cables and connectors RADIO / INTERCOM INTERFACE INCLUDED All radio interfaced stations will have universal radio interfaces installed. The interface wiring will be routed within the cab to radio control in the console . UNDER THE HELMET HEADSET There will be four (4) under the helmet, headset(s) provided seating positions. Each David Clark, Model H3442, headset will feature: • 5' Coiled cord • Noise cancelling electric microphone • Flexible microphone boom rotates 200 degrees for left or right dress • Microphone on/off button • Comfort Gel Earseals • 23 dB noise reduction HEADSET HANGERS There will be four (4) headset hanger(s) installed driver's seat, officer's seat, driver's side outboard forward facing seat and passenger's side outboard rear facing seat. The hanger(s) will meet NFPA 1901, Section 14.1.11, requirement for equipment mounting. GPS / MULTIMODE ANTENNA INSTALLATION There will be one (1) customer supplied GPS / Multimode antenna(s) with stud mount for thick roof material to be installed on the roof. The antenna coax cable(s) will be run per the packing list / instructions provided to the third party installer. Specific shipping requirements will be followed. The GPS / Multimode antenna will be sent to the apparatus manufacturers preferred installer prior to cab fabrication. RADIO ANTENNA MOUNT There will be four (4) standard 1.125", 18 thread antenna -mounting base(s) installed on the cab roof with high efficiency, low loss, coaxial cable(s) routed to the console. A weatherproof cap will be installed on the mount. VIDEO SYSTEM. REAR CAMERA & 7" LCD DISPLAY A Zone Defense 323-1-4 video system with wide angle color rear view video camera and 7" color LCD display monitor with swivel mount will be provided. The weatherproof, IP67 rated, camera will feature a built in microphone and 18 infrared emitters for 0 lux operation. The camera will be activated with the reverse signal or manually from the monitor. 26 of 78 SPECIFICATIONS E Images will be displayed in the cab on a 7" color LCD flat panel display with integral camera switcher and integrated speaker permitting audio from the active camera and located in view of the driver on the engine tunnel ELECTRICAL All 12 -volt electrical equipment installed by the apparatus manufacturer will conform to modern automotive practices. All wiring will be high temperature crosslink type. Wiring will be run in loom or conduit where exposed and have grommets where wire passes through sheet metal. Automatic reset circuit breakers will be provided which conform to SAE Standards. Wiring will be color, function and number coded. Function and number codes will be continuously imprinted on all wiring harness conductors at 2.00" intervals. Exterior exposed wire connectors will be positive locking, and environmentally sealed to withstand elements such as temperature extremes, moisture and automotive fluids. Electrical wiring and equipment will be installed utilizing the following guidelines: (1) All holes made in the roof will be caulked with silicon. Rope caulk is not acceptable. Large fender washers, liberally caulked, will be used when fastening equipment to the underside of the cab roof. (2) Any electrical component that is installed in an exposed area will be mounted in a manner that will not allow moisture to accumulate in it. Exposed area will be defined as any location outside of the cab or body. (3) Electrical components designed to be removed for maintenance will not be fastened with nuts and bolts. Metal screws will be used in mounting these devices. Also a coil of wire will be provided behind the appliance to allow them to be pulled away from mounting area for inspection and service work. (4) Corrosion preventative compound will be applied to all terminal plugs located outside of the cab or body. All non -waterproof connections will require this compound in the plug to prevent corrosion and for easy separation (of the plug). (5) All lights that have their sockets in a weather exposed area will have corrosion preventative compound added to the socket terminal area. (6) All electrical terminals in exposed areas will have silicon (1890) applied completely over the metal portion of the terminal. All emergency light switches will be mounted on a separate panel installed in the cab. A master warning light switch and individual switches to be provided to allow pre -selection of emergency lights. The light switches will be "rocker" type with an internal indicator light to show when switch is energized. All switches will be properly identified and mounted in a removable panel for ease in servicing. Identification of the switches will be done by either printing or etching on the switch panel. The switches and identification will be illuminated. 27 of 78 SPECIFICATIONS All lights and reflectors, required to comply with Federal Motor Vehicle Safety Standard #108, will be furnished. Rear identification lights will be recessed mounted for protection. Lights and wiring mounted in the rear bulkheads will be protected from damage by installing a false bulkhead inside the rear compartments. An operational test will be conducted to ensure that any equipment that is permanently attached to the electrical system is properly connected and in working order. The results of the tests will be recorded and provided to the purchaser at time of delivery. BATTERY SYSTEM A single starting battery system will be provided consisting of three (3)-12 volt, maintenance - free batteries. The battery system will have a total of 2250 cold cranking amps. Jump Start Connections Positive and negative posts for jump starting will be provided by the chassis manufacturer. They will be frame mounted and located under the hood. BATTERY SYSTEM MODIFICATION Due to specific apparatus configuration requirements, the batteries will be relocated to the driver's side crew cab step by the Pierce. An enclosure with an access panel shall protect the batteries. MASTER BATTERY SWITCH A master battery switch, to activate the battery system, will be provided inside the cab within easy reach of the driver. The master battery disconnect switch will be wired between the starter solenoid and the remainder of the electrical loads on the apparatus. A green "battery on" indicator light, visible from the driver's position, will be provided. BATTERY CHARGER There will be a KussmaulTM 1200, Model 091 -187 -12 -Remote, battery charger provided. A bar graph display indicating the state of charge will be provided. The charger will have a maximum output of 40 amps and a fully automatic regulation. The battery charger will be wired to the AC shoreline inlet through an AC receptacle adjacent to the battery charger. The battery charger will be located in the left body compartment mounted on the left wall as high as possible. 28 of 78 SPECIFICATIONS ,,. The battery charger indicator will be located adjacent to the driver's seat riser. The indicator will be enclosed to protect it from damage. AUTO EJECT FOR SHORELINE There will be one (1) KussmaulTM, Model 091-55-20-120, 20 amp 120 volt AC shoreline inlet(s) provided to operate the dedicated 120 volt AC circuits on the apparatus. The shoreline inlet(s) will include red weatherproof flip up cover(s). There will be a release solenoid wired to the vehicle's starter to eject the AC connector when the engine is starting. The shoreline(s) will be connected to the battery charger. There will be a mating connector body supplied with the loose equipment. There will be a label installed near the inlet(s) that state the following: • Line Voltage • Current Ratting (amps) • Phase • Frequency The shoreline receptacle will be located on the driver's side cab step area. ALTERNATOR The alternator will be a Delco with a capacity of 12 -volt 300 amp. ELECTRONIC LOAD MANAGEMENT A Class 1, Total System Manager will be provided that monitors the vehicles 12 -volt electrical system, and automatically reduces the electrical load in the event of a low voltage condition and by doing so, ensures the integrity of the electrical system. The system will have the following features- - Main battery monitoring - Isolated battery monitoring (if applicable) - Electrical load shedding - Emergency lights sequenced - Fast idle control - Reverse polarity / Short circuit protection 29 of 78 SPECIFICATIONS - Sixteen available outputs - Priorities can be set for individual outputs - Dedicated output for high idle output function - Low Voltage Alarm Output (NFPA 1901) - Variable user selectable output. Selectable 10.5 to 15 VDC - Master switch and park brake switch can be either polarity (positive or ground) - Digital display shows system voltage in normal operation, inside of load manager - Digital display shows configuration information while in program mode, inside of load manager - Default configuration can be restored at any time. The hi -idle feature will be installed to activate the hi -idle on an electronic engine of a commercial chassis. FAST IDLE A fast idle output is activated whenever the system voltage is reduced to 12.8 VDC. The fast idle output will remain "ON" for a minimum of ten (10) minutes and until 13.0 VDC is achieved. The fast idle output is dependent on the parking brake. EXTERIOR LIGHTING Exterior lighting will meet or exceed Federal Department of Transportation, Federal Motor Vehicle Safety Standards and National Fire Protection Association requirements in effect at this time. Front headlights will be halogen type and comply to all FMVSS requirements. Five (5) LED clearance/marker lights will be installed across the leading edge of the cab. INTERMEDIATE LIGHT There will be two (2) Truck -Lite@, part number 303757Y, 2.24" diameter lights with amber LEDs, grommet mount and chrome cover furnished, one (1) each side in the rear fender panel. The light will double as a turn signal and marker light. REAR CLEARANCE/MARKER/ID LIGHTING There will be three (3) Truck -Lite@, Model 35890R, LED lights used as identification lights located at the rear of the apparatus per the following: • As close as practical to the vertical centerline 30 of 78 SPECIFICATIONS • Centers spaced not less than 6.00" or more than 12.00" apart • Red in color • All at the same height There will be two (2) Truck -Lite, Model 35890R, LED lights installed at the rear of the apparatus used as clearance lights located at the rear of the apparatus per the following: • To indicate the overall width of the vehicle • One (1) each side of the vertical centerline • As near the top as practical • Red in color • To be visible from the rear • All at the same height There will be two (2) Truck -Lite, Model 35890R, LED lights installed on the side of the apparatus as marker lights as close to the rear as practical per the following: • To indicate the overall length of the vehicle • One (1) each side of the vertical centerline • As near the top as practical • Red in color • To be visible from the side • All at the same height There will be two (2) red reflectors located on the rear of the truck facing to the rear. One (1) each side, as far to the outside as practical, at a minimum of 15.00", but no more than 60.00", above the ground. There will be two (2) red reflectors located on the side of the truck facing to the side. One (1) each side, as far to the rear as practical, at a minimum of 15.00", but no more than 60.00", above the ground. Per FMVSS 108 and CMVSS 108 requirements. REAR FMVSS LIGHTING The rear stop/tail and directional LED lighting will consist of the following: • Two (2) Whelen®, Model M6BTT, red LED stop/tail lights • Two (2) Whelen, Model M6T, amber LED arrow turn lights The lights shall be provided with color lenses. The lights will be mounted in a polished combination housing. 31 of 78 SPECIFICATIONS There will be two (2) Whelen Model M6BUW, LED backup lights provided in the tail light housing. LICENSE PLATE BRACKET One (1) license plate bracket constructed of stainless steel will be provided at the rear of the apparatus. One (1) white LED light will be provided to illuminate the license plate. A polished stainless steel light shield will be provided over the light that will direct illumination downward, preventing white light to the rear. LIGHTING BEZEL There will be two (2) Whelen, Model M6FCV4P, four (4) place chromed ABS housings with Pierce logos provided for the rear M6 series stop/tail, directional, back up, scene lights or warning lights. BACK-UP ALARM A PRECO, Model 1040, solid-state electronic audible back-up alarm that actuates when the truck is shifted into reverse will be provided. The device will sound at 60 pulses per minute and automatically adjust its volume to maintain a minimum ten (10) dBA above surrounding environmental noise levels. CAB PERIMETER SCENE LIGHTS There will be four (4) Amdor, Model AY-LB-12HW020, 350 lumens each, 20.00" white LED strip lights provided, one (1) for each cab door. These lights will be activated automatically when the battery switch is on and the exit doors are opened or by the same means as the body perimeter scene lights. PUMP HOUSE PERIMETER LIGHTS There will be two (2) Amdor, Model AY-LB-12HW020, 350 lumens each, 20.00" LED weatherproof strip lights with brackets provided under the pump panel running boards, one (1) each side. If the combination of options in the vehicle does not permit clearance for a 20.00" light, a 12.00" version of the Amdor light will be installed. The lights will be controlled by the same means as the body perimeter lights. BODY PERIMETER SCENE LIGHTS There will be two (2) Amdor Model AY-LB-12HW020, 350 lumens, 20.00" LED lights provided at the rear step area of the body, one (1) each side shining to the rear. The perimeter scene lights will be activated when the battery switch is on, and a switch within reach of the driver is activated. 32 of 78 SPECIFICATIONS ADDITIONAL PERIMETER LIGHTS There will be two (2) lights - Amdor@ Model AY-LB-12HW020, 350 lumens, 20.00" long, with white LED's installed with one (1) light under compartment D1 and one (1) light under compartment P1. With the chassis battery switch energized, the lights will be activated by the same means as the body perimeter lights. STEP LIGHTS There will be four (4) white LED step lights will be provided. One (1) step light will be provided on each side, on the front compartment face and two (2) step lights at the rear to illuminate the tailboard. In order to ensure exceptional illumination, each light will provide a minimum of 25 foot-candles (fc) covering an entire 15.00" x 15.00" square placed 10.00" below the light and a minimum of 1.5 fc covering an entire 30.00" x 30.00" square at the same 10.00" distance below the light. These step lights will be activated by a switch at the driver's side pump panel. All other steps on the apparatus will be illuminated per the current edition of NFPA 1901. 12 VOLT LIGHTING There will be two (2) Whelen SlimLine, Model PSL2R5*, 12 volt LED floodlight(s) installed in semi -recessed housing(s) located one each side rear face of body towards the outside edge. The painted parts of this light assembly to be white. The light(s) selected above will be controlled by the following: a switch at the driver's side switch panel. a switch at the rear of apparatus on the driver's side. no additional switch location. no additional switch location. These light(s) may be load managed when the parking brake is set BROW LIGHT 12 VOLT LED RIDGE INDUSTRIES A Ridge Industries, model RDS- Series 54" curve, 12 volt LED spot lights will be provided. The visor light will be mounted on a special bracket on the front of the cab roof just above the windshield and below the front cab marker lights. The light shall be controlled in the following way: 33 of 78 SPECIFICATIONS Um • a switch at the driver's side switch panel. • no additional switch location. This light may be load managed when the parking brake is applied. LIGHTS BELOW HOSE BED COVER There will be two (2) 63.00" LED lights(s) provided below the aluminum hose bed cover and mounted on the cover one on each cover at the extrusions. The light(s) will be activated by a cup switch at the rear of the apparatus no more than 72.00" from the ground and when the hosebed cover is raised. 12 VOLT LIGHTING There will be two (2) Whelen Pioneer Summit Series, Model S161 MB 12 volt DC LED light(s) installed on the apparatus with brackets one (1) each side under the lower edge of the front bumper. The light(s) will be installed with flood optics. The color of the housing is black. The light(s) will be activated by a switch at the driver's side switch panel. These light(s) may be load managed when the parking brake is applied. SWITCH, DOOR There will be four (4) momentary switches installed in the overhead switch panel. • Two (2) switches on the driver side switch panel 57. • Two (2) switches on the officer side switch panel 58. All four (4) switches will include the following features: • Powered by a single 8 amp circuit breaker. • Activated with the ignition switch. • One (1) switch located on each switch panel labeled "Front Door". • One (1) switch located on each switch panel labeled "Rear Door". The wires form these switches, with ground wires, will be terminated in a 6.00" by 6.00" by 4.50" weather resistant fiber splice box located right behind the light bar between go lights. 12 VOLT LIGHTING There will be two (2) Whelen® Model P*H2*, 17,750 lumens 12 volt DC LED light(s) with a combination of flood and spot optics installed on the apparatus located, driver's side high on body, front and rear. The painted parts of this light assembly to be white. 34 of 78 SPECIFICATIONS The light(s) to be installed in a 15 degree vertical recessed bracket. The lights will be controlled by a switch at the driver's side switch panel, by a switch at the driver's side pump panel and by a switch in a recessed cup located at the driver's side rear bulkhead. The light(s) may be load managed when the parking brake is applied. 12 VOLT LIGHTING There will be two (2) Whelen@) Model P*H2*, 17,750 lumens 12 volt DC LED light(s) with a combination of flood and spot optics installed on the apparatus located, passenger's side high on body, front and rear. The painted parts of this light assembly to be white. The light(s) to be installed in a 15 degree vertical recessed bracket. The lights will be controlled by a switch at the driver's side switch panel, by a switch in a recessed cup located at the passenger's side rear bulkhead and by a switch at the passenger's side pump panel. The light(s) may be load managed when the parking brake is applied. WALKING SURFACE LIGHT There will be Model FRP, 4" round black 12 volt DC LED floodlight(s) with bolt mount provided to illuminate the entire designated walking surface on top of the body. The light(s) will be activated when the body step lights are on. 35 of 78 SPECIFICATIONS M WATER TANK Booster tank will have a capacity of 600 gallons and be constructed of polypropylene plastic by United Plastic Fabricating, Incorporated. Tank joints and seams will be nitrogen welded inside and out. Tank will be baffled in accordance with NFPA bulletin 1901 requirements. Baffles will have vent openings at both the top and bottom to permit movement of air and water between compartments. Longitudinal partitions will be constructed of .38" polypropylene plastic and will extend from the bottom of the tank through the top cover to allow for positive welding. Transverse partitions will extend from 4.00" off the bottom of the tank to the underside of the top cover. All partitions will interlock and will be welded to the tank bottom and sides. Tank top will be constructed of .50" polypropylene. It will be recessed .38" and will be welded to the tank sides and the longitudinal partitions. Tank top will be sufficiently supported to keep it rigid during fast filling conditions. Construction will include 2.00" polypropylene dowels spaced no more than 30.00" apart and welded to the transverse partitions. Two (2) of the dowels will be drilled and tapped (.50" diameter, 13.00" deep) to accommodate lifting eyes. A sump that will be sized dependent on the tank to pump plumbing will be provided at the bottom of the water tank. Sump will include a drain plug and the tank outlet. Tank will be installed in a fabricated cradle assembly constructed of structural steel. Sufficient crossmembers will be provided to properly support bottom of tank. Crossmembers will be constructed of steel bar channel or rectangular tubing. Tank will "float" in cradle to avoid torsional stress caused by chassis frame flexing. Rubber cushions, .50" thick x 3.00" wide, will be placed on all horizontal surfaces that the tank rests on. Stops or other provision will be provided to prevent an empty tank from bouncing excessively while moving vehicle. Mounting system will be approved by the tank manufacturer. 36 of 78 SPECIFICATIONS 8-51 Fill tower will be constructed of .50" polypropylene and will be a minimum of 8.00" wide x 14.00" long. Fill tower will be furnished with a .25" thick polypropylene screen and a hinged cover. An overflow pipe, constructed of 4.00" schedule 40 polypropylene, will be installed approximately halfway down the fill tower and extend through the water tank and exit to the rear of the rear axle. SLEEVE, PLUMBING, THROUGH TANK One (1) sleeve will be provided in the water tank for a 3.00" pipe to the rear. WATER TANK RESTRAINT A heavy-duty water tank restraint will be provided. DIRECT TANK FILL There will be two (2) - 2.50" gated external tank fill(s) installed and properly labeled at the rear of the water tank, located left and right side, with the valve installed as low as practical for easy hose connection. Piping, for the fill, will be routed through the rear wall of the tank and include a flow deflector to break up the stream of water entering the water tank. A 2.50" full flow ball valve with 2.50" piping and a 2.50" (F)NST chrome swivel will be located at the inlet. A 2.50" chrome plated 45 degree elbow and plug with VLH automatic pressure relieving thread technology will be provided for the tank fill. HOSE BED The hose bed will be fabricated of painted corrosion resistant, low carbon austenitic 304L stainless steel. The sides will not form any portion of the fender compartments. Upper and rear edges of side panels will have a double break for rigidity. The upper inside area of the beavertails will be covered with brushed stainless steel to prevent damage to painted surface when hose is removed. Flooring of the hose bed will be removable aluminum grating with the top surface corrugated to aid in hose aeration. The grating slats will be 0.50" x 4.50" with spacing between slats for hose ventilation. The inside of the hose bed will be unpainted and have a DA sanded finish . The inside of the cargo area will be unpainted with a DA sanded finish . 37 of 78 SPECIFICATIONS 8-52 Hose bed will accommodate 500ft of 2.5". HOSE BED DIVIDER One (1) adjustable hosebed divider will be furnished for separating hose. Each divider will be constructed of a .25" brushed aluminum sheet. Flat surfaces will be sanded for uniform appearance, or constructed of brushed aluminum. Divider will be fully adjustable by sliding in tracks, located at the front and rear of the hose bed. Divider will be held in place by tightening bolts, at each end. Acorn nuts will be installed on all bolts in the hose bed which have exposed threads. HOSE BED ACCESS DOORS AT REAR There will be two (2) aluminum treadplate doors, one (1) each side of the center ladder / hard suction storage area with vertical hinges and D -ring latches Doors will be located at the rear of the hose bed and hinges mounted to center hose and ladder storage.A filler plate will be added to the top edge to close off the upper opening, mounted on rear hose bed cover support. HOSE BED ACCESS DOOR/S There will be two (2) aluminum treadplate door(s), each with a flush lift and turn latch, within the hosebed cover One (1) for the water tank dome and one (1) for the foam dome. CABLE STOP FOR HOSE BED COVER There will be two (2) safety cable(s) provided for the hosebed cover to provide additional support. HOSE BED COVER & WALKWAY A two (2) section hose bed cover, constructed of .125" bright aluminum treadplate will be furnished. The cover will be hinged with full length stainless steel piano hinge. A walkway will be provided in the center of the hose bed. The walkway will be formed by two (2) unpainted hose bed dividers with grating for the flooring. Each divider will have a brace back to the body panels to provided support. Each hose bed cover will rest on the top of the dividers. The cover will be open in the center for the walkway. The cover will be reinforced so that it can support the weight of a man walking on the cover. If access to water tank fill tower is blocked by the hose bed cover, then a hinged door will be provided in it so that tank may be filled without raising cover doors. Chrome grab handles and gas filled cylinders will be provided to assist in opening and closing the cover. 38 of 78 SPECIFICATIONS 8-53 RUNNING BOARDS Running boards will be fabricated of .125" bright aluminum treadplate. Each running board will be supported by a welded 2.00" square tubing and channel assembly, which will be bolted to the pump compartment substructure. Running boards will be 12.75" deep and spaced .50" away from the pump panel. A splash guard will be provided above the running board treadplate. TAILBOARD The tailboard will also be constructed of .125" bright aluminum treadplate and spaced .50" from the body, as well as supported by a structural steel assembly. The tailboard area will be 10.00" deep. The outboard sides of the tailboard will be angled at 45 degrees beginning at the point where the body meets the tailboard at the outboard edge angling rearward to the rear edge of the tailboard. The exterior side will be flanged down and in for increased rigidity of tailboard structure. REAR WALL, SMOOTH ALUMINUM/BODY MATERIAL, TREADPLATE CENTER The rear facing surfaces of the center rear wall will be aluminum treadplate. The rear facing surfaces of the bulkheads, the surface to the rear of the side body compartments, will be smooth and the same material as the body. Any inboard facing surfaces below the height of the hosebed will be aluminum diamondplate. TOW EYES Two (2) rear painted tow eyes will be located at the rear of the apparatus mounted to the rear substructure below the body which is attached directly to the chassis frame rails. The inner and outer edges of the tow eyes will have a radius. COMPARTMENTATION Body and compartments will be fabricated of corrosion resistant, low carbon austenitic 304L stainless steel. Side compartments will be an integral assembly with the rear fenders. Circular fender liners will be provided for prevention of rust pockets and ease of maintenance. Side compartment flooring will be of the sweep out design with the floor higher than the compartment door lip. The side compartment door opening will be framed by flanging the edges in 1.75" and bending out again .75" to form an angle. 39 of 78 SPECIFICATIONS Drip protection will be provided above the doors by means of bright aluminum extrusion, formed bright aluminum treadplate or polished stainless steel. The top of the compartment will be covered with bright aluminum treadplate rolled over the edges on the front, rear and outward side. These covers will have the corners TIG welded. Side compartment covers will be separate from the compartment tops. Front facing compartment walls will be covered with bright aluminum treadplate. All screws and bolts which protrude into a compartment will have acorn nuts on the ends to prevent injury. UNDERBODY SUPPORT SYSTEM Due to the severe loading requirements of this pumper a method of body and compartment support suitable for the intended load will be provided. The backbone of the support system will be the chassis frame rails which is the strongest component of the chassis and is designed for sustaining maximum loads. The support system will include .375" thick steel vertical angle supports bolted to the chassis frame rails with .625" diameter bolts. Attached to the bottom of the steel vertical angles will be horizontal angles, with gussets welded to the vertical members, which extend to the outside edge of the body. A steel frame will be mounted on the top of these supports to create a floating substructure which will result in a 500 Ib equipment support rating per lower compartment. The floating substructure will be separated from the horizontal members with neoprene elastomer isolators. These isolators will reduce the natural flex stress of the chassis from being transmitted to the body. The isolators will have a broad load range, proven viability in vehicular applications, be of a fail safe design and allow for all necessary movement in three (3) transitional and rotational modes. The neoprene isolators will be installed in a modified V three (3) -point mounting pattern to reduce the natural flex of the chassis being transmitted to the body. AGGRESSIVE WALKING SURFACE All exterior surfaces designated as stepping, standing, and walking areas will comply with the required average slip resistance of the current NFPA standards. 40 of 78 SPECIFICATIONS 8-55 LOUVERS Louvers will be stamped into compartment walls to provide the proper airflow inside the body compartments and to prevent water from dripping into the compartment. Where these louvers are provided, they will be formed into the metal and not added to the compartment as a separate plate. TESTING OF BODY DESIGN Body structural analysis will be fully tested. Proven engineering and test techniques such as finite element analysis, model analysis, stress coating and strain gauging have been performed with special attention given to fatigue, life and structural integrity of the cab, body and substructure. The body will be tested while loaded to its greatest in-service weight. The criteria used during the testing procedure will include: - Raising opposite corners of the vehicle tires 9.00" to simulate the twisting a truck may experience when driving over a curb. - Making a 90 degree turn, while driving at 20 mph to simulate aggressive driving conditions. - Driving the vehicle on at 35 mph on a washboard road. - Driving the vehicle at 55 mph on a smooth road. - Accelerating the vehicle fully, until reaching the approximate speed of 45 mph on rough pavement. Evidence of the actual testing techniques are available upon request. LEFT SIDE COMPARTMENTATION A vertically hinged, double door compartment over the rear wheels will be provided. The interior dimensions of this compartment will be 66.50" wide x 32.88" high x 25.88" deep. The depth of the compartment will be calculated with the compartment door closed. The clear door opening of this compartment will be 59.50" wide x 28.25" high. The D -handle latch will be positioned lower on the latch door for easier access. Positive door holders will be furnished with this compartment. A full height, vertically hinged, double door compartment behind the rear wheels will be provided. The interior dimensions of this compartment will be 43.50" wide x 61.63" high x 25.88" deep. The depth of the compartment will be calculated with the compartment door closed. The compartment interior will be fully open from the compartment ceiling to the compartment floor and designed so that no permanent dividers are required between the 41 of 78 SPECIFICATIONS WMI upper and lower sections. The clear door opening of this compartment will be 42.00" wide x 57.00" high. Positive door holders will be furnished with this compartment. RIGHT SIDE COMPARTMENTATION A vertically hinged, double door compartment over the rear wheels will be provided. The interior dimensions of this compartment will be 66.50" wide x 32.88" high x 12.00" deep. The depth of the compartment will be calculated with the compartment door closed. The clear door opening of this compartment will be 59.50" wide x 28.25" high. The D -handle latch will be positioned lower on the latch door for easier access. Positive door holders will be furnished with this compartment. A full height, vertically hinged, double door compartment behind the rear wheels will be provided. The interior dimensions of this compartment will be 43.50" wide x 61.63" high x 25.88" deep in the lower 20.00" of the compartment and 12.00" deep in the remaining upper portion. The depth of the compartment will be calculated with the compartment door closed. The compartment interior will be fully open from the compartment ceiling to the compartment floor and designed so that no permanent dividers are required between the upper and lower sections. The clear door opening of this compartment will be 42.00" wide x 57.00" high. Positive door holders will be furnished with this compartment. SIDE COMPARTMENT DOORS All hinged compartment doors will be lap style with double panel construction and will be a minimum of 1.50" thick. To provide additional door strength a "C" section reinforcement will be installed between the outer and interior panels. Doors will be provided with a closed cell rubber gasket around the surface that laps onto the body. A second heavy-duty automotive rubber molding with a hollow core will be installed on the door framing that seals onto the interior panel, to ensure a weather resisting compartment. All compartment doors will have polished stainless steel continuous hinge with a pin diameter of .25" that is bolted or screwed on with stainless steel fasteners. All door locking mechanisms will be fully enclosed within the door panels to prevent fouling of the lock in the event equipment inside shifts into the lock area. Doors will be latched with recessed, polished stainless steel "D" ring handles and FMVSS approved door locking mechanisms. 42 of 78 SPECIFICATIONS 8-57 To prevent corrosion caused by dissimilar metals, compartment door handles will not be attached to outer door panel with screws. A rubber gasket will be provided between the "D" ring handle and the door. REAR COMPARTMENTATION A vertically hinged, double door compartment above the rear tailboard will be provided. The interior dimensions of this compartment will be 40.00" wide x 40.63" high x 25.88" deep. The interior height of the compartments will be measured from the compartment floor to the ceiling. The depth of the compartments will be measured from the back wall to the inside of the door frame. A louvered, removable access panel will be furnished on the back wall of the compartment. The rear compartment will be open into the rear side compartments. The clear door opening of this compartment will be 32.00" wide x 35.88" high. Closing of the door will not require releasing, unlocking, or unlatching any mechanism and will easily be accomplished with one hand. Each of the vertically hinged compartment doors will be provided with a positive door holder. REAR COMPARTMENT DOORS All hinged compartment doors will be lap style with double panel construction and will be a minimum of 1.50" thick. To provide additional door strength, a "C" section reinforcement will be installed between the outer and interior panels Doors will be provided with a closed cell rubber gasket around the surface that laps onto the body. A second heavy-duty automotive rubber molding with a hollow core will be installed on the door framing that seals onto the interior panel, to ensure a weather resisting compartment.. All compartment doors will have polished stainless steel continuous hinge with a pin diameter of .25", that is bolted or screwed on with stainless steel fasteners. A strip of dielectric isolation tape will be provided between the hinge and the doorjamb. All door lock mechanisms will be fully enclosed within the door panels to prevent fouling of the lock in the event equipment inside shifts into the lock area. Doors will be latched with recessed, polished stainless steel "D" ring handles and Eberhard 106 locks. To prevent corrosion caused by dissimilar metals, compartment door handles will not be attached to outer door panel with screws. A rubber gasket will be provided between the "D" ring handle and the door. 43 of 78 SPECIFICATIONS WWI PULL STRAP, DOORS There will be two (2) compartment doors provided with pull straps. D2 and P2. KEYED LOCK(S) There will be ten (10) compartment doors that require a keyed lock. The compartments to have a keyed lock shall be all body doors and compartments under cab. MODIFY REAR COMPARTMENT DOORS The exterior of the doors on the center rear compartment will be a painted surface only. There will be no aluminum treadplate located here. DOOR FRAME SCUFFPLATE Six (6) scuffplates will be provided for the lower door frame of all body doors. Each scuffplate will be polished stainless steel with a .38" lip down. SCUFFPLATE, INSIDE DOOR PAN The six (6) compartment doors will include a polished stainless steel scuffplate to cover the lower portion of the inside door pan of each door. Each scuffplate will be 8.00" high and full width of the compartment door pan. Scuffplate will be located all body doors. COMPARTMENT LIGHTING There will be seven (7) compartment(s) with two (2) white 12 volt DC LED compartment light strips. The dual light strips will be centered vertically along each side of the door framing. There will be two (2) light strips per compartment.The dual light strips will be in all body compartment(s) Any remaining compartments without light strips will have a 6.00" diameter Truck -Lite, Model: 79384 light. Each light will have a number 1076 one filament, two wire bulb. Opening the compartment door will automatically turn the compartment lighting on. ADDITIONAL COMPARTMENT LIGHTING There will be two (2) 9.00" white 12 volt DC LED strip light(s) provided in the compartments under the cab compartment(s). Opening the compartment door(s) will automatically turn the compartment lighting on. HATCH COMPARTMENT One (1) hatch compartment 114.00" long x 13.75" wide x 20.00" maximum depth will be provided above the right side compartments, with two (1) lift -up top opening hatch door. (Top of hatch compartments are not to be higher than the top of the cab.) The compartment will extend the full length of the side body compartmentation. 44 of 78 SPECIFICATIONS F -IMS Sides of the compartment will be constructed of the same material as the body and painted job color. A chrome and black vinyl molding will be provided to cover the seam between the top of the body panel and the bottom of the hatch compartment. The vertical outboard seam at the center of the compartment will be smooth weld finished and painted. Top of the compartment will be constructed of bright aluminum treadplate. One (1) liftup, bright aluminum treadplate door will be provided on the top of the compartment, with a pair of chrome grab handles. The door will have lipped edges with a rubber seal for weather resistance and has two (2) recessed lights. The door will be hinged on the outboard side and will be held open with gas springs. D -handle latches will be provided to hold the door in the closed position. The door will have a clear door opening of approximately 108.00" long x 8.00" wide. The compartment will drain to an area below the hose bed. HATCH COMPARTMENT One (1) hatch compartment 113.75" long x 27.75" wide x 22.00" maximum depth will be provided above the left side compartments, with two (2) liftup top opening hatch doors. Compartment will extend the full length of the side body compartmentation. Sides of the compartment will be constructed of the same material as the body and painted job color. A chrome and black vinyl molding will be provided to cover the seam between the top of the body panel and the bottom of the hatch compartment. The vertical outboard seam at the center of the compartment will be smooth weld finished and painted. Top of the compartment will be constructed of bright aluminum treadplate. Two (2) liftup, bright aluminum treadplate doors will be provided on the top of the compartment, each with a chrome grab handle. Doors will have lipped edges with a rubber seal for weather resistance, and an inner pan with one (1) recessed light. Doors will be hinged on the outboard side and will be held open with gas springs. D -handle latches will be provided with each door to hold the doors in the closed position. Each door will have a clear door opening of 51.00" long x 21.50" wide. Compartment will drain to an area below the hose bed. 45 of 78 SPECIFICATIONS MOUNTING TRACKS There will be five (5) sets of tracks for mounting shelf(s) in LS1, LS2, RS1, RS2 and B1. These tracks will be installed vertically to support the adjustable shelf(s), and will be full height of the compartment. The tracks will be unpainted with a natural finish. ADJUSTABLE SHELVES There will be three (3) shelves provided Two in D1 and one directly on top of the tool box in P1. The shelf construction will consist of .188" aluminum painted spatter gray. A capacity rating will not be available on this item due to a reduced side height being less than 2.00". Each shelf will be infinitely adjustable by means of a threaded fastener, which slides in a track. Each shelf will as wide and as deep as the compartment space shall allow. The shelves will be held in place by .12" thick stamped plated brackets and bolts. The side height of the shelf/shelves will be as follows: • Front: 1.00" high • Rear: 2.00" high • Left & Right Sides: 2.00" high ADJUSTABLE SHELVES There will be five (5) shelves with a capacity of 500 Ib provided. The shelf construction will consist of .188" aluminum painted spatter gray with 2.00" sides. Each shelf will be infinitely adjustable by means of a threaded fastener, which slides in a track. The shelves will be held in place by .12" thick stamped plated brackets and bolts. The location(s) will be in RS2 centered between the floor and the ceiling, in RS1 in the upper third, in RS1 in the upper third, in LS2 centered between the floor and ceiling and in B1 centered between the floor and ceiling. SLIDE -OUT FLOOR MOUNTED TRAY There will be two (2) floor mounted slide -out tray(s) provided P1. A capacity rating will not be available on this tray due to a reduced side height being less than 2.00". The tray(s) will be constructed of a minimum .13" aluminum with welded corners. The finish will be painted to match compartment interior. The tray(s) will be designed for maximum compartment width and depth. The side height of the tray(s) will be as follows: • Front: 1.00" high • Rear: 2.00" high 46 of 78 SPECIFICATIONS • Left and Right Sides: 2.00" high There will be two undermount-roller bearing type slides rated at 2501b each provided. The pair of slides will have a safety factor rating of 2. To ensure years of dependable service, the slides will be coated with a finish that is tested to withstand a minimum of 1,000 hours of salt spray per ASTM 8117. To ensure years of easy operation, the slides will require no more than a 501b force for push -in or pull-out movement when fully loaded after having been subjected to a 40 hour vibration (shaker) test under full load. The vibration drive file will have been generated from accelerometer data collected from a heavy truck chassis driven over rough gravel roads in an unloaded condition. Proof of compliance will be provided upon request. Automatic locks will be provided for both the "in" and "out" positions. The trip mechanism for the locks will be located at the front of the tray for ease of use with a gloved hand. DRAWER ASSEMBLY A slideout drawer assembly will be installed D1. The clear dimensions starting at the top of the cabinet with the first drawer will be 2.25" with a face plate that is 3.00" high x 21.00" deep. The clear dimensions of the second drawer will be 4.75" with a face plate that is 5.00" high x 21.00" deep. The clear dimensions of the third drawer will be 6.75" with a face plate that is 7.00" high x 21.00" deep. The clear dimensions of the fourth drawer will be 8.75" with a face plate that is 9.00" high x 21.00" deep. Each drawer will be the same width and not exceed 24.00". The drawers will have a capacity of 250 pounds. The drawers will be mounted in a cabinet housing constructed of light gray powder coated aluminum with anodized aluminum frames. The housing will be 24.00" deep, and completely enclose the drawer. A full-length aluminum extruded rail will be provided at the top edge of each drawer. This rail will act as the latching mechanism as well as the handle for each drawer. There will be a total of one (1) provided. COMPARTMENT FLOOR SCUFFPLATE The compartment floor of the compartment(s) body compartments will be lined with brushed stainless steel. There will be a total of six (6) compartment floors covered by the scuffplate. LOWER BODY TRIM Bottom edge of the side compartments will be trimmed with bright aluminum treadplate. 47 of 78 SPECIFICATIONS „, Trim will be 2.00" high with a 1.00" flange turned inward for rigidity. The trim will not be an integral part of the body construction, which allows replacement in the event of damage. BODY FENDER CROWNS Black rubber fender crowns will be provided around the rear wheel openings. BODY FENDER LINER A unpainted brushed stainless fender liner will be provided. The liners will be removable to aid in the maintenance of rear suspension components. HARD SUCTION HOSE Three (3) lengths of 2.50" clear corrugated PVC hard suction hose, 8' in length, will be provided. The hose will be equipped with a long handle female coupling on one (1) end and a rocker lug male coupling on the other end. Couplings will be hard coated aluminum. HARD SUCTION HOSE TROUGHS Storage for three (3) hard suction hoses will be provided. Hoses will be carried in troughs, mounted one (1) above the other, inside the hose bed. The troughs will be constructed of unpainted stainless steel. The length of the hoses will not be longer than the length of the hose bed. This hose storage will be combined with the ladder storage defined elsewhere in this proposal. The same style of retaining device used for the ladders will be used to contain the hard suction hoses. HANDRAILS The handrails will be 1.25" diameter anodized aluminum extrusion, with a ribbed design, to provide a positive gripping surface. Chrome plated end stanchions will support the handrail. Plastic gaskets will be used between end stanchions and any painted surfaces. Drain holes will be provided in the bottom of all vertically mounted handrails. Handrails will be provided to meet NFPA 1901 section 15.8 requirements. The handrails will be installed as noted on the sales drawing. • One (1) vertical handrail will be located on each rear bulkhead. • One (1) full width horizontal handrail will be provided below the hose bed at the rear of the apparatus. 48 of 78 SPECIFICATIONS • One (1) handrail will be provided and mounted on the DS along the outer edge of the hosebed cover running forward to aid in getting to cover. AIR PACK STORAGE A total of two (2) air pack compartment(s) will be provided and located forward of the rear wheel each side. The air pack compartment(s) will be tapered to match the profile of the space available in the fender. The compartment(s) will be approximately 15.50" wide at the top and 5.00" wide at the bottom for the wheel cutout. The compartment(s) will be 15.50" tall at the body side compartment and 6.00" tall at the wheel cutout. The compartment(s) will be 26.00" deep and have a drain hole. Inside the compartment, black rubber matting will be provided. A brushed stainless steel hinged door with a Southco raised trigger C2 chrome lever latch will be provided to contain the air pack. A dielectric barrier will be provided between the door hinge, hinge fasteners and the body sheet metal. AIR BOTTLE STORAGE / OPEN STORAGE A quantity of two (2) air bottle compartments designed to a minimum of two (2) air bottles up to 7.25" in diameter x 26.00" deep plus storage for additional items shall be provided on the driver side rearward of the rear wheels and on the passenger side rearward of the rear wheels. A brushed stainless steel door with a flush Southco C2 chrome latch shall be provided to contain the air bottle. A dielectric barrier shall be provided between the door hinge, hinge fasteners and the body sheet metal. The seams and hinge side will be taped to prevent dust from getting into the compartment(s). Inside the compartment, black Dura -Surf friction reducing material shall be provided. EXTENSION LADDER There will be a 19'9", three (3) section, aluminum, Duo -Safety, Series 912-A extension ladder provided. ROOF LADDER NFPA 1901, 2016 edition, section 5.8.1.2 requires a roof ladder. The roof ladder is not on the apparatus as manufactured. Per Fire Department specification, there will be no roof ladder provided. This apparatus will be non-compliant to NFPA 1901 standards effective at time of contract execution. LADDER STORAGE The ladder will be stored inside the hose bed on the right side . The ladder will be contained entirely within the hose bed and will not extend through the front sheet, nor extend rearward beyond the rear edge of the hose bed. 49 of 78 SPECIFICATIONS Wo The ladder will be stored in the vertical position. The storage assembly will be fabricated of unpainted aluminum and have stainless steel slide angles to aid in loading and removal of the ladder. The rear of storage area will have a vertically hinged single pan door constructed from aluminum treadplate . The hinge will be located along the inboard edge . The latch will be a D -handle latch FOLDING LADDER NFPA 1901, 2016 edition, section 5.8.1.2 requires a folding ladder. The folding ladder is not on the apparatus as manufactured. Per Fire Department specification, there will be no folding ladder provided. This apparatus will be non-compliant to NFPA 1901 standards effective at time of contract execution. PIKE POLE PROVIDED BY FIRE DEPARTMENT NFPA 1901, 2016 edition, Section 5.9.4 requires one (1) 8 ft or longer pike pole mounted in a bracket fastened to the apparatus. The pike pole is not on the apparatus as manufactured. The fire department will provide and mount the pike pole. The pike pole(s) will be a Duo -Safety 10' pike pole. W PIKE POLE PROVIDED BY FIRE DEPARTMENT NFPA 1901, 2016 edition, Section 5.9.4 requires one (1) 6' pike pole or plaster hook mounted in a bracket fastened to the apparatus. The pike pole is not on the apparatus as manufactured. The fire department will provide and mount the pike pole. The pike pole(s) will be a Duo -Safety 6' pike pole. STEPS A folding step will be provided on the front of each fender compartment. The step will be bright finished, non-skid with a black coating. Each step will incorporate an LED light to illuminate the stepping surface. The step can be used as a hand hold with two openings wide enough for a gloved hand. REAR FOLDING STEPS Bright finished, non-skid folding steps with a black coating will be provided at the rear. Each step will incorporate an LED light to illuminate the stepping surface. The steps can be used as a hand hold with two openings wide enough for a gloved hand. 50 of 78 SPECIFICATIONS : Me STEP, FLIP DOWN There shall be one (1) flip down style step(s) provided below the rear tailboard. The step(s) shall be 20.00" wide and shall flip down to provide easy access. The step(s) shall be mounted on the driver's side of the tailboard This step will be tied into the Do Not Move indicator system 11 -ZONE BRACKETS Two (2) flip -out I -Zone brackets will be provided and mounted at the rear of the apparatus, located one each side of the rear body as per drawing approximately 68" up from the ground. The brackets will be designed with adequate reinforcement to eliminate flexing of the body (oil canning). Two (2) additional folding steps will be located front left body. The step(s) will be bright finished, non-skid with a black coating. Each step will incorporate an LED light to illuminate the stepping surface. The step(s) can be used as a hand hold with two openings wide enough for a gloved hand. AUXILIARY FIRE PUMP A Darley 1.5AGE powered by a diesel Kubota 24 hp 3 cylinder water cooled engine will be provided. The pump manufacturer will state that this pump will have the following performance rating as bench tested at their facility: 25 GPM @ 335 PSI 75 GPM @ 220 PSI 120 GPM @ 130 PSI It is expected that the actual performance as installed on an apparatus and measured at a discharge will be less than indicated above. This pump will not meet NFPA 1901 section 17.2.3 for normal-pressure auxiliary pump performance and classification requirements. The following pump panel controls will be provided: • Twist ignition and stop switch • Electric throttle control • Push button primer • Engine running light • Glow plug light • Low oil pressure warning light 51 of 78 SPECIFICATIONS •. High engine temperature warning light The pump will have a self adjusting mechanical pump seal. AUXILIARY PUMP INSTALLATION The auxiliary pump will be installed above the main pump in the cargo area. All serviceable items such as air filters, oil filters, and drains shall be accessible for routine maintenance without requiring removal of any plumbing or major engine components; such as complete removal of the exhaust system or air filter housing. AUXILIARY FUEL PUMP An auxiliary electric fuel pump with a pick up tube will be added to the chassis fuel tank. The pump and pick up tube will be for the supply of fuel to the auxiliary pump. In order assure that the auxiliary engine cannot exhaust the fuel supply of the vehicle, the tube will not be able to draw the fuel tank down to less than 12 gallons of remaining fuel. AUXILIARY PUMP EXHAUST ROUTING The exhaust system for the auxiliary pump will terminate vertically to keep exhaust away from fire fighters as much as possible. The exhaust pipe will terminate with a rain cap to keep the system dry. The exhaust system will be modified by the apparatus manufacturer (if required) to provide a low profile. The muffler will be in a horizontal position unless the exhaust system is lower than other parts of the apparatus and not subject to damage from low limbs etc. AUXILIARY PUMP DISCHARGE CONNECTIONS A discharge manifold will be supplied as required to allow plumbing of the required discharges. This pump will supply water to all foam capable discharge outlets Check valve(s) will be provided to prevent backflows between the main pump and the auxiliary pump. AUXILIARY PUMP -TANK TO PUMP CONNECTION An independent 2.50" tank to pump piping with a 2.50" valve will be provided for the auxiliary pump. It will not be part of the main pump's tank to pump line nor draw water through the main pump. The design will include a method for anti -swirl protection and prevent pump cavitation. The tank to pump line will run from the pump into the front face of the water tank. A rubber coupling will be included in this line to prevent damage from vibration or chassis flexing. A 52 of 78 SPECIFICATIONS MIN check valve will be provided in the tank to pump supply line to prevent the possibility of "back filling" the water tank. This tank to pump connection will have an electric valve that will open when the Pierce hydraulic pressure controller(s) "ON" switch is activated. The valve will close when the "OFF" switch is activated. The electric tank to pump valve will not be gateable. AUXILIARY PUMP PRIMER The auxiliary pump system will be primed with the main pump primer as defined elsewhere in this specification. AUXILIARY PUMP, SECONDARY CONTROLS In addition to the primary auxiliary pump controls at the pump operator's position, a control panel will also be installed in the cab for pump and roll operation. The following cab controls will be provided • Twist ignition and stop switch • Electric throttle control • Push button primer • Engine running light • Glow plug light • Low oil pressure warning light • High engine temperature warning light AUXILIARY PUMP AUTOMATIC RECIRCULATING LINE The auxiliary pump will be furnished with a 0.375" automatic pump recirculating line with a check valve. The line will be routed from the discharge side of the auxiliary pump to the water tank. This line will be designed to circulate water continuously from the auxiliary pump back to the tank to help maintain the water pump temperature at a safe level. The recirculating line will be plumbed into the water tank dome. It will include a check valve to facilitate priming and prevent water backflow. The check valve will be installed as close as possible to the water tank dome. AUXILIARY PUMP COVER A hinged cover with suitable latches will be provided over the pump and power unit assembly. The area around the assembly will remain open for maintenance and air circulation and the radiator will be located behind an expanded metal screen. 53 of 78 SPECIFICATIONS :.: PUMP A power takeoff (PTO) driven Darley JMP two (2) stage booster pump with a rating of 500 gallons per minute at 150 psi will be provided. The pump casing will be a vertically split design constructed of alloy cast iron. The volute will be designed to hydraulically neutralize radial thrust. The impellers will be constructed of high strength bronze alloy and will be accurately balanced and splined to the pump shaft for precision fit and durability. The opposed impeller design will eliminate end thrust. The pump shaft will be stainless steel with a ceramic hard coating under the shaft. NFPA COMPLIANCY NFPA 1901, 2016 edition, section 5.2 - Pumper Fire Apparatus requirements - ... "shall be equipped with a fire pump ... that has a minimum rated capacity of 750 gpm". Per fire department specification and request of this option, this apparatus will be non- compliant to NFPA 1901, 2016 edition, section 5.2, effective at time of contract execution. MECHANICAL SEALS Silicon carbide mechanical seals shall be provided. The seals shall be spring loaded and self- adjusting. The seals shall have a minimum thermal conductivity of 126 W/m*K to run cooler. Seals shall have a minimum hardness of 2800 kg/mm2 to be more resistant to wear, and have thermal expansion characteristics of no more than 4.0 X106mm/mm*K to be more resistant to thermal shock. PUMP TRANSMISSION A three gear transmission with helical gears and a 1.375" diameter splined shaft will be provided. The pump transmission will be driven by a hot shift PTO attached to the Allison Transmission, PUMPING MODE An interlock system will be provided to ensure that the pump drive system components are properly engaged so that the apparatus can be safely operated. The interlock system will be designed to allow stationary pumping and the truck to be in motion while pumping. A digital pump pressure gauge will be supplied in the cab. PUMP SHIFT A pump shift will be provided within easy reach of the driver for engagement of the PTO driven pump. The shift will include the indicator lights as mandated by NFPA. The pump shift control will be illuminated to meet NFPA requirements. 54 of 78 SPECIFICATIONS AUXILIARY COOLING SYSTEM A supplementary heat exchange cooling system will be provided to allow the use of water from the discharge side of the pump for cooling the engine water. The heat exchanger will be cylindrical type and will be a separate unit. The heat exchanger will be installed in the pump or engine compartment with the control located on the pump operator's control panel. Exchanger will be plumbed to the master drain valve. TRANSFER VALVE A power transfer valve will be provided. INTAKE RELIEF VALVE - PUMP There will be One (1) Elkhart Style 40 relief valve(s) installed on the suction side of the pump preset at 125 psig. The relief valve(s) will have a working range of 75 psi to 250 psi. The outlet will terminate below the frame rails with a 2.50" National Standard hose thread adapter and will have a "do not cap" warning tag. The relief valve pressure control will be located behind behind the right side pump panel with a stainless steel access door . RELIEF VALVE A Darley adjustable relief valve, specially designed for fire service, will be provided. PRIMER SYSTEM A Waterous electric pump priming system conforming to standards outlined in the current edition of NFPA 1901 will be furnished with the apparatus. One (1) VPO electric motor driven rotary vane primer will be provided. One (1) VAP vacuum activated priming valve will be plumbed to the main pump. Two (2) momentary push-button controls will be provided, with one located at the pump operator's panel for the main pump and one located in the cab near the auxiliary pump controls. The push button control system control will operate an electric priming motor and the priming valve will automatically open during priming and close when the primer is deactivated. CHECK VALVES A check valve will be installed in the discharge line from the auxiliary pump. PUMP DRAIN A Trident multi port pump drain will be used in place of the standard pump drain. 55 of 78 SPECIFICATIONS I-Imut PUMP MANUALS There will be a total of two (2) pump manuals provided by the pump manufacturer and furnished with the apparatus. The manuals will be provided by the pump manufacturer in the form of two (2) electronic copies. Each manual will cover pump operation, maintenance, and parts. PLUMBING, STAINLESS STEEL AND HOSE All inlet and outlet lines will be plumbed with either stainless steel pipe, hydraulic type hose or synthetic rubber hose reinforced with hi -tensile polyester braid. All hose's will be equipped with brass or stainless steel couplings. All stainless steel hard plumbing will be a minimum of a schedule 10 wall thickness. Where vibration or chassis flexing may damage or loosen piping or where a coupling is required for servicing, the piping will be equipped with victaulic or rubber couplings. Plumbing manifold bodies will be ductile cast iron or stainless steel. All piping lines are to be drained through a master drain valve or will be equipped with individual drain valves. All drain lines will be extended with a hose to drain below the chassis frame. All water carrying gauge lines will be hydraulic or reinforced poly hose. All piping, hose and fittings will have a minimum of a 700 PSI hydrodynamic pressure rating. FOAM SYSTEM PLUMBING All piping that is in contact with the foam concentrate or foam/water solution will be stainless steel. The fittings will be stainless steel or brass. Cast iron pump manifolds will be allowed. MAIN PUMP INLETS A 4.00" pump manifold inlet will be provided on each side of the vehicle. The suction inlets will include removable die cast zinc screens that are designed to provide cathodic protection for the pump, thus reducing corrosion in the pump. MAIN PUMP INLET CAP The main pump inlets will have National Standard Threads with a rocker lug chrome plated cap. The cap will be the Pierce VLH, which incorporates an exclusive thread design to automatically relieve stored pressure in the line when disconnected. VALVES All ball valves will be Akron® Brass. The Akron valves will be the 8000 series heavy-duty style with a stainless steel ball and a simple two -seat design. No lubrication or regular maintenance is required on the valve. 56 of 78 SPECIFICATIONS 8-71 Valves will have a ten (10) year warranty. LEFT SIDE INLET There will be one (1) auxiliary inlet with a 2.50" valve at the left side pump panel, terminating with a 2.50" (F) National Standard hose thread adapter. The auxiliary inlet will be provided with a strainer, chrome swivel and plug. RIGHT SIDE INLET There will be one (1) auxiliary inlet with a 2.50" valve at the right side pump panel, terminating with a 2.50" (F) National Standard hose thread adapter. The auxiliary inlet will be provided with a strainer, chrome swivel and plug. Inlet valve location will be outside the pump panel. INLET CONTROL The side auxiliary inlet(s) will incorporate a quarter -turn ball valve with the control located at the inlet valve. The valve operating mechanism will indicate the position of the valve. INLET BLEEDER VALVE A 0.75" bleeder valve will be provided for each side gated inlet. The valves will be located behind the panel with a swing style handle control extended to the outside of the panel. The handles will be chrome plated and provide a visual indication of valve position. The swing handle will provide an ergonomic position for operating the valve without twisting the wrist and provides excellent leverage. The water discharged by the bleeders will be routed below the chassis frame rails. TANK TO PUMP The booster tank will be connected to the intake side of the pump with 4.00" heavy duty piping and a quarter turn 3.00" full flow line valve with the control remotely located at the operator's panel. Tank to pump line will run straight (no elbows) from the pump into the front face of the water tank and angle down into the tank sump. A rubber coupling will be included in this line to prevent damage from vibration or chassis flexing. The control on the pump panel will be "in" when the valve is open and "out" when the valve is closed. A check valve will be provided in the tank to pump supply line to prevent the possibility of "back filling" the water tank. TANK REFILL A 1.50" combination tank refill and pump re -circulation line will be provided, using a quarter - turn full flow ball valve controlled from the pump operator's panel. 57 of 78 SPECIFICATIONS 8-72 LEFT SIDE DISCHARGE OUTLETS There will be one (1) discharge outlet with a 2.50" valve on the left side of the apparatus, terminating with a 2.50" (M) National Standard hose thread adapter. There will be one (1) discharge outlet with a 2.00" valve on the left side of the apparatus, below the deadlays, terminating with a male 2.50" National Standard hose thread adapter. In addition, the discharge will be equipped with a 2.50" (F) x 1.50" (M) NST reducer. RIGHT SIDE DISCHARGE OUTLETS There will be one (1) discharge outlet with a 2.50" valve on the right side of the apparatus, terminating with a 2.50" (M) National Standard hose thread adapter. The outlet(s) are to be considered non-NFPA 1901. Section 16.7.8.1 of NFPA 1901 standards states that "each pump discharge will have a valve that can be controlled from the pump operator's position". The discharge(s) will be non-compliant per customer specification. There will be one (1) discharge outlet with a 2.00" valve on the right side of the apparatus, terminating with a 1.50" (M) National Standard hose thread adapter. FRONT DISCHARGE OUTLET There will be one (1) 1.50" discharge outlet piped to the front of the apparatus and located in the left side front bumper tray. Plumbing will consist of 2.00" piping and flexible hose with a 2.00" ball valve with control at the pump operator's panel. A fabricated weldment made of stainless steel pipe will be used in the plumbing where appropriate. The piping will terminate with a 1.50" NST with 90 degree stainless steel swivel. There will be automatic drains provided at all low points of the piping. REAR DISCHARGE OUTLET There will be one (1) discharge outlet piped to the rear of the hose bed, on right side, installed so proper clearance is provided for spanner wrenches or adapters. Plumbing will consist of 2.50" piping along with a 2.50" full flow ball valve controlled at the outlet. The outlet(s) are to be considered non-NFPA 1901. Section 16.7.8.1 of NFPA 1901 standards states that "each pump discharge will have a valve that can be controlled from the pump operator's position". The discharge(s) will be non-compliant per customer specification. DISCHARGECAPS/ INLET PLUGS Chrome plated, rocker lug, caps with vinyl covered cables will be furnished for all discharge outlets 1.00" thru 3.00" in size, besides the pre -connected hose outlets. Chrome plated, rocker lug, plugs with vinyl covered cables will be furnished for all auxiliary inlets 1.00" thru 3.00" in size. 58 of 78 SPECIFICATIONS 8-73 The caps and plugs will incorporate a thread design to automatically relieve stored pressure in the line when disconnected (no exception). PLUMBING SYSTEM DRAIN The discharges and plumbing will drain through a main pump drain system that accommodates the plumbing system. Individual drains or bleeders for each discharge will not be required. LEFT SIDE OUTLET ELBOWS The 2.50" discharge outlets located on the left side pump panel will be furnished with a 2.50" (F) National Standard hose thread x 2.50" (M) National Standard hose thread, chrome plated, 45 degree elbow. The elbow will be Pierce VLH, which incorporates an exclusive thread design to automatically relieve stored pressure in the line when disconnected. RIGHT SIDE OUTLET ELBOW/CAP PROVIDED BY FIRE DEPARTMENT NFPA 1901, 2016 edition, section 16.7.7 requires any 2.00" or larger discharge outlet that is located more than 42.00" off the ground and to which hose is to be connected and that is not in a hose storage area will be supplied with a sweep elbow of at least 30 degrees downward. NFPA 1901, 2016 edition, section 16.7.4 requires all discharge outlet connections, except connections to which a hose will be pre -connected, will be equipped with caps or closures capable of withstanding a hydrostatic gauge pressure of 100 psi over the maximum pump close -off pressure or 500 psi, whichever is greater. The elbow(s) and cap are not on the apparatus as manufactured. The fire department will provide the elbow(s) and cap. REAR OUTLET ELBOWS PROVIDED BY FIRE DEPARTMENT NFPA 1901, 2016 edition, section 16.7.7 requires any 2.00" or larger discharge outlet that is located more than 42.00" off the ground and to which hose is to be connected and that is not in a hose storage area will be supplied with a sweep elbow of at least 30 degrees downward. NFPA 1901, 2016 edition, section 16.7.4 requires all discharge outlet connections, except connections to which a hose will be pre -connected, will be equipped with caps or closures capable of withstanding a hydrostatic gauge pressure of 100 psi over the maximum pump close -off pressure or 500 psi, whichever is greater. The elbow(s) and cap are not on the apparatus as manufactured. The fire department will provide the elbow(s) and cap. REDUCER There will be two (2) adapters with 2.50" FNST x 1.50" MNST threads and a 1.50" chrome plated cap installed on side outlets. 59 of 78 SPECIFICATIONS DISCHARGE OUTLET CONTROLS The discharge outlets will incorporate a quarter -turn ball valve with the control located at the valve. The valve operating mechanism (handle) will indicate the position (open/closed) of the valve. DEADLAY HOSE BEDS One (1) deadlay bed, without plumbing, will be provided above the pump compartment capable of carrying 250ft. The center crosslay dividers will be fabricated of .25" aluminum and will provide adjustment from side to side. The divider will be unpainted with a DA finish. Stainless steel vertical scuffplates will be provided at hose bed ends (each side of vehicle). Bottom of hose bed ends (each side) will also be equipped with a stainless steel scuffplate. Deadlay bed flooring will consist of removable perforated brushed aluminum. HOSE RESTRAINT SIDES One (1) end skirt made of Serge Ferrari flame retardant material will be provided on each side of the cross lay/speed lay/dead lay hose beds to secure the hose during travel. Each end skirt will be a single piece with seat belt buckle style latches at the top and Velcro strap pull releases at the bottom. The Velcro straps will be approximately 9.00" in length. Color will be black CROSSLAYlDEADLAY HOSE RESTRAINT An aluminum treadplate cover, hinged at the back will be installed over the top of the crosslay/deadlay(s). It will include a latch at each end of the cover to hold it securely in place, a chrome grab handle at each end for opening and closing the cover and a foam rubber gasket where the cover comes into contact to a painted surface. The cover will be provided with no stay arm device hold open device. CROSSLAY 9.00" LOWER THAN STD The crosslays will be lowered 9.00" from standard. BOOSTER HOSE REELS Two (2) Hannay electric rewind booster hose reels will be installed over the pump in a recessed open compartment, one each side. The exterior finish of the reel will be painted job color matching the body exterior. A polished stainless steel roller and guide assembly will be mounted on each side of the apparatus. 60 of 78 SPECIFICATIONS 8-75 Discharge controls will be provided at the pump operator's panel. Plumbing to the reels will consist of 2.00" plumbing and 2.00" valves. Reel motors shall be protected from overload with a circuit breaker rated to match the motors. Electric rewind control shall be two (2) rubber covered buttons, one (1) mounted on each pump panel adjacent to the hose reel. Capacity of the hose reel will be 150 feet of 1.00" booster hose. FOAM SYSTEM There will be a Hypro/Foam Pro, Model 1600, direct injection foam proportioning system furnished and installed on the apparatus. The system will be a single agent system suitable for handling Class "A" foam concentrate only. The foam system will be plumbed to five (5) discharges. The discharges capable of dispensing foam will be front, both reels. side discharges, rear discharge. The proportioning operation will be based on an accurate direct measurement of water flows with no water flow restriction. The foam system will be installed in accordance with the manufacturer recommendations. The system will be equipped with a control module. It will be installed on the pump operator's panel and enable the pump operator to perform the following functions: Activate the foam system. Change foam concentrate proportioning rates from .1 percent to 1 percent. Flash a low concentrate warning light when the foam concentrate tank runs low of concentrate and in two (2) minutes if foam concentrate is not added to tank shut the foam pump down. The foam system will have a 12volt, 1/3 hp electric motor driven positive displacement piston type foam concentrate pump with a rated capacity of 1.7 gpm @ 200 psi with a maximum operating pressure of 400 psi. A full flow check valve will be provided in the discharge piping to prevent foam contamination of the fire pump and water tank. A 5 psi opening pressure check valve will be installed in the concentrate line. The number of discharges supplied with foam will be five (5) discharges. The discharges will be front, both reels. side discharges, rear discharge. 61 of 78 SPECIFICATIONS Uwe FOAM TANK The foam tank will be an integral portion of the polypropylene water tank. The cell will have a capacity of 30 gallons of foam with the intended use of Class A foam. The foam cell will not reduce the capacity of the water tank. The foam cell will have a screen in the fill dome and a breather in the lid. FOAM TANK DRAIN The foam tank drain will be a 1.00" drain valve located inside the pump compartment accessible through a door on the right side pump panel. PUMP COMPARTMENT The pump compartment will be separate from the hose body and compartments so that each may flex independently of the other. It will be a fabricated assembly of steel tubing, angles and channels which supports both the fire pump and the side running boards The pump compartment will be mounted on the chassis frame rails with rubber biscuits in a four point pattern to allow for chassis frame twist. Pump compartment, pump, plumbing and gauge panels will be removable from the chassis in a single assembly. PUMP MOUNTING Pump will be mounted to a substructure which will be mounted to the chassis frame rail using rubber isolators. The mounting will allow chassis frame rails to flex independently without damage to the fire pump. PUMP CONTROL PANELS (SIDE CONTROL) All pump controls and gauges will be located at the left side of the apparatus and properly marked. The pump panel on the right side will be removable with lift and turn type fasteners. The left side will be fastened with screws. The control panels will be 34.00" wide. The gauge and control panels will be two (2) separate panels for ease of maintenance. Polished stainless steel trim collars will be installed around all inlets and outlets. All push/pull valve controls will have 1/4 turn locking control rods with polished chrome plated zinc tee handles. Guides for the push/pull control rods will be chrome plated zinc castings securely mounted to the pump panel. Push/pull valve controls will be capable of locking in any position. The control rods will pull straight out of the panel and will be equipped with universal joints to eliminate binding. 62 of 78 SPECIFICATIONS 8-77 All line pressure gauges will be mounted in individual chrome plated castings with the identification tag recessed in the casting below the gauge. All remaining identification tags will be mounted on the pump panel in chrome plated bezels. Mounting of the castings and identification bezels will be done with a threaded peg cast on the back side of the bezel or screws. PUMP PANEL CONFIGURATION The pump panel configuration will be neat and orderly. PUMP AND GAUGE PANEL The pump and gauge panels will be constructed of stainless steel with a brushed finish. A polished aluminum trim molding will be provided on both sides of the pump panel. The right side pump panel will be removable and fastened with swell type fasteners. PUMP COMPARTMENT LIGHTING There will be one (1) Truck -Lite, Model 44308C 4.00" white LED light(s) with Model 40700 grommet provided inside the pump enclosure for pump compartment lighting. The light(s) will be controlled by a switch located front facing center. PUMP PANEL GAUGES AND CONTROLS The following will be provided on the pump and gauge panels in a neat and orderly fashion- - Class 1 Enfo 4 System: With LED display of the engine oil pressure, engine temperature and engine rpm. A warning alarm will be provided for these items. - Tachometer: Electric - Voltmeter Also provided at the pump panel will be the following - Master Pump Drain Control INFINITY PRO THROTTLE A Fire Research model ET4000 series electronic remote throttle designed for modern fire fighting apparatus will be provided on the pump operator panel. The throttle will have an "Optical Eye" idle button which immediately returns the engine to idle when pushed. THROTTLE READY GREEN INDICATOR LIGHT There will be a green indicator light with label installed on the pump operators panel that is activated when the pump is in Throttle Ready mode. 63 of 78 SPECIFICATIONS s OK TO PUMP INDICATOR LIGHT There will be a green indicator light installed on the pump operators panel that is activated when the pump is in Ok To Pump mode. COMPARTMENT, PUMP PANEL A compartment will be installed on the right side pump panel for storage of long handle tools, this compartment will be identified as "RSY on the sales drawing. The compartment will be bolt in construction to allow removal for pump access also the interior rear (pump side) wall will be removable for pump access along with two (2) hinged stainless steel door for access without removing the rear wall and or compartment it self.The hinge for the two (2) access doors will be located on the rear side of the compartment and the doors will have two (2) flush mounted pawl latches for each door.Design to match 29679TR The compartment exterior door construction will match the double pan compartment doors. One (1) D -ring slam latch will be provided. The compartment will be approximately 60.00" high (interior) x 15.00" wide (interior) x 12.00" deep. VACUUM AND PRESSURE GAUGES The pump vacuum and pressure gauges will be liquid filled and manufactured by Class 1 Incorporated ©. The gauges will be a minimum of 4.00" in diameter and will have white faces with black lettering, with a pressure range of 30.00"-0-600#. Gauge construction will include a Zytel nylon case with adhesive mounting gasket and threaded retaining nut. The pump pressure and vacuum gauges will be installed adjacent to each other at the pump operator's control panel. Test port connections will be provided at the pump operator's panel. One will be connected to the intake side of the pump, and the other to the discharge manifold of the pump. They will have 0.25 in. standard pipe thread connections and non -corrosive polished stainless steel or brass plugs. They will be marked with a label. This gauge will include a 10 year warranty against leakage, pointer defect, and defective bourdon tube. WATER LEVEL GAUGE A Fire Research TankVision Pro model WLA300-A00 water tank indicator gauge will be installed on the pump operators panel. The gauge kit will include an electronic indicator module, a pressure sensor, and a 10' sensor cable. The gauge will show the volume of water 64 of 78 SPECIFICATIONS • in the tank on nine (9) easy to see super bright RGB LEDs. A wide view lens over the LEDs will provide for a viewing angle of 180 degrees. The gauge case will be waterproof, manufactured of Polycarbonate/Nylon material, and have a distinctive blue label. The program features will be accessed from the front of the indicator module. The program will support self -diagnostics capabilities, self -calibration, six (6) programmable colored light patterns to display tank volume, adjustable brightness control levels and a data link to connect remote indicators. Low water warnings will include flashing LEDs at 1/4 tank and down chasing LEDs when the tank is almost empty. The gauge will receive an input signal from an electronic pressure sensor. The sensor will be mounted from the outside of the water tank near the bottom. No probe will be placed on the interior of the tank. Wiring will be weather resistant and have automotive type plug-in connectors. MINI SLAVE UNIT A Fire Research TankVision model WLA205-A00 miniature tank indicator gauge will be installed in the cab. The indicator gauge will show the volume of water in the tank on five (5) easy to see super bright LEDs. A wide view lens over the LEDs will provide for a viewing angle of 180 degrees. The indicator gauge case will be manufactured of Polycarbonate material with an integrated lens and have a distinctive blue label. WATER LEVEL GAUGE There will be two (2) additional water level indicator, Wheleno, Model PSTANK2, LED module with chrome flange installed one (1) each side, forward and up high on the body side sheet. This light module will include four (4) colored levels, and function similar to the water level indicator located at the operators panel: • First green module indicates a full water level • Second blue module indicates a water level above 3/4 full • Third amber module indicates a water level above 1/2 full • Last red module indicates a water level above 1/4 full and empty o Above 1/4 this light will be steady burning o At empty this light will be flashing This module will be activated when the pump is in gear. CLASS "A" FOAM LEVEL GAUGE A Fire Research TankVision Pro model WLA360-A00 cell/tank level indicator kit shall be installed on the pump operators panel. The kit will include an electronic indicator module, a pressure sensor, a 10' sensor cable and a tank vent. The indicator will show the volume of Class "A" foam concentrate in the cell/tank on nine (9) easy to see super bright RGB LEDs. A 65 of 78 SPECIFICATIONS :m wide view lens over the LEDs will provide for a viewing angle of 180 degrees. The indicator case will be waterproof, manufactured of Polycarbonate/Nylon material and have a distinctive green label. The program features will be accessed from the front of the indicator module. The program will support self -diagnostics capabilities, self -calibration, six (6) programmable colored light patterns to display cell/tank volume, adjustable brightness control levels and a data link to connect remote indicators. Low foam level warnings will include flashing LEDs at 1/4 cell/tank and down chasing LEDs when the cell/tank is almost empty. The indicator will receive an input signal from an electronic pressure sensor. The sensor will be mounted from the outside of the foam cell/tank near the bottom. No probe will be placed on the interior of the cell/tank. Wiring will be weather resistant and have automotive type plug-in connectors. LIGHT SHIELD There will be a polished, 16 gauge stainless steel light shield installed over the pump operators panel. There will be four (4) Fire Research, Firefly part number LED115-Q01, 12 volt DC white LED lights installed under the stainless steel light shield to illuminate the controls, switches, essential instructions, gauges, and instruments necessary for the operation of the apparatus. These lights will be activated by the pump panel light switch. Additional lights will be included every 18.00" depending on the size of the pump house. One (1) pump panel light will come on when the pump is in ok to pump mode. The remaining lights to be actuated from a switch located on the pump panel. There will be a light activated above the pump panel light switch when the parking brake is set. This is to afford the operator some illumination when first approaching the control panel. AIR HORN SYSTEM Two (2) Grover air horns will be provided and located one (1) each side of the engine. The horn system will be piped to the air brake system wet tank utilizing 0.38" tubing. A pressure protection valve will be installed in-line to prevent the loss of air, in the air brake system. Air Horn(s) Location The air horn(s) location will be on the side of the engine hood. AIR HORN CONTROL The air horns will be actuated by a chrome push button located on the officer's side of the engine tunnel and by the horn button in the steering wheel. The driver will have the option to control the air horns or the chassis horns from the horn button by means of a selector switch located on the instrument panel. 66 of 78 SPECIFICATIONS ELECTRONIC SIREN A Whelen, Model: 295SLSA1, electronic siren with noise canceling microphone will be provided. This siren to be active when the battery switch is on and that emergency master switch is on. NFPA 1901, 2016 edition, Section 13.9.1.1 requires the siren manufacturer to certify the siren as meeting the requirements of SAE J1849, Emergency Vehicle Sirens. Per the fire department specification, the siren and siren speaker come from separate manufacturers and a certification is therefore invalid. The apparatus will be non compliant to NFPA 1901 standards at time of contract execution. Siren head will be located near the overhead switches. The electronic siren will be controlled on the siren head only. No horn button or foot switches will be provided. SPEAKER There will be one (1) Cast Products, Model SA2403, 100 watt, inside -the -bumper mount with trim bezel speaker provided. The speaker will be connected to the siren amplifier. The speaker(s) will be recessed in the center of the front bumper. FRONT ZONE UPPER WARNING LIGHTS There will be one (1) 72.00" Whelen® Freedom TM IV LED lightbar mounted on the cab roof. The lightbar will include the following: • One (1) red flashing LED module in the left side end position. • One (1) red flashing LED module in the left side front corner position. • One (1) red flashing LED module in the left side first front position. • One (1) red flashing LED module in the left side second front position. • One (1) white flashing LED module in the left side third front position. • One (1) red steady burn LED module in the left side fourth front position. • One (1) red flashing LED module in the left side fifth front position. • One (1) 795 LED traffic light controller sent to national standard high priority in the center positions. • One (1) red flashing LED module in the right side fifth front position. • One (1) red steady burn LED module in the right side fourth front position. • One (1) white flashing LED module in the right side third front position. • One (1) red flashing LED module in the right side second front position. • One (1) red flashing LED module in the right side first front position. 67 of 78 SPECIFICATIONS • One (1) red flashing LED module in the right side front corner position. • One (1) red flashing LED module in the right side end position. There will be clear lenses included on the lightbar. The following switches may be installed in the cab on the switch panel to control the lightbar: • a switch to control the flashing LED modules. • the traffic light controller by a cab switch with emergency master control. • no momentary switch to activate the traffic light controller. The two (2) white flashing LED modules and the traffic light controller will be disabled when the parking brake is applied. FRONT WARNING LIGHT There will be two (2) Whelen, Model M6** LED flashing lights provided at the front of the truck. The driver's side front warning light to be red. The passenger's side front warning light to be red. The color of the lenses will be the same color as the LED's. The lights will be mounted with with a flange. The lights will be activated by a switch on the cab instrument panel. HEADLIGHT FLASHER The high beam headlights will flash alternately between the left and right side. There will be a switch installed in the cab on the switch panel to control the high beam flash. This switch will be live when the battery switch and the emergency master switches are on. The flashing will automatically cancel when the hi -beam headlight switch is activated or when the parking brake is set. SIDE ZONE LOWER LIGHTING There will be six (6) Whelen@, Model M6**, 4.31" high x 6.75" long x 1.37" deep flashing LED warning lights with chrome trim installed per the following: • Two (2) lights located, one (1) each side on the bumper extension. The driver's side, side front light to include red warning LEDs and the passenger's side, side front light to include red warning LEDs. • Two (2) lights located, one (1) each side under the cab doors. The driver's side, side middle light to include red warning LEDs and the passenger's side, side middle light to include red warning LEDs. 68 of 78 SPECIFICATIONS :: • Two (2) lights located, one (1) each side above rear wheels. The driver's side, side rear light to include red warning LEDs and the passenger's side, side rear light to include red warning LEDs. • The warning light lens colors to be the same as the LEDs. There will be a switch in the cab on the switch panel to control the lights. SIDE WARNING LIGHTS There will be two (2) Whelen, Model M6* LED flashing warning light(s) with bezel(s) provided each side upper front side of body. The color of the lights will be red. All of these lights will include a lens color that is the same as the LED's These lights will be activated with the Side Zone Lower warning lights. REAR ZONE LOWER LIGHTING There will be two (2) Whelen@, Model M6*, LED flashing warning lights will be located at the rear of the apparatus. • The driver's side rear light to be red • The passenger's side rear light to be red Both lights will include a lens that is the same color as the LED's. There will be a switch located in the cab on the switch panel to control the lights. REAR WARNING LIGHTS There will be two (2) Whelen@, Model M6**, 4.31" high x 6.75" wide x 1.37" deep flashing LED warning light(s) with chrome trim provided at the rear of the apparatus, one each side high on body below M6 lights. The light(s) to include red flashing LEDs. The warning light lens colors to be the same as the LEDs. These light(s) will be controlled with the rear upper warning switch. The light(s) may be load managed when the parking brake is applied. WARNING LIGHTS (REAR AND SIDE UPPER ZONES) Four (4) Whelen, model M6* LED flashing warning lights will be provided at the rear of the apparatus with Whelen, 6EFLANGE chrome flanges. The side rear upper light(s) on the driver's side to be red. 69 of 78 SPECIFICATIONS wo The rear upper light(s) on the driver's side to be red. The rear upper light(s) on the passenger's side to be red. The side rear upper light(s) on the passenger's side to be red. These lights will include a lens that is the same color as the LED's. There will be a switch located in the cab on the switch panel to control the lights. REAR LIGHT MOUNTING The rear warning lights will be mounted on the rear side sheet flange and rear bulkhead of the body as high as possible with all wiring totally enclosed. LOOSE EQUIPMENT The following equipment will be furnished with the completed unit: - One (1) bag of chrome, stainless steel, or cadmium plated screws, nuts, bolts and washers, as used in the construction of the unit. NFPA REQUIRED LOOSE EQUIPMENT PROVIDED BY FIRE DEPARTMENT The following loose equipment as outlined in NFPA 1901, 2016 edition, section 5.9.3 and 5.9.4 will be provided by the fire department. • 800 ft (60 m) of 2.50" (65 mm) or larger fire hose. • 400 ft (120 m) of 1.50" (38 mm), 1.75" (45 mm), or 2.00" (52 mm) fire hose. • One (1) handline nozzle, 200 gpm (750 L/min) minimum. • Two (2) handline nozzles, 95 gpm (360 L/min) minimum. • One (1) smoothbore of combination nozzle with 2.50" shutoff that flows a minimum of 250 gpm. • One (1) SCBA complying with NFPA 1981 for each assigned seating position, but not fewer than four (4), mounted in brackets fastened to the apparatus or stored in containers supplied by the SCBA manufacturer. • One (1) spare SCBA cylinder for each SCBA carried, each mounted in a bracket fastened to the apparatus or stored in a specially designed storage space(s). • One (1) first aid kit. • Four (4) combination spanner wrenches. • Two (2) hydrant wrenches. • One (1) double female 2.50" (65 mm) adapter with National Hose threads. • One (1) double male 2.50" (65 mm) adapter with National Hose threads. • One (1) rubber mallet, for use on suction hose connections. Two (2) salvage covers each a minimum size of 12 ft x 14 ft (3.7 m x 4.3 m). 70 of 78 SPECIFICATIONS • One (1) traffic vest for each seating position, each vest to comply with ANSVISEA 207, Standard for High Visibility Public Safety Vests, and have a five -point breakaway feature that includes two (2) at the shoulders, two (2) at the sides, and one (1) at the front. • Five (5) fluorescent orange traffic cones not less than 28.00" (711 mm) in height, each equipped with a 6.00" (152 mm) retro -reflective white band no more than 4.00" (152 mm) from the top of the cone, and an additional 4.00" (102 mm) retro -reflective white band 2.00" (51 mm) below the 6.00" (152 mm) band. • Five (5) illuminated warning devices such as highway flares, unless the five (5) fluorescent orange traffic cones have illuminating capabilities. • One (1) automatic external defibrillator (AED). • Four (4) ladder belts meeting the requirements of NFPA 1983, Standard on Fire Service Life Safety Rope and System Components (if equipped with an aerial device). • If the supply hose carried does not use sexless couplings, an additional double female adapter and double male adapter, sized to fit the supply hose carried, will be carried mounted in brackets fastened to the apparatus. • If none of the pump intakes are valved, a hose appliance that is equipped with one or more gated intakes with female swivel connection(s) compatible with the supply hose used on one side and a swivel connection with pump intake threads on the other side will be carried. Any intake connection larger than 3.00" (75 mm) will include a pressure relief device that meets the requirements of 16.6.6. • If the apparatus does not have a 2.50" National Hose (NH) intake, an adapter from 2.50" NH female to a pump intake will be carried, mounted in a bracket fastened to the apparatus if not already mounted directly to the intake. • If the supply hose carried has other than 2.50" National Hose (NH) threads, adapters will be carried to allow feeding the supply hose from a 2.50" NH thread male discharge and to allow the hose to connect to a 2.50" NH female intake, mounted in brackets fastened to the apparatus if not already mounted directly to the discharge or intake. SOFT SUCTION HOSE There will be no soft suction hose provided. STRAINER PROVIDED BY FIRE DEPARTMENT NFPA 1901, 2016 edition, section 5.8.2.1.1 requires a suction strainer when suction hose is provided. The strainer is not on the apparatus as manufactured. The fire department will provide the suction strainer. DRY CHEMICAL EXTINGUISHER PROVIDED BY FIRE DEPARTMENT NFPA 1901, 2016 edition, section 5.9.4 requires one (1) approved dry chemical portable fire extinguisher with a minimum 80 -B -C rating mounted in a bracket fastened to the apparatus. 71 of 78 SPECIFICATIONS ::. The extinguisher is not on the apparatus as manufactured. The fire department will provide and mount the extinguisher. WATER EXTINGUISHER PROVIDED BY FIRE DEPARTMENT NFPA 1901, 2016 edition, section 5.9.4 requires one (1) 2.5 gallon or larger water extinguisher mounted in a bracket fastened to the apparatus. The extinguisher is not on the apparatus as manufactured. The fire department will provide and mount the extinguisher. FLATHEAD AXE PROVIDED BY FIRE DEPARTMENT NFPA 1901, 2016 edition, Section 5.9.4 requires one (1) flathead axe mounted in a bracket fastened to the apparatus. The axe is not on the apparatus as manufactured. The fire department will provide and mount the axe. PICKHEAD AXE PROVIDED BY FIRE DEPARTMENT NFPA 1901, 2016 edition, Section 5.9.4 requires one (1) pickhead axe mounted in a bracket fastened to the apparatus. The axe is not on the apparatus as manufactured. The fire department will provide and mount the axe. PAINT PROCESS The exterior custom cab and/or body painting procedure will consist of a seven (7) step finishing process. A commercial chassis paint process will follow similar processes as determined by the chassis manufacturer. The following procedure will be used by Pierce - 1 . ierce:1. Manual Surface Preparation - All exposed metal surfaces on the custom cab and body will be thoroughly cleaned and prepared for painting. Imperfections on the exterior surfaces will be removed and sanded to a smooth finish. Exterior seams will be sealed before painting. Exterior surfaces that will not be painted include; chrome plating, polished stainless steel, anodized aluminum and bright aluminum treadplate. 2. Chemical Cleaning and Pretreatment - All surfaces will be chemically cleaned to remove dirt, oil, grease, and metal oxides to ensure the subsequent coatings bond well. The aluminum surfaces will be properly cleaned and treated using a high pressure, high temperature 4 step Acid Etch process. The steel and stainless surfaces will be properly cleaned and treated using a high temperature 3 step process specifically designed for steel or stainless. The chemical treatment converts the metal surface to a passive condition to help prevent corrosion. A final pure water rinse will be applied to all metal surfaces. 72 of 78 SPECIFICATIONS ;: 3. Surfacer Primer - The Surfacer Primer will be applied to a chemically treated metal surface to provide a strong corrosion protective base coat. A minimum thickness of 2 mils of Surfacer Primer is applied to surfaces that require a critical aesthetic finish. The surfacer primer will be a two -component high solids urethane that has excellent sanding properties and an extra smooth finish when sanded. 4. Finish Sandinq - The surfacer primer will be sanded with a fine grit abrasive to achieve an ultra -smooth finish. This sanding process is critical to produce the smooth mirror like finish in the topcoat. 5. Sealer Primer - The sealer primer is applied prior to the base coat in all areas that have not been previously primed with the surfacer primer. The sealer primer is a two - component high solids urethane that goes on smooth and provides excellent gloss hold out when top coated. 6. Base coat Paint - Two coats of a high performance, two component high solids polyurethane base coat will be applied. The Base coat will be applied to a thickness that will achieve the proper color match. The Base coat will be used in conjunction with a urethane clear coat to provide protection from the environment. 7. Clear Coat - Two (2) coats of clear coat will be applied over the base coat color. The clear coat is a two -component high solids urethane that provides superior gloss and durability to the exterior surfaces. Lap style doors will be clear coated to match the body. Paint warranty for the roll -up doors will be provided by the roll -up door manufacturer. Our specifications are written to define cyclic corrosion testing, physical strengths, durability and minimum appearance requirements must be met in order for an exterior paint finish to be considered acceptable as a quality finish. Each batch of base coat color will be checked for a proper match before painting of the cab and the body. After the cab and body are painted, the color is verified again to make sure that it matches the color standard. Electronic color measuring equipment will be used to compare the color sample to the color standard entered into the computer. Color specifications are used to determine the color match. A Delta E reading will be used to determine a good color match within each family color. All removable items such as brackets, compartment doors, door hinges, and trim will be removed and separately if required, to ensure paint behind all mounted items. Body assemblies that cannot be finish painted after assembly will be finish painted before assembly. PAINT - ENVIRONMENTAL IMPACT Contractor will meet or exceed all current State regulations concerning paint operations. Pollution control will include measures to protect the atmosphere, water and soil. Controls will include the following conditions: 73 of 78 SPECIFICATIONS 91m: • Topcoats and primers will be chrome and lead free. • Metal treatment chemicals will be chrome free. The wastewater generated in the metal treatment process will be treated on-site to remove any other heavy metals. • Particulate emission collection from sanding operations will have a 99.99% efficiency factor. • Particulate emissions from painting operations will be collected by a dry filter or water wash process. If the dry filter is used, it will have an efficiency rating of 98.00%. Water wash systems will be 99.97% efficient • Water from water wash booths will be reused. Solids will be removed on a continual basis to keep the water clean. • Paint wastes will be disposed of in an environmentally safe manner. • Empty metal paint containers will be recycled to recover the metal. • Solvents used in clean-up operations will be recycled on-site or sent off-site for distillation and returned for reuse. Additionally, the finished apparatus will not be manufactured with or contain products that have ozone depleting substances. Pierce will, upon demand, present evidence that the manufacturing facility meets the above conditions and that it is in compliance with the state EPA rules and regulations. PAINT To ensure a perfect color match between the body and chassis, the apparatus manufacturer will also repaint the commercial chassis cab. The apparatus will be painted red 107. COMMERCIAL CHASSIS REPAINT In order to assure a perfect match between the chassis cab and the rest of the apparatus, or to provide the specified color not typically available from a commercial chassis manufacturer, the chassis cab will be repainted by the apparatus manufacturer. Since it is not practical to repaint certain areas of the cab such as the fire wall, radiator core support, or bottom of the cab, the best results will be obtained by ordering the commercial chassis painted a neutral color. PAINT CHASSIS FRAME ASSEMBLY The chassis frame assembly shall be painted black by the chassis manufacturer. It shall remain the commercial grade finish as provided. TRANSIT COATING All non -painted metal surfaces on the exterior of the vehicle will be sprayed with a corrosion protective coating provided by Carwell. The coating can be removed with soap and water. The coating is made of a linseed oil base and is biodegradable. 74 of 78 SPECIFICATIONS ::• The underside non -painted metal surfaces will also be coated with a corrosion protective coating. COMPARTMENT INTERIOR PAINT The interior of all compartments will be painted with a gray spatter finish for ease of cleaning and to make it easier to touch up scratches and nicks. REFLECTIVE BAND A 6.00" white reflective band will be provided across the front of the vehicle and along the sides of the body. REFLECTIVE VINYL ON FRONT BUMPER There will be a reflective vinyl band provided across the front bumper. REAR CHEVRON STRIPING There will be alternating chevron striping located on the rear -facing vertical surface of the apparatus. The rear surface, excluding the rear compartment door, will be covered. The colors will be alternating ruby red and yellowreflective. Each stripe will be 6.00" in width. This will meet the requirements of the current edition of NFPA 1901, which states that 50% of the rear surface will be covered with chevron striping. JOG(S) IN REFLECTIVE BAND The reflective band located on each side of the apparatus body will contain one (1) jog(s) and will be angled at approximately a 45 degrees when installed. OUTLINE, REFLECTIVE STRIPE A Black outline will be applied on the top and the bottom of the reflective band. There will be two (2) set of outline stripes required. CAB DOORS REFLECTIVE STRIPE A white reflective stripe will be provided on the interior of each cab door. This stripe will be a minimum of 96.00 square inches and will meet the NFPA 1901 requirement. LETTERING The lettering will be totally encapsulated between two (2) layers of clear vinyl. LETTERING Twenty-one (21) to forty (40) genuine gold leaf lettering, 3.00" high, with outline and double shade will be provided. 75 of 78 SPECIFICATIONS •8 I FTTFRING There will be reflective lettering, 10.00" high, with no outline or shade provided. There will be four (4) letters provided. I FTTFRING. There will be reflective lettering, 5.00" high, with no outline or shade provided. There will be seven (7) letters provided. LETTERING There will be reflective lettering, 6.00" high, with no outline or shade provided. There will be ten (10) letters provided. I FTTFRING, There will be reflective lettering, 18.00" high, with no outline or shade provided. There will be four (4) letters provided. MALTESE CROSS INSTALLATION There will be one (1) pair of maltese crosses, comprised of genuine gold leaf material, provided and installed front cab doors. MANUAL, BODY PARTS ONLY Two (2) custom parts manuals for the Pierce@ installed parts only will be provided in hard copy as well as on compact disc with the completed unit. The manual will contain the following: - Job number - Part numbers with full descriptions - Table of contents Parts section sorted in functional groups reflecting a major system, component, or assembly Parts section sorted in Alphabetical order Instructions on how to locate parts The manual will be specifically written for the body model being purchased. It will not be a generic manual for a multitude of different bodies. SERVICE PARTS INTERNET SITE The service parts information included in this manual are also available on the Pierce website. The website offers additional functions and features not contained in this manual, such as digital photographs and line drawings of select items. The website also features electronic search tools to assist in locating parts quickly. 76 of 78 SPECIFICATIONS WE ANUALS. SERVICE Two (2) service manual supplements containing parts and service information on Pierce@) installed components will be provided with the completed unit. The manual will be specifically written for the unit being purchased. It will not be a generic manual for a multitude of different units. MANUAL, CHASSIS OPERATION One (1) chassis operation manual will be provided with the completed unit. ONE (1) YEAR MATERIAL AND WORKMANSHIP Each new piece of apparatus will be provided with a minimum one (1) year basic apparatus material and workmanship limited warranty. The warranty will cover such portions of the apparatus built by the manufacturer as being free from defects in material and workmanship that would arise under normal use and service. A copy of the warranty certificate will be submitted with the bid package. CHASSIS WARRANTY The chassis manufacturer will provide a three (3) year or 100,000 mile warranty. TEN (10) YEAR PRO -RATED PAINT AND CORROSION A Pierce cab limited pro -rated paint warranty certificate, WA0055, is included with this proposal. COMPARTMENT LIGHT WARRANTY The Pierce 12 volt DC LED strip lights limited warranty certificate, WA0203, is included with this proposal. TRANSMISSION WARRANTY The transmission will have a five (5) yearlunlimited mileage warranty covering 100 percent parts and labor. The warranty to be provided by Allison Transmission and not apparatus builder. WATER TANK WARRANTY A UPF poly water tank limited warranty certificate, WA0195, is included with this proposal. TEN (10) YEAR STRUCTURAL INTEGRITY The Pierce apparatus body limited warranty certificate, WA0009, is included with this proposal. PUMP WARRANTY A Darley pump limited warranty certificate, WA0179, is included with this proposal. 77 of 78 SPECIFICATIONS TEN (10) YEAR PUMP PLUMBING WARRANTY The Pierce apparatus plumbing limited warranty certificate, WA0035, is included with this proposal. 12 YEAR PRO -RATED PAINT AND CORROSION A Pierce stainless steel body limited pro -rated paint warranty certificate, WA0058, is included with this proposal THREE (3) YEAR MATERIAL AND WORKMANSHIP The Pierce Goldstar gold leaf lamination limited warranty limited warranty certificate, WA0018, is included with this proposal. VEHICLE STABILITY CERTIFICATION The fire apparatus manufacturer will provide a certification stating the apparatus complies with NFPA 1901, current edition, section 4.13, Vehicle Stability. The certification will be provided at the time of bid. CAB INTEGRITY The cab has been tested to and passed the following standards: - ECE Regulation No.29 - SAE J2422 Cab Roof Strength Evaluation - Quasi -Static Loading Heavy Trucks. AMP DRAW REPORT The bidder will provide, at the time of bid and delivery, an itemized print out of the expected amp draw of the entire vehicle's electrical system. The manufacturer of the apparatus will provide the following: • Documentation of the electrical system performance tests. • A written load analysis, which will include the following: o The nameplate rating of the alternator. o The alternator rating under the conditions specified per: ■ Applicable NFPA 1901 or 1906 (Current Edition). o The minimum continuous load of each component that is specified per: ■ Applicable NFPA 1901 or 1906 (Current Edition). o Additional loads that, when added to the minimum continuous load, determine the total connected load. o Each individual intermittent load. All of the above listed items will be provided by the bidder per the applicable NFPA 1901 or 1906 (Current Edition). 78 of 78 SPECIFICATIONS EXHIBIT B PRICING PROPOSAL [See attached] South Coast Fire Equipment Inc. Page B-1 PROPOSAL FOR FURNISHING FIRE APPARATUS January 17, 2020 1 Newport Beach Fire Department SOUT OAST 100 Civic Center Drive Newport Beach, CA 92658 The undersigned is prepared to provide for you, our customer, upon an order being placed by you, for final acceptance by South Coast Fire Equipment, Inc., at its corporate office in Ontario. California, the apparatus and equipment herein named and for the following prices: PLEASE NOTE THE FOLLOWING ABOUT THIS QUOTATION: Payment options are available and are included under separate cover. One of these options may save your department a significant amount of moneylPRICE VALID UNTIL MARCH 31,2020 Said apparatus and equipment are to be built by the manfacturer and shipped in accordance with the specifications hereto attached, delays due to strikes, war or international conflict, failures to obtain chassis, materials, or other causes beyond our control not preventing, within about 420-450 calender days after receipt of this order and the acceptance thereof at our office in Ontario, California, and to be delivered to you at Newport Beach, CA The specifications herein contained shall form a part of the final contract and are subject to changes desired by the purchaser. provided such alterations are interlined prior to the acceptance by the company of the order to purchase, and provided such alterations do not materially affect the cost of the construction of the apparatus. The proposal for fire apparatus conforms with all Federal Department of Transportation (DOT) rules and regulations in effect at the time of bid, and with all National Fire Protection Association (NFPA) guidelines for Automotive Fire Apparatus as published at time of bid, except as modified by customer specifications. Any increased costs incurred by the first party because of future changes in or additions to said DOT or NFPA standards will be passed along to the customer as an addition to the price set forth above_ Unless accepted within 30 days from the specified date, the right is reserved to withdraw this proposition. Respectfully Submitted, South ast Fire Equi ment ne. 7 V/ Ke n Newell Sales Representative 8-95 Each Extension One ( 1 ) Pierce Type 3 Wildland Interface Pumper mounted on a Freightliner Chassis for a delivered sum of $ 485,028.16 $ 485,028.16 Sales Tax @ 7.750% $ 37,589.68 1 $ 37,589.68 APPARATUS COST WITH TAX $ 522,617.84 $ 522,617.84 Performance Bond Not Required 0.00 $ _ California Tire Fee $ 10.50 $ 10.50 TOTAL. PURCHASE PRICE $ 522,628.34 $ 522,628.34 PLEASE NOTE THE FOLLOWING ABOUT THIS QUOTATION: Payment options are available and are included under separate cover. One of these options may save your department a significant amount of moneylPRICE VALID UNTIL MARCH 31,2020 Said apparatus and equipment are to be built by the manfacturer and shipped in accordance with the specifications hereto attached, delays due to strikes, war or international conflict, failures to obtain chassis, materials, or other causes beyond our control not preventing, within about 420-450 calender days after receipt of this order and the acceptance thereof at our office in Ontario, California, and to be delivered to you at Newport Beach, CA The specifications herein contained shall form a part of the final contract and are subject to changes desired by the purchaser. provided such alterations are interlined prior to the acceptance by the company of the order to purchase, and provided such alterations do not materially affect the cost of the construction of the apparatus. The proposal for fire apparatus conforms with all Federal Department of Transportation (DOT) rules and regulations in effect at the time of bid, and with all National Fire Protection Association (NFPA) guidelines for Automotive Fire Apparatus as published at time of bid, except as modified by customer specifications. Any increased costs incurred by the first party because of future changes in or additions to said DOT or NFPA standards will be passed along to the customer as an addition to the price set forth above_ Unless accepted within 30 days from the specified date, the right is reserved to withdraw this proposition. Respectfully Submitted, South ast Fire Equi ment ne. 7 V/ Ke n Newell Sales Representative 8-95 souroAsr Newport Beach Fire Department 100% Pre -Payment Option January 17, 2020 If a 100% pre -payment were made at contract signing, the following discount would be applied to the final invoice: BALANCE DUE AT DELIVERY $0.00 $0.00 a) it your aepartment maKes a iuu°ia casn pre -payment at contract signing. b) If your department signs up for a lease -purchase with Pierce Financial Solutions. This would require no money down and no payments for one (1) year if desired. * Discount for the 100% pre -payment option includes discounts for the chassis, interest, aerial (if applicable), and flooring charges. " Any item added after this option is elected will come at additional cost and will be added to the final invoice. Each Extension One ( 1 ) Pierce Type 3 Wildland Interface Pumper mounted on a Freightliner Chassis for a delivered sum of $ 485,028.16 $ 485,028.16 100% Prepayment Discount $ (13,161.00) $ (13,161.00) APPARATUS COST $ 471,867.16 $ 471,867.16 Sates Tax @ 7.750% $ 36,569.70 $ 36,569.70 Performance Bond $ 1,455.08 $ 1,455.08 California Tire Fee $ 10.50 $ 10.50 TOTAL PREPAY PURCHASE PRICE $ 509,902.44 $ 509,902.44 Less 100% pre -payment at Contract Signing $ 509,902.44 1 $ 509,902.44 BALANCE DUE AT DELIVERY $0.00 $0.00 a) it your aepartment maKes a iuu°ia casn pre -payment at contract signing. b) If your department signs up for a lease -purchase with Pierce Financial Solutions. This would require no money down and no payments for one (1) year if desired. * Discount for the 100% pre -payment option includes discounts for the chassis, interest, aerial (if applicable), and flooring charges. " Any item added after this option is elected will come at additional cost and will be added to the final invoice. EXHIBIT C WARRANTY [See attached] South Coast Fire Equipment Inc. Page C-1 e,, Allison Rmsmission. NEW PRODUCT WARRANTY PARTICIPATING OEM SALES DISTRIBUTOR SALES LIMITED WARRANTY ON NEW ALLISON AUTOMATIC TRANSMISSIONS USED IN EMERGENCY VEHICLE APPLICATIONS Allison Transmission will provide for repairs or replacement, at its option. during the warranty period ofeach new Allison transmission listed below that is installed in an Emergency Vehicle in accordance with the following terms, conditions, and limitations. WHAT IS COVERED • WARRANTYAPPLIES —This warranty is for new Allison transmission models listed below installed in an Emergency Vehicle and is provided to the original and any subsequent owncr(s) ol'the vehicle during the warranty period. • REPAIRS COVERED —The warranty covers repairs or replacement, at Allison Transmission's option, to correct any transmission malfunction resulting from defects in material or workmanship occurring during the warranty period. Needed repairs or replacements will be performed using the method Allison 'transmission determines most appropriate under the circumstances. • TOWING —Towing is covered to the nearest Allison Transmission Distributor or authorized Dealer only when necessary to prevent further damage to your transmission. PAYMENT TER -NIS —Warranty repairs, including parts and labor, will be covered per the schedule shown in the chart contained in section "APPLICABLE MODELS, WARRANTY LIMITATIONS, AND ADJUSTMT?N'I' SCHEDt1LE." • OBTAINING REPAIRS —To obtain warranty repairs, take the vehicle to any Allison "Transmission Distributor or authorized Dealer %within a reasonable amount of time and request the needed repairs. A reasonable amount of time must be allowed for the Distributor or Dealer to perform necessary repairs_ • 'TRANSMISSION REMOVAL AND REINSTALLATION — Labor costs for the removal and re -installation of the transmission, when necessary to make a warranty repair, are covered by this warranty. • WARRANTY PERIOD —The warranty period for all coverages shall begin on the date the transmission is delivered to the first rot ,Ii I purchaser, with the following exception: Demonstration Service - A transmission in a new truck or bus may be demonstrated to a total of 5000 miles (8000 kilometcr�) If the vehicle is within this limit when sold to a retail purchaser, the warranty start date is the date ol-purchase. Normal warranty services are applicable to the demonstrating Dealer. Should the truck or bus be sold to a retail purchaser after these limits are reached, the warranty period will begin on the date the vehicle was first placed in demonstration service and the purchaser will be entitled to the remaining warranty. APPLICABLE MODELS, WARRANTY LIMITATIONS, AND ADJUSTMENT SCHEDULE Page l oft : •: WARRANTS' LIMITATIONS ADJUSTMENT CHARGE TO BE APPLICABLE Whichever occurs first PAID BY THE CUSTOMER Transmission Miles MODELS Months Or milometers Parts Lahor MT, MD 3000. 3200,3500,3700 0-24 No Limit No Charge No Cha HT with Hydraulic Controls 0-24 No Limit No Charge No Charge AT, 1000 SeriesTM, 2000 Series DA, 2400 SeriesT 0-35 No Limit No Charge No Charge HT with Electronic Controls 0-60 No Limit No Charge No Charge HD 1000 EVS, 2100 EVS, 2200 EVS 2350 EVS, 2500 EVS, 2550 EVS, 3000 EVS, 3500 EVS, 4000, 0-60 No Limit No Charge No Char,_,e 4000 EVS, 4500, 4500 EVS, 4700, 4700 EVS, 4800, 4800 EVS Page l oft : •: WHAT IS NOT COVERED • DAMAGE DUE TO ACCIDENT, MISUSE, or ALTERATION — Defects and damage caused as the result of any of the following are not covered: — Flood, collision, fire. theft, freezing. vandalism, riot, explosion. or objects striking the vehicle: — Misuse of the vehicle; — Installation into unapproved applications and installations; — Alterations or modification of the transmission or the vehicle, and Damage resulting from improper storage (refer to long-term storage procedure outlined in the applicable Allison Service Manual) Anything other than defects in Allison Transmission material or workmanship NOTE: '['his warranty is void on transmissions used in vehicles currently or previously titled as salvaged, scrapped, junked, or totaled. • CHASSIS, BODY, and COMPONENTS — The chassis and body company (assemblers) and other component and equipment manufacturers are solely responsible for warranties on the chassis, body, component(s), and equipment they provide. Any transmission repair caused by an alteration(s) made to the Allison transmission or die vehicle which allows the transmission to be installed or operated outside of the limits defined in the appropriate Allison Installation Guideline is solely the responsibility of the entity making the alteration($). • DAMAGE CAUSED by LACK of NIAINTEN:ANCE or by the USE of TRANSMISSION FLUIDS NOT RECONINIENDED in the OPERATOR'S MANUAL — Dciccts and damage caused by any of the following are not covered: — Failure to follow the recommendations of the maintenance schedule intervals applicable to the transmission, — Failure to use transmission fluids or maintain transmission fluid levels recommended in the Operator's Manual. • MAINTENANCE — Normal maintenance (such as replacement of filters. screens, and transmission fluid) is not covered and is the owner's responsibility. • REPAIRS by UNAUTHORIZED DEALERS — Defects and damage caused by a service outlet that is not an authorized Allison Transmission Distributor or Dealer are not covered. • USE of OTHER THAN GENUINE ALLISON TRANSMISSION PARTS — Defects and damage caused by the use of parts that are not genuine Allison "Transmission parts are not covered. • EXTRA EXPENSES — Economic loss and extra expenses are not covered. Examples include but are not limited to: loss of vehicle use; inconvenience; storage; payment for loss of time or pay; vehicle rental expense; lodging; meals; or other travel costs. • "DENIED PARTY" OWNERSHIP — Warranty repair parts and labor costs are not reimbursed to any participating or non -participating OEMs, dealers or distributors who perform warranty %kork for, or on behalf of end users identif icd by the United States as being a `denied party" or who are citizens of sanctioned or embargoed countries as defined by the U.S. Department of IYeasury Office of Foreign Assets Control. Furthermore, warranty reimbursements are not guaranteed if die reimbursement would be contrary to any United States export control laws or n:gularions its defined by the U.S. Department of Commerce. the U.S. Department of State, or die U.S. Department of Treasury. OTHER TERMS APPLICABLE TO CONSUMERS AS DEFINED by the MAGNUSON-MOSS WARRANTY ACT This warranty gives you specific legal rights and you may also have other rights which vary from state to state. Allison Transmission does not authorize any person to create for it any other obligation or liability in connection with these transmissions. ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE APPLICABLE TO THESE TRANSMISSIONS IS LIMITED IN DURATION TOT HE DURATION OF THIS WRITTEN WARRANTY. PERFORMANCE OF REPAIRS AND NEEDED ADJUSTMENTS IS THE EXCLUSIVE REMEDY UNDER THIS WRITTEN WARRANTY OR ANY IMPLIED WARRANTY. ALLISON TRANS'. -MISSION SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES (SUCH AS, BUT NOT LIMITED TO, LOSTWAGES OR VEHICLE RENTAL EXPENSES) RESULTING FROM BREACH OF THIS WRITTEN WARRANTY OR ANY IMPLIED WARRANTY.** ** Some states do not allow limitations on how long an implied warranty will last or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. OTHER TERMS APPLICABLE TO OTHER END-USERS THIS WARRANTY" IS THE ONI,Y WARRANTY APPLICABLE TO THE ALLISON'I'RANS:MISSION MODELS LISTED ABOVE AND IS EXPRESSLY I N'LIEV OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF ME.RCH ANTABII TTY OR FITNESS FORA PARTICULAR PURPOSE. ALLISON TRANSMISSION DOESNOT 1t t HOHIZE AN} T)ERSON TO CREATE FOR IT ANY OTHER OBLIGATION OR LIABILITY IN CONNECTION WITH SUCH TRANti:%IISS IONS. ALLISON TRANSMISSION SI[ALL NOT BE LIABLE FOR INCIDENTAI. OR CONSEQUENTIAL DAMAGES Rh:ST-LTING FROM BREACH OF THIS W.ARR:ANTY OR ANI1111'1.11:D WARRANTY. QUESTIONS If you have any questions regarding this warranty or the per€arntance of warranty obligations, you may contact any Allison Transmission Distributor or Dealer or write to: Allison Transmission, Inc. P.O. Box 894 Indianapolis, IN 46206-0894 Attention: Warranty Administration PF -9 Form SE0616EN (201 U09) page 2 of 2 - Fire and Rescue Apparatus One (1) Year Material and Workmanship Basic Apparatus Limited Warranty 1. LIMITED WARRANTY Subject to the limitations and exclusions set forth below, Pierce Manufacturing provides the following warranty to the Buyer: This limited warranty shall apply only if the product is property maintained in accordance with Pierce's maintenance instructions and manuals and is used in service which is normal to the particular model Normal service means service which does not subject the product to stresses or impacts greater than normally result from careful use. If the Buyer discovers a detect or nonconformity, it must notify Pierce in writing within thirty (30) days after the date of discovery. but in any event prior to the expiralion of the warranty period. THIS LIMITED WARRANTY MAY NOT BE ASSIGNED OR OTHERWISE TRANSFERRED BY THE BUYER TO ANY SUBSEQUENT USER OR PURCHASER OR TO ANY OTHER PERSON OR ENTITY. 218/2010 WA0008 Notwithstanding anything to the contrary herein. Pierce makes no warranty whatsoever as to: (a) any integral pads, components, attachments or trade accessories of or to the product that are not manufactured by Pierce, including but not limited to engines. transmissions. drivelires, axles, water pumps and generators; with respect to all such parts, components. attachments and accessories. Pierce shall assign to Buyer the applicable warranties, it any, made by the respective manufacturers thereof; (b) any vehicle, chassis. or component. part. attachment or accessory damaged by misuse, neglect, fire, exposure to severe environmental er chemical conditions, acidic environment, improper maintenance, accident. crash, or force majeure such as natural disaster, lightning, earthquake, windstorm, hail, flood, war or not; (c) any vehicle, chassis or component, part, attachment er accessory that has been repaired. altered or assembled in any way by any person or entity other than Pierce which, in the sole judgment of Pierce, adversely affects the performance, stability or purpose for which it was manufactured: or (d) products or parts which may in the ordinary course wear out and have to be replaced during the warranty period. including, but not limited to, tires, fluids, gaskets and light bulbs. Pierce assumes no responsibility far the assembly of its parts or subassemblies into finishing products or vehicles unless the assembly is performed by Pierce. The original purchaser may void this warranty in part or in its entirety if the product is repaired or replaced (a) without prior written approval of the Pierce Customer Service Department; or (b) at a facility which has not been approved by Pierce as to technical capability. Any repairs. modificaWns, alterations or aftermarket parts added after manufacture without the authorization of Pierce may void this warranty. 2. DISCLAIMERS OF WARRANTIES THE WARRANTY SET FORTH IN PARAGRAPH t IS THE SOLE AND EXCLUSIVE WARRANTY GIVEN BY PIERCE. PIERCE HEREBY DISCLAIMS AND EXCLUDES ALL OTHER WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY, ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, AND ANY WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE. 3. BUYER'S EXCLUSIVE REMEDY. It the product tails to con£onn to the warranty set forth in paragraph 1 during the warranty period, and such nonconformity is not due to misuse, neglect, accident or improper maintenance, Buyer must notify Pierce within the lime period speed in paragraph 1, and shall make the product available for inspection by Pierce or its designated agent. At the request of Pierce, any allegedly defective product shall he returned to Pierce by Buyer for examination andfor repair. Buyer shall be responsible for the cost of such transportation. and for nsk of loss of or damage to the product dunng transportation. Within a reasonable lime. Pierce shall repair or replace (at Pierce's option and expense) any nonconforming or defective parts. Repair or replacement shall be made only by a facility approved in advance in writing by Pierce. THIS REMEDY SHALL BE THE EXCLUSIVE AND SOLE REMEDY FOR ANY BREACH OF WARRANTY. 4. EXCLUSION OF CONSEQUENTIAL AND INCIDENTAL DAMAGES. Notwithstanding anything to the contrary herein or in any agreement between Pierce and Buyer. IN NO EVENT SHALL PIERCE BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL. SPECIAL. INDIRECT, OR PUNITIVE DAMAGES WHATSOEVER, WHETHER ARISING OUTOF BREACH OF CONTRACT, WARRANTY. TORT (INCLUDING NEGLIGENCE AND STRICT LIABILITY) OR OTHER THEORY OF LAW OR EQUITY. WITH RESPECT TO VEHICLES OR OTHER PRODUCTS SOLD BY PIERCE. OR THEIR OPERATION OR FAILURE TO OPERATE. OR ANY DEFECTS THEREIN, OR ANY UNDERTAKINGS, ACTS OR OMISSIONS RELATED THERETO, REGARDLESS OF WHETHER PIERCE HAS BEEN INFORMED OF THE POSSIBILITY OF ANY SUCH DAMAGES. Without limiting the genera€ity of the foregoing. Pierce specifically disclaims any liability for property or personal Injury damages, penalties, damages for lest profits or revenues. loss of vehicles or products or any associated equipment, cost of substitute vehicles or products, down-time, delay damages, any other types of economic less, or for any claims by any third party for any such damages, Nole: Any Surety Bond, if a part of the sale of the vehicle as to which this limited warranty is provided. applies only to this Pierce Basic One Year Limited Warranty for such vehicle, and not to other warranties made by Pierce in a separate document (if any) or to The warranties (it any) made by any manufacturer (other than Pierce) of any part, component, attachment or accessory that is incorporated into or attached to the vehicle 8-100 Portions of the apparatus manufactured by Pierce shall be Coverage: free from defects in material and workmanship The date the apparatus is placed in service, or 60 days from Warranty Begins: she original buyer invoice date, whichever comes First. Warranty Period Twelve (12) months. Ends All Conditions and Exclusions: No specific exclusions apply See Also Paragraphs 2lhru 4 This limited warranty shall apply only if the product is property maintained in accordance with Pierce's maintenance instructions and manuals and is used in service which is normal to the particular model Normal service means service which does not subject the product to stresses or impacts greater than normally result from careful use. If the Buyer discovers a detect or nonconformity, it must notify Pierce in writing within thirty (30) days after the date of discovery. but in any event prior to the expiralion of the warranty period. THIS LIMITED WARRANTY MAY NOT BE ASSIGNED OR OTHERWISE TRANSFERRED BY THE BUYER TO ANY SUBSEQUENT USER OR PURCHASER OR TO ANY OTHER PERSON OR ENTITY. 218/2010 WA0008 Notwithstanding anything to the contrary herein. Pierce makes no warranty whatsoever as to: (a) any integral pads, components, attachments or trade accessories of or to the product that are not manufactured by Pierce, including but not limited to engines. transmissions. drivelires, axles, water pumps and generators; with respect to all such parts, components. attachments and accessories. Pierce shall assign to Buyer the applicable warranties, it any, made by the respective manufacturers thereof; (b) any vehicle, chassis. or component. part. attachment or accessory damaged by misuse, neglect, fire, exposure to severe environmental er chemical conditions, acidic environment, improper maintenance, accident. crash, or force majeure such as natural disaster, lightning, earthquake, windstorm, hail, flood, war or not; (c) any vehicle, chassis or component, part, attachment er accessory that has been repaired. altered or assembled in any way by any person or entity other than Pierce which, in the sole judgment of Pierce, adversely affects the performance, stability or purpose for which it was manufactured: or (d) products or parts which may in the ordinary course wear out and have to be replaced during the warranty period. including, but not limited to, tires, fluids, gaskets and light bulbs. Pierce assumes no responsibility far the assembly of its parts or subassemblies into finishing products or vehicles unless the assembly is performed by Pierce. The original purchaser may void this warranty in part or in its entirety if the product is repaired or replaced (a) without prior written approval of the Pierce Customer Service Department; or (b) at a facility which has not been approved by Pierce as to technical capability. Any repairs. modificaWns, alterations or aftermarket parts added after manufacture without the authorization of Pierce may void this warranty. 2. DISCLAIMERS OF WARRANTIES THE WARRANTY SET FORTH IN PARAGRAPH t IS THE SOLE AND EXCLUSIVE WARRANTY GIVEN BY PIERCE. PIERCE HEREBY DISCLAIMS AND EXCLUDES ALL OTHER WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY, ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, AND ANY WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE. 3. BUYER'S EXCLUSIVE REMEDY. It the product tails to con£onn to the warranty set forth in paragraph 1 during the warranty period, and such nonconformity is not due to misuse, neglect, accident or improper maintenance, Buyer must notify Pierce within the lime period speed in paragraph 1, and shall make the product available for inspection by Pierce or its designated agent. At the request of Pierce, any allegedly defective product shall he returned to Pierce by Buyer for examination andfor repair. Buyer shall be responsible for the cost of such transportation. and for nsk of loss of or damage to the product dunng transportation. Within a reasonable lime. Pierce shall repair or replace (at Pierce's option and expense) any nonconforming or defective parts. Repair or replacement shall be made only by a facility approved in advance in writing by Pierce. THIS REMEDY SHALL BE THE EXCLUSIVE AND SOLE REMEDY FOR ANY BREACH OF WARRANTY. 4. EXCLUSION OF CONSEQUENTIAL AND INCIDENTAL DAMAGES. Notwithstanding anything to the contrary herein or in any agreement between Pierce and Buyer. IN NO EVENT SHALL PIERCE BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL. SPECIAL. INDIRECT, OR PUNITIVE DAMAGES WHATSOEVER, WHETHER ARISING OUTOF BREACH OF CONTRACT, WARRANTY. TORT (INCLUDING NEGLIGENCE AND STRICT LIABILITY) OR OTHER THEORY OF LAW OR EQUITY. WITH RESPECT TO VEHICLES OR OTHER PRODUCTS SOLD BY PIERCE. OR THEIR OPERATION OR FAILURE TO OPERATE. OR ANY DEFECTS THEREIN, OR ANY UNDERTAKINGS, ACTS OR OMISSIONS RELATED THERETO, REGARDLESS OF WHETHER PIERCE HAS BEEN INFORMED OF THE POSSIBILITY OF ANY SUCH DAMAGES. Without limiting the genera€ity of the foregoing. Pierce specifically disclaims any liability for property or personal Injury damages, penalties, damages for lest profits or revenues. loss of vehicles or products or any associated equipment, cost of substitute vehicles or products, down-time, delay damages, any other types of economic less, or for any claims by any third party for any such damages, Nole: Any Surety Bond, if a part of the sale of the vehicle as to which this limited warranty is provided. applies only to this Pierce Basic One Year Limited Warranty for such vehicle, and not to other warranties made by Pierce in a separate document (if any) or to The warranties (it any) made by any manufacturer (other than Pierce) of any part, component, attachment or accessory that is incorporated into or attached to the vehicle 8-100 sir' •lFji y" if? Ot 0, 111111.','114 0, Willi iffl'it Milli Milk 10101 lIllilf Milk "Mot Ill Ill( iflit slilly llilist Iflim 00111 IMlill, ilMii ;Xifii IIIIIJIURililft i101111 11 Will it I I if &A"It I i A if] 111W. - - - -- — - - — — V! S.�Oarley rit Mo. Pump Standard Limited Warranty W.S. Dailey & Co herein ielerred to as "Darley" warrants all truck mounted splitshalt nudship, PTO Darley Pumps and accessories of its manufacture to be free from detects in material and workmanship. under normal use and service. lot a period of six years from the date placed into service, 6 '/ years from date of manufacture or 6000 hours of usage (unless otherwise specified). whichever comes first. Portable and engine driven pumps shall carry a three year warranty. Under this warranty, Darley will cover labor charges on all pumps lot a period of three years from [tie date the pump is placed into service. This warranty applies to any pump shipped after July 1, 2007. This limited warranty is effective only if the equipment or apparatus is used as directed, is not subjected to misuse, negligence or accident, and is not altered, treated of repaired by someone other than Darley or its designee- Items not manufactured by Darley shall bear only the limited warranties offered by their respective manufacturers. Transportation charges on products submitted for repair or replacement must be borne by purchaser. Carley does offer extended warranties available for all additional charge. These warranties must be ordered at the time the pump order is placed. Warranties tip to 20 years are available (See Carley Premium Protection Plan) The exclusive remedy for breach of this warranty shall be to give Darley written notice thereof and to request a Returned Goods Authorization. Upon receipt of the Returned Goods Authorization. the buyer will return [lie non -conforming material to Darley F.O.B. its plant within thirty days after the buyer has received the Returned Goods Authorization. Carley s examination of the returned parts shall disclose to its satisfaction it the product is defective and an adjustment, repair, or replacement is requited. Thereupon Darley. at its own election. shall repair or replace the same or repay the price thereof. The amount of such adjustment shall not exceed the original net sales price of the detective product only. No proximate. incidental, consequential of other damages shall be recoverable. Following the examination of the detective product or material Darley shall be provided with estimates of repair, if during the 3 year labor coverage period, and viiii provide approval for the estimated amount or shall determine the a11101,111t of reimbursement to be provided by Darley. Darley shall not be liable for freight, travel expenses, or consequential damages incurred during or associated with the repair. Carley shall not be liable for consequential damages or contingent liabilities including: but not limited to, loss of life, personal injury, loss of crops. loss (tire to fire or water property damage, and consequential trade or other commercial loss arising out of the failure of Manufacturer's product. DARLEY MAKES NO WARRANTIES OF FREEDOM FROM PATENT INFRINGEMENT, OF MERCHANTABILITY, OF FITNESS FOR A PARTICULAR PURPOSE OR ARISING FROM A COURSE OF DEALING OR USAGE OF TRADE OR OTHER LIKE OR DIFFERENT EXPRESS OR IMPLIED WARRANTIES EXCEPT AS MADE ABOVE. W.S. Darley and Co. 325 Spring Lake Dr. Itasca, Illinois 60143 IIIIIIIrz IM1111-;IIIIIII ill!?r' 11'111 lis 0111' Il;illl� 111 11 olow, 14161 IIINi FI U11 111111 '='}11111! 1 111111 111111 NIM='�UI111 illillf '111ill 110W lill"k 'Hill, 041W "Poil +l! -ill lffi.tl 1111111 14I11,li pf;illf pillfil 04101 HOW 110641 H11W Milli M4401 Ill 'y'lt - R .11t.t '1 1111411 . aft/ f..w fl#f 1,4011$till - I - $ -'I - I I - � 4 P , . ;p' 811 r 111too11 1 11164 8-101 - - Fire and Rescue Apparatus Three (3) Year Material and Workmanship Goldstar® Gold Leaf Lamination r` 1. 1074 l alA 1. LIMITED WARRANTY Subject to the limitations and exclusions set forth below, Pierce Manufacturing provides the following warranty to the Buyer: This limited warranty shall apply only if the product is property maintained in accordance with Pierce's maintenance instructions and manuals and is used in service which is normal to the particular model Normal service means service which does not subject the product to stresses or impacts greater than normally result from careful use It the Buyer discovers a defect or nonconformity, it must notify Pierce in wdling within thirty (30) days after the date of discovery. but in any event prior to the expiration of the warranty period. THIS LIMITED WARRANTY MAY NOT BE ASSIGNED OR OTHERWISE TRANSFERRED BY THE BUYER TO ANY SUBSEQUENT USER OR PURCHASER OR TO ANY OTHER PERSON OR ENTITY. 212212010 WA0018 Notwithstanding anything to the contrary herein, Pierce makes no warranty whatsoever as lo: (a) any integral parts. components, attachments or trade accessories of or to the product that are not manufactured by Pierce. including but not 4miled to engines, transmissions. drivelines, axles, water pumps and generators: with respect to all such parts. components, attachments and accessories, Pierce shall assign to Buyer the appllcatic warranties, if any, made by the respective manufacturers thereof: (b) any vehicle, chassis, or component, part, attachment or accessory damaged by misuse. neglect, fire, exposure to severe environmental or chemical conditions, acidic environment, improper maintenance, accident, crash, or force majeure such as natural disaster. lightning, earthquake, windstorm. hail. flood, war or riot; (c) any vehicle, chassis or component. part. attachment or accessory that has been repaired, allered or assembled in any way by any person or entity other than Pierce which, in the sole judgment of Pierce, adversely affects the performance, stability or purpose for which it was manufactured; or (d) products or parts which may in the ordinary Course wear out and have to be replaced during the warranty period, including, but not limited to. tires, fluids, gaskets and light bulbs, Pierce assumes no responsibility for the assembly of its parts or subassemblies into finishing products or vehicles unless the assembly is performed by Pierce. The original purchaser may void this warranty in part or in its entirety if the product is repaired or replaced (a) without prior written approval of the Pieroe Customer Service Department: or (b) at a facility which has not been approved by Pierce as to technical Capability. Any repairs, modifications, alterations or aftermarket parts added after manufacture without the authorization of Pierce may void this warranty - Y. DISCLAIMERS OF WARRANTIES THE WARRANTY SET FORTH IN PARAGRAPH 1 IS THE SOLE AND EXCLUSIVE WARRANTY GIVEN BY PIERCE. PIERCE HEREBY DISCLAIMS AND EXCLUDES ALL OTHER WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY. INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY, ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, AND ANY WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE, 3. BUYER'S EXCLUSIVE REMEDY. If the product fails to conform to the warranty set forth in paragraph 1 during the warranty period, and such nonconformity is not due to misuse, neglect, accident or improper maintenance, Buyer must notify Pierce within the time period specified in paragraph 1, and shall make the product available for inspection by Pierce or its designated agent. At the request of Pierce, any allegedly defective product shall be retumed to Pierce by Buyer for examination andfor repair. Buyer shall be responsible for the cast of such transportation, and for risk of loss of or damage to the product during transportation. Within a reasonable time, Pierce shall repair or replace (at Pierces option and expense) any nonconforming or defective parts. Repair or replacement shall be made only by a facility approved in advance in writing by Pierce. THIS REMEDY SHALL BE THE EXCLUSIVE AND SOLE REMEDY FOR ANY BREACH OF WARRANTY. 4, EXCLUSION OF CONSEQUENTIAL AND INCIDENTAL DAMAGES. Notwithstanding anything to the contrary herein or in any agreement between Pierce and Buyer, IN NO EVENT SHALL PIERCE BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, SPECIAL, INDIRECT, OR PUNITIVE DAMAGES WHATSOEVER, WHETHER ARISING OUT OF BREACH OF CONTRACT, WARRANTY. TORT (INCLUDING NEGLIGENCE AND STRICT LIABILITY) OR OTHER THEORY OF LAW OR EQUITY. WITH RESPECT TO VEHICLES OR OTHER PRODUCTS SOLD BY PIERCE, OR THEIR OPERATION OR FAILURE TO OPERATE, OR ANY DEFECTS THEREIN, OR ANY UNDERTAKINGS. ACTS OR OMISSIONS RELATED THERETO, REGARDLESS OF WHETHER PIERCE HAS BEEN INFORMED OF THE POSSIBILITY OF ANY SUCH DAMAGES. Without limiting the generality of the foregoing. Pierce specifically disclaims any liability for property or personal injury damages, penalties, damages for lost profits or revenues, loss of vehicles or products or any associated equipment, cost of substitute vehicles or products, down-time, delay damages. any other types of economic loss, or for any claims by any third party for any such damages_ Note: Any Surely Bond, if a part of the sale of the vehicle as to which this limited warranty is provided, applies only to this Pierce Basic One Year Limited Warranty for such vehicle, and not to other warranties made by Pierce in a separate document firanyj or to the warranties {if any) made by any manufacturer (other than Pierce) of any part. component. attachment or accessory that is incorporated into or attached to the vehicle. 8-102 Each Goldstart gold leaf lamination shall be free from Coverage: defects in material and workmanship. The date of the original purchase invoice (issued when the Warranty Begins: product ships from the factory). Warranty Period Three (3) Years Ends After: Conditions and Exclusions: This warranty does not cover damage from lack of maintenance and cleaning (proper cleaning and maintenance See Also procedures are detailed in the Pierce operation and Paragraphs maintenance manual). 2 thru 4 This limited warranty shall apply only if the product is property maintained in accordance with Pierce's maintenance instructions and manuals and is used in service which is normal to the particular model Normal service means service which does not subject the product to stresses or impacts greater than normally result from careful use It the Buyer discovers a defect or nonconformity, it must notify Pierce in wdling within thirty (30) days after the date of discovery. but in any event prior to the expiration of the warranty period. THIS LIMITED WARRANTY MAY NOT BE ASSIGNED OR OTHERWISE TRANSFERRED BY THE BUYER TO ANY SUBSEQUENT USER OR PURCHASER OR TO ANY OTHER PERSON OR ENTITY. 212212010 WA0018 Notwithstanding anything to the contrary herein, Pierce makes no warranty whatsoever as lo: (a) any integral parts. components, attachments or trade accessories of or to the product that are not manufactured by Pierce. including but not 4miled to engines, transmissions. drivelines, axles, water pumps and generators: with respect to all such parts. components, attachments and accessories, Pierce shall assign to Buyer the appllcatic warranties, if any, made by the respective manufacturers thereof: (b) any vehicle, chassis, or component, part, attachment or accessory damaged by misuse. neglect, fire, exposure to severe environmental or chemical conditions, acidic environment, improper maintenance, accident, crash, or force majeure such as natural disaster. lightning, earthquake, windstorm. hail. flood, war or riot; (c) any vehicle, chassis or component. part. attachment or accessory that has been repaired, allered or assembled in any way by any person or entity other than Pierce which, in the sole judgment of Pierce, adversely affects the performance, stability or purpose for which it was manufactured; or (d) products or parts which may in the ordinary Course wear out and have to be replaced during the warranty period, including, but not limited to. tires, fluids, gaskets and light bulbs, Pierce assumes no responsibility for the assembly of its parts or subassemblies into finishing products or vehicles unless the assembly is performed by Pierce. The original purchaser may void this warranty in part or in its entirety if the product is repaired or replaced (a) without prior written approval of the Pieroe Customer Service Department: or (b) at a facility which has not been approved by Pierce as to technical Capability. Any repairs, modifications, alterations or aftermarket parts added after manufacture without the authorization of Pierce may void this warranty - Y. DISCLAIMERS OF WARRANTIES THE WARRANTY SET FORTH IN PARAGRAPH 1 IS THE SOLE AND EXCLUSIVE WARRANTY GIVEN BY PIERCE. PIERCE HEREBY DISCLAIMS AND EXCLUDES ALL OTHER WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY. INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY, ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, AND ANY WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE, 3. BUYER'S EXCLUSIVE REMEDY. If the product fails to conform to the warranty set forth in paragraph 1 during the warranty period, and such nonconformity is not due to misuse, neglect, accident or improper maintenance, Buyer must notify Pierce within the time period specified in paragraph 1, and shall make the product available for inspection by Pierce or its designated agent. At the request of Pierce, any allegedly defective product shall be retumed to Pierce by Buyer for examination andfor repair. Buyer shall be responsible for the cast of such transportation, and for risk of loss of or damage to the product during transportation. Within a reasonable time, Pierce shall repair or replace (at Pierces option and expense) any nonconforming or defective parts. Repair or replacement shall be made only by a facility approved in advance in writing by Pierce. THIS REMEDY SHALL BE THE EXCLUSIVE AND SOLE REMEDY FOR ANY BREACH OF WARRANTY. 4, EXCLUSION OF CONSEQUENTIAL AND INCIDENTAL DAMAGES. Notwithstanding anything to the contrary herein or in any agreement between Pierce and Buyer, IN NO EVENT SHALL PIERCE BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, SPECIAL, INDIRECT, OR PUNITIVE DAMAGES WHATSOEVER, WHETHER ARISING OUT OF BREACH OF CONTRACT, WARRANTY. TORT (INCLUDING NEGLIGENCE AND STRICT LIABILITY) OR OTHER THEORY OF LAW OR EQUITY. WITH RESPECT TO VEHICLES OR OTHER PRODUCTS SOLD BY PIERCE, OR THEIR OPERATION OR FAILURE TO OPERATE, OR ANY DEFECTS THEREIN, OR ANY UNDERTAKINGS. ACTS OR OMISSIONS RELATED THERETO, REGARDLESS OF WHETHER PIERCE HAS BEEN INFORMED OF THE POSSIBILITY OF ANY SUCH DAMAGES. Without limiting the generality of the foregoing. Pierce specifically disclaims any liability for property or personal injury damages, penalties, damages for lost profits or revenues, loss of vehicles or products or any associated equipment, cost of substitute vehicles or products, down-time, delay damages. any other types of economic loss, or for any claims by any third party for any such damages_ Note: Any Surely Bond, if a part of the sale of the vehicle as to which this limited warranty is provided, applies only to this Pierce Basic One Year Limited Warranty for such vehicle, and not to other warranties made by Pierce in a separate document firanyj or to the warranties {if any) made by any manufacturer (other than Pierce) of any part. component. attachment or accessory that is incorporated into or attached to the vehicle. 8-102 Fire and Rescue Apparatus Twelve (12) Year Pro -Rated Paint and Corrosion Stainless Steel Body Limited Warranty 1. LIMITED WARRANTY Subject to the limitations and exclusions set forth below, Pierce Manufacturing provides the following warranty to the Buyer: This limited warranty shall apply only if the product is property maintained in accordance with Pierce's maintenance instructions and manuals and is used in service which is normal to the particular model. Normal service means service which does not subject the product to stresses Cr impacts greater than normally result from careful use. If the Buyer discovers a defect or nonconformity, it must notify Pierce in wriling within thirty (30) days after the date of discovery, but in any event prior to the expiration of the warranty period. THIS LIMITED WARRANTY MAY NOT BE ASSIGNED OR OTHERWISE TRANSFERRED BY THE BUYER TO ANY SUBSEQUENT USER OR PURCHASER OR TO ANY OTHER PER50N OR ENTITY, 2/8/2014 WA0058 Notwithstanding anything to the contrary herein. Pierce makes no warranty whatsoever as to: (a) any integral pans, components, attachments or trade accessories of cr to the product that are not manufactured by Pierce, including but net limited to engines, transmissions, drivelines, axles. water pumps and generalors: with respect to all such parts, components, attachments and accessories. Pierce shall assign to Buyer the applicable warranties. if any, made by the respective manufacturers thereof. (b) any vehicle, chassis, or component, part, attachment or accessary damaged by misuse, neglect, fire, exposure to severe environmental or chemical conditions, acidic environment, improper maintenance, accident, crash, or force majeure such as natural disaster, lighlning, earthquake, windstorm, hall, flood, war Cr riot; (c) any vehicle, chassis or component. pan, attachment or accessory that has been repaired, altered or assembled in any way by any person or entity other than Pierce which, in the sole judgment of Pierce. adversely affects the performance, stability or purpose for which it was manufaclured; or (d) products or pans which may in the ordinary course wear out and have to be replaced during the warranty period, including, but not limited to. liras, fluids. gaskets and light bulbs. Pierce assumes no responsibility for the assembly of its parts or subassemblies into finishing products or vehicles unless the assembly is perforated by Pierce. The original purchaser may void this warranty in pad or in its entirety if the product is repaired or replaced (a) without prior written approval of the Pierce Customer Service Department: or (b) at a facility which has not been approved by Pierce as to technical capability. Any repairs, modifications, alterations or aftermarket pads added after manufacture without the authorization of Pierce may void this warranty. 2. DISCLAIMERS OF WARRANTIES THE WARRANTY SET FORTH IN PARAGRAPH 1 IS THE SOLE AND EXCLUSIVE WARRANTY GIVEN BY PIERCE. PIERCE HEREBY DISCLAIMS AND EXCLUDES ALL OTHER WARRANTIES. WHETHER EXPRESS. IMPLIED OR STATUTORY, INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY, ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, AND ANY WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE. 3. BUYER'S EXCLUSIVE REMEDY. II the product fails to Conform to the warranty set forth in paragraph 1 during the warranty period, and such nonconformity is not due to misuse. neglect, accident Cr improper maintenance, Buyer must notify Pierce within the time period speed in paragraph 1, and shall make the product available for inspection by Pierce or its designated agent. At the request of Pierce, any allegedly defective product shall be returned to Pierce by Buyer for examination and/or repair. Buyer shall be responsible for the cost of such transportation. and for risk of loss of or damage to the product during transportation, Within a reasonable time, Pierce shall repair or replace (at Pierces option and expense) any nonconforming or defective pads. Repair or replacement shall be made only by a facility approved in advance in writing by Pierce. THIS REMEDY SHALL BE THE EXCLUSIVE AND SOLE REMEDY FOR ANY BREACH OF WARRANTY. 4. EXCLUSION OF CONSEQUENTIAL AND INCIDENTAL DAMAGES. Notwithstanding anything to the contrary herein or in any agreement between Pierce and Buyer, IN NO EVENT SHALL PIERCE BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, SPECIAL, INDIRECT, OR PUNITIVE DAMAGES WHATSOEVER, WHETHER ARISING OUT OF BREACH OF CONTRACT, WARRANTY. TORT (INCLUDING NEGLIGENCE AND STRICT LIABILITY) OR OTHER THEORY OF LAW OR EQUITY, WITH RESPECT TO VEHICLES OR OTHER PRODUCTS SOLD BY PIERCE, OR THEIR OPERATION OR FAILURE TO OPERATE. OR ANY DEFECTS THEREIN, OR ANY UNDERTAKINGS. ACTS OR OMISSIONS RELATED THERETO, REGARDLESS OF WHETHER PIERCE HAS BEEN INFORMED OF THE POSSIBILITY OF ANY SUCH DAMAGES. Without limiting the generality, of the foregoing. Pierce specifically disclaims any liability for property or personal injury damages, penalties, damages for lost profits or revenues. loss of vehicles or products or any associated equipment, cast of substitute vehicles or products, down-time, delay damages, any other types of economic loss, or for any claims by any third party for any such damages. Note: Any Srirely Bond. +f a part of the safe of the vehicle as to which this limited warranty is provided, applies only to this Pierce Basic One Year Limited Warranty for such vehicle, and not to other warranties made by Pierce in a separate document litany) or to the warranties (if anyJ made by any manufacturer (other than Pierce) of any pad, component, attachment or accessory that is incorporated into or attached to the vehicle. 8-103 Exterior surfaces of the body shall be free from blistering, Coverage: peeling, corrosion or any other adhesion defect caused by defective manufacturing methods or paint material selection. The date of the original purchase invoice (issued when the Warranty Begins: product ships from the factory). Warranty Period Ends After: Twelve (12) Years This warranty is applicable to the vehicle in the following percentage casts of repair, if any: Topcoat Durability & Appearance: Gloss, Color Retention S Cracking 0-72 months 100% 73.96 months 50% 97-120 months 25% Integrity of Coating System: Adhesion, BllsteringlBubbling 0-72 months 100% 73-96 months 50% 97-144 months 25% Conditions and Exclusions: Corrosion: Dissimilar Metal and Crevice 048 months 100% See Also 49.72 months 50% Paragraphs 73-144 months 25 % 2 thm 4 Corrosion Perforation 0-120 months 100% This warranty applies only to exterior paint. Paint on the vehicle's interior and undercarriage is warranted only under the Pierce Basic One Year Limited Warranty. Items not covered by this warranty include: (a} Damage from lack of maintenance and cleaning (proper cleaning and maintenance procedures are detailed in the Pierce operation and maintenance manual). (b) UV paint fade. This limited warranty shall apply only if the product is property maintained in accordance with Pierce's maintenance instructions and manuals and is used in service which is normal to the particular model. Normal service means service which does not subject the product to stresses Cr impacts greater than normally result from careful use. If the Buyer discovers a defect or nonconformity, it must notify Pierce in wriling within thirty (30) days after the date of discovery, but in any event prior to the expiration of the warranty period. THIS LIMITED WARRANTY MAY NOT BE ASSIGNED OR OTHERWISE TRANSFERRED BY THE BUYER TO ANY SUBSEQUENT USER OR PURCHASER OR TO ANY OTHER PER50N OR ENTITY, 2/8/2014 WA0058 Notwithstanding anything to the contrary herein. Pierce makes no warranty whatsoever as to: (a) any integral pans, components, attachments or trade accessories of cr to the product that are not manufactured by Pierce, including but net limited to engines, transmissions, drivelines, axles. water pumps and generalors: with respect to all such parts, components, attachments and accessories. Pierce shall assign to Buyer the applicable warranties. if any, made by the respective manufacturers thereof. (b) any vehicle, chassis, or component, part, attachment or accessary damaged by misuse, neglect, fire, exposure to severe environmental or chemical conditions, acidic environment, improper maintenance, accident, crash, or force majeure such as natural disaster, lighlning, earthquake, windstorm, hall, flood, war Cr riot; (c) any vehicle, chassis or component. pan, attachment or accessory that has been repaired, altered or assembled in any way by any person or entity other than Pierce which, in the sole judgment of Pierce. adversely affects the performance, stability or purpose for which it was manufaclured; or (d) products or pans which may in the ordinary course wear out and have to be replaced during the warranty period, including, but not limited to. liras, fluids. gaskets and light bulbs. Pierce assumes no responsibility for the assembly of its parts or subassemblies into finishing products or vehicles unless the assembly is perforated by Pierce. The original purchaser may void this warranty in pad or in its entirety if the product is repaired or replaced (a) without prior written approval of the Pierce Customer Service Department: or (b) at a facility which has not been approved by Pierce as to technical capability. Any repairs, modifications, alterations or aftermarket pads added after manufacture without the authorization of Pierce may void this warranty. 2. DISCLAIMERS OF WARRANTIES THE WARRANTY SET FORTH IN PARAGRAPH 1 IS THE SOLE AND EXCLUSIVE WARRANTY GIVEN BY PIERCE. PIERCE HEREBY DISCLAIMS AND EXCLUDES ALL OTHER WARRANTIES. WHETHER EXPRESS. IMPLIED OR STATUTORY, INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY, ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, AND ANY WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE. 3. BUYER'S EXCLUSIVE REMEDY. II the product fails to Conform to the warranty set forth in paragraph 1 during the warranty period, and such nonconformity is not due to misuse. neglect, accident Cr improper maintenance, Buyer must notify Pierce within the time period speed in paragraph 1, and shall make the product available for inspection by Pierce or its designated agent. At the request of Pierce, any allegedly defective product shall be returned to Pierce by Buyer for examination and/or repair. Buyer shall be responsible for the cost of such transportation. and for risk of loss of or damage to the product during transportation, Within a reasonable time, Pierce shall repair or replace (at Pierces option and expense) any nonconforming or defective pads. Repair or replacement shall be made only by a facility approved in advance in writing by Pierce. THIS REMEDY SHALL BE THE EXCLUSIVE AND SOLE REMEDY FOR ANY BREACH OF WARRANTY. 4. EXCLUSION OF CONSEQUENTIAL AND INCIDENTAL DAMAGES. Notwithstanding anything to the contrary herein or in any agreement between Pierce and Buyer, IN NO EVENT SHALL PIERCE BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, SPECIAL, INDIRECT, OR PUNITIVE DAMAGES WHATSOEVER, WHETHER ARISING OUT OF BREACH OF CONTRACT, WARRANTY. TORT (INCLUDING NEGLIGENCE AND STRICT LIABILITY) OR OTHER THEORY OF LAW OR EQUITY, WITH RESPECT TO VEHICLES OR OTHER PRODUCTS SOLD BY PIERCE, OR THEIR OPERATION OR FAILURE TO OPERATE. OR ANY DEFECTS THEREIN, OR ANY UNDERTAKINGS. ACTS OR OMISSIONS RELATED THERETO, REGARDLESS OF WHETHER PIERCE HAS BEEN INFORMED OF THE POSSIBILITY OF ANY SUCH DAMAGES. Without limiting the generality, of the foregoing. Pierce specifically disclaims any liability for property or personal injury damages, penalties, damages for lost profits or revenues. loss of vehicles or products or any associated equipment, cast of substitute vehicles or products, down-time, delay damages, any other types of economic loss, or for any claims by any third party for any such damages. Note: Any Srirely Bond. +f a part of the safe of the vehicle as to which this limited warranty is provided, applies only to this Pierce Basic One Year Limited Warranty for such vehicle, and not to other warranties made by Pierce in a separate document litany) or to the warranties (if anyJ made by any manufacturer (other than Pierce) of any pad, component, attachment or accessory that is incorporated into or attached to the vehicle. 8-103 - Fire and Rescue Apparatus Ten (10) Year Pro -Rated Paint and Corrosion Cab 1. LIMITED WARRANTY Subject to the limitations and exclusions set forth below, Pierce Manufactunng provides the following warranty to the Buyer: This limited warranty shall apply only if the product is properly maintained in accordance with Pierces maintenance instructions and manuals and is used in service which is normal to the particular model, Normal service means service which does not subject the product to stresses or impacts greater than normally result from careful use. If the Buyer discovers a defect or nenconformily. it must notify Pierce in writing within thirty (30) days after the date of discovery, but in any event prior to the expiration of the warranty period. THIS LIMITED WARRANTY MAY NOT BE ASSIGNED OR OTHERWISE TRANSFERRED BY THE BUYER TO ANY SUBSEQUENT USER OR PURCHASER OR TO ANY OTHER PERSON OR ENTITY_ 2/8/2010 WA0055 Notwithstanding anything to the contrary herein, Pierce makes no warranty whatsoever as tc: (a) any integral parts, components, attachments or trade accessories of or to the produrl that are not manufactured by Pierce, including but not limited to engines. transmissions. drivelines, axles, water pumps and generators; with respect to aft such parts, components, attatdsnI and accessories. Pierce shall assign to Buyer the applicable warranties, it any, made by the respective manufacturers thereof: (b) any vehicle. chassis, or component. pan. attachment or accessory damaged by misuse, neglect, fire, exposure to severe environmental or chemical conditions, acidic environment, improper maintenance, accident, crash, or force majeure such as natural disaster, lightning, earthquake, windstorm, hail, flood, war or dot; (c) any vehicle, chassis or component, part, attachment or accessory that has been repaired, altered or assembled in any way by any person or entity other than Pierce which, in the sone judgment of Pierce, adversely affects the performance, stability or purpose for which it was manufactured; or (d) products or parts which may in the ordinary course wear out and have to be replacer. during the warranty period, including, but not limited to, fires, fluids, gaskets and light bulbs. Pierce assumes no responsibility for the assembly of its pads or subassemblies into finishing products or vehicles unless the assembly is performed by Pierce. The original purchaser may veid this warranty in part or in its entirety if the product is repaired or replaced (a) without prior written approval of the Pierce Customer Service Department; or (b) at a facility which has not been approved by Pierce as to technical capability, Any repairs, modifications, alterations or aftermarket pads added after manufacture without the authorization of Pierce may void this warranty 2. DISCLAIMERS OF WARRANTIES THE WARRANTY SET FORTH IN PARAGRAPH 1 IS THE SOLE AND EXCLUSIVE WARRANTY GIVEN BY PIERCE, PIERCE HEREBY DISCLAIMS AND EXCLUDES Al - OTHER WARRANTIES. WHETHER EXPRESS, IMPLIED OR STATUTORY. INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY, ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, AND ANY WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE. 3. BUYER'S EXCLUSIVE REMEDY. If the product fails to conform to the warranty set forth in paragraph 1 during the warrant; period, and such nonconformity is not due to misuse, neglect, accident or improper maintenance, Buyer must notify Pierce within the time period specified in paragraph 1. and shall make the product available for inspection by Pierce or its designated agent. At the request of Pieme, any allegedly defective product shall he returned to Pierce by Buyer for examination and/or repair. Buyer shall be responsible for the cost of such transportation, and for risk of loss of or damage to the product during transportation. Within a reasonable time. Pierce shall repair or replace (at Pierces option and expensei any nonconforming or defective parts, Repair or replacement shall be made only by a facility approved in advance in writing by Pierce- THIS REMEDY SHALL BE THE EXCLUSIVE AND SOLE REMEDY FOR ANY BREACH OF WARRANTY. 4. EXCLUSION OF CONSEQUENTIAL AND INCIDENTAL DAMAGES. Notwithstanding anything to the contrary herein or in any agreement between Pierce and Buyer. IN NO EVENT SHALL PIERCE BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, SPECIAL, INDIRECT, OR PUNITIVE DAMAGES WHATSOEVER, WHETHER ARISING OUT OF BREACH OF CONTRACT. WARRANTY, TORT (INCLUDING NEGLIGENCE AND STRICT LIABILITY) OR OTHER THEORY OF LAW OR EQUITY, WITH RESPECT TO VEHICLES OR OTHER PRODUCTS SOLD BY PIERCE. OR THEIR OPERATION OR FAILURE TO OPERATE. OR ANY DEFECTS THEREIN. OR ANY UNDERTAKINGS. ACTS OR OMISSIONS RELATED THERETO. REGARDLESS OF WHETHER PIERCE HAS BEEN INFORMED OF: THE POSSIBILIT'f OF ANY SUCH DAMAGES. Without limiting the generality of the foregoing. Pierce specifically disclaims any liability for property or personal injury damages, penalties, damages for lost profits or revenues, Ions of vehides or products or any associated equipment, cost of substitute vehicles or products, down-time, delay damages, any othe, types of economic loss, or for any claims by any third party £er any such damages. Note: Any Surely Bond, if a part of the sale of the vehicle as to which this limited warranty is provided, applies only to this Pierce Basic One Year Limited Warranty for such vehicle, and nor to other warranties made by Pierce in a separate document (if an or t0 the warranties (if any) made by any manufacturer (other than Pierce) of any gaff. component, attachment or accessory that is incorporated into or attached to the vehicle e Exterior surfaces of the cab painted by Pierce shall be free from blistering, peeling, corrosion or any other adhesion Coverage: defect caused by defective manufacturing methods or paint material selection. The date of the original purchase invoice (issued when the Warranty Begins: product ships from the factory). Warranty Period Ten (10) Years Ends After: This limited warmuty is applicable to the vehicle in the following percentage costs of warranty repair, if any: Topcoat Durability & Appearance: Gloss, Color Retention & Cracking 0.72 months 100% 73-96 months 50% 97-120months25% Integrity of Coating System: Adhesion, Blistering/Bubbling 0-36 months 100% 37.84 months 50% 85.120 months 25% Conditions and Exclusions: Corrosion: Dissimilar Metal and Crevice 0.36 months 100% 37-48 months 50% See Also 49.72 months 25 Paragraphs 73-120 months 10% 2 thru 4 Corrosion Perforation 0.120 months 100 This limited warranty applies only to exterior paint. Paint an the vehicle's interior is warranted only under the Pierce Basic One Year Limited Warranty. Items not covered by this warranty include: (a) Damage from lack of maintenance and cleaning (proper cleaning and maintenance procedures am detailed in the Pierce operation and maintenance manual). (b) UV paint fade. (c) Any cab not manufactured by Pierce. This limited warranty shall apply only if the product is properly maintained in accordance with Pierces maintenance instructions and manuals and is used in service which is normal to the particular model, Normal service means service which does not subject the product to stresses or impacts greater than normally result from careful use. If the Buyer discovers a defect or nenconformily. it must notify Pierce in writing within thirty (30) days after the date of discovery, but in any event prior to the expiration of the warranty period. THIS LIMITED WARRANTY MAY NOT BE ASSIGNED OR OTHERWISE TRANSFERRED BY THE BUYER TO ANY SUBSEQUENT USER OR PURCHASER OR TO ANY OTHER PERSON OR ENTITY_ 2/8/2010 WA0055 Notwithstanding anything to the contrary herein, Pierce makes no warranty whatsoever as tc: (a) any integral parts, components, attachments or trade accessories of or to the produrl that are not manufactured by Pierce, including but not limited to engines. transmissions. drivelines, axles, water pumps and generators; with respect to aft such parts, components, attatdsnI and accessories. Pierce shall assign to Buyer the applicable warranties, it any, made by the respective manufacturers thereof: (b) any vehicle. chassis, or component. pan. attachment or accessory damaged by misuse, neglect, fire, exposure to severe environmental or chemical conditions, acidic environment, improper maintenance, accident, crash, or force majeure such as natural disaster, lightning, earthquake, windstorm, hail, flood, war or dot; (c) any vehicle, chassis or component, part, attachment or accessory that has been repaired, altered or assembled in any way by any person or entity other than Pierce which, in the sone judgment of Pierce, adversely affects the performance, stability or purpose for which it was manufactured; or (d) products or parts which may in the ordinary course wear out and have to be replacer. during the warranty period, including, but not limited to, fires, fluids, gaskets and light bulbs. Pierce assumes no responsibility for the assembly of its pads or subassemblies into finishing products or vehicles unless the assembly is performed by Pierce. The original purchaser may veid this warranty in part or in its entirety if the product is repaired or replaced (a) without prior written approval of the Pierce Customer Service Department; or (b) at a facility which has not been approved by Pierce as to technical capability, Any repairs, modifications, alterations or aftermarket pads added after manufacture without the authorization of Pierce may void this warranty 2. DISCLAIMERS OF WARRANTIES THE WARRANTY SET FORTH IN PARAGRAPH 1 IS THE SOLE AND EXCLUSIVE WARRANTY GIVEN BY PIERCE, PIERCE HEREBY DISCLAIMS AND EXCLUDES Al - OTHER WARRANTIES. WHETHER EXPRESS, IMPLIED OR STATUTORY. INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY, ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, AND ANY WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE. 3. BUYER'S EXCLUSIVE REMEDY. If the product fails to conform to the warranty set forth in paragraph 1 during the warrant; period, and such nonconformity is not due to misuse, neglect, accident or improper maintenance, Buyer must notify Pierce within the time period specified in paragraph 1. and shall make the product available for inspection by Pierce or its designated agent. At the request of Pieme, any allegedly defective product shall he returned to Pierce by Buyer for examination and/or repair. Buyer shall be responsible for the cost of such transportation, and for risk of loss of or damage to the product during transportation. Within a reasonable time. Pierce shall repair or replace (at Pierces option and expensei any nonconforming or defective parts, Repair or replacement shall be made only by a facility approved in advance in writing by Pierce- THIS REMEDY SHALL BE THE EXCLUSIVE AND SOLE REMEDY FOR ANY BREACH OF WARRANTY. 4. EXCLUSION OF CONSEQUENTIAL AND INCIDENTAL DAMAGES. Notwithstanding anything to the contrary herein or in any agreement between Pierce and Buyer. IN NO EVENT SHALL PIERCE BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, SPECIAL, INDIRECT, OR PUNITIVE DAMAGES WHATSOEVER, WHETHER ARISING OUT OF BREACH OF CONTRACT. WARRANTY, TORT (INCLUDING NEGLIGENCE AND STRICT LIABILITY) OR OTHER THEORY OF LAW OR EQUITY, WITH RESPECT TO VEHICLES OR OTHER PRODUCTS SOLD BY PIERCE. OR THEIR OPERATION OR FAILURE TO OPERATE. OR ANY DEFECTS THEREIN. OR ANY UNDERTAKINGS. ACTS OR OMISSIONS RELATED THERETO. REGARDLESS OF WHETHER PIERCE HAS BEEN INFORMED OF: THE POSSIBILIT'f OF ANY SUCH DAMAGES. Without limiting the generality of the foregoing. Pierce specifically disclaims any liability for property or personal injury damages, penalties, damages for lost profits or revenues, Ions of vehides or products or any associated equipment, cost of substitute vehicles or products, down-time, delay damages, any othe, types of economic loss, or for any claims by any third party £er any such damages. Note: Any Surely Bond, if a part of the sale of the vehicle as to which this limited warranty is provided, applies only to this Pierce Basic One Year Limited Warranty for such vehicle, and nor to other warranties made by Pierce in a separate document (if an or t0 the warranties (if any) made by any manufacturer (other than Pierce) of any gaff. component, attachment or accessory that is incorporated into or attached to the vehicle e 'aja!gaA oyj of payoeps jo o2u! patejadjoau! s+ jegj Ajossa33e jo juawgoeAe lueuodwao 'ped Aue to {aoja!d uegj jagja) jajnpelnuew ,(ue Fq apew {.fuel!) sequewem oqj 0j jo (Awtl!) juawnaop ejejedas a u! axo!d ,(q apew se!juejjem jagjo 071au pup "aja!gan gens joy Ajueuejyl Papuir7 JUGA 000 O!seg avaid s!gj of Aluo sa!ldde 'pap!nwd s! AjveueM papuq slgj ynigm of se ala!yan agj jo ajes agjlo ped el! 'puog AjajnS ,tub :ajoN sa6ewep vans Aue joj Aped pngl Ave Aq sw!ep Aue joj jo 'ssol o!wouooa to sad[,; jaglo Aue'sabewep Ae!ap'ow!l-umcp's;onpad jo sap!49n aln;!Isgns 10;sOa410awd!nha paleposse Ave jo s anpwd jo sop!4on to ssal 'sanuanaj jo slgwd lsal jot sa6ewep 'sagleuad 'sa6ewep Ajnlui leuosjad ja Apadoud joj Alp!gep Ave sw!eps!p Alleo!jpads aaje!d '6u!o69jol 9q) to 14!lejouab a4l 6u!I!w!I In047!M'S30VWVO HonS ANV d0 )ILI 1113ISSOd 31-11 JO a3w8O3Nt N33e SVH 30L13ld 83H13HM 30 SS310NtlO3N '01383H1 031V138 SNOISSIWO NO S10V'SJNINV1N30Nn ANV 60 '1,113l,131,11 S1O3H3O Arw HO '3IV8ado 613Hm1tl3 HO NOIIV83dO H13H1 HO '30831d Ag MOS S101`1008d 83H10 80 S31011 -13A 01103dS38 H11M'All1`103 80 MV7 d0 AHO3Hl H3HIO 80 (A1€119V1110MIS ONV 30N301193N �JN1omONI) 18O1 'A1NV88VM'1OV81N00 30 HOV388 d01n0'JNISIHV N3H13HM 'H3A3OS1VHM SBOVAVO 3AI11Nnd 80'103810NI'1tliO3dS'1V1N3C]IONI '1VI1N3n03SN00 ANV 803 318tl11 38 30H31d 11VHS IN3A3 ON NI 'i0Ang pue K)JO'd u00Ag0q luawaaj6e Ave ul jo u!ajaq A)wlaoa 04; at 6u!4IAve 6u!puejs41MON 'S30VWVO IViN3(110N113NV IVIINM 3SN00 40 NOISMOX3 '4 -ALN"NVM 30 HOV3N9 ANV NOd AC3I138 3705 CNV 3AIsmox3 31-1131311VHS A031N38 SIHI -JilRd Aq 6uguM w aauenpe u! paAwdde Al!lpet e Aq Alun apew aq le4s luawaoeldaj jo neda8 'sped an!pojap jo 6u!wjojuo3uou Aue (asuadxo pue uogdo s•aoja!d le) soeldaj jo medal !legs aoja!d 'awq algeuoseaj a uq!m 'uopepodsuejl 6uunp pnpajd a4l at a5ewup ja ja seal jo >Isi joj pue'uogepodsueq 4ons jo lsOa a4l joj olq!suodsaj aq yells joAng j!edaj jojpue uogeu!wexo joj jaAng Aq aoja'd at powntaj oq pegs pnpmd angoajap A!pa6a!!e Aue'aaja!d jo lsanbaj out 1V 'lua6e paleu6!sap sl! jo aaje!d Aq uogoodsui jol algel!l:ne lonpwd a4l DIM !legs pue 'I ydej6ejed u! pagpilds pouad awg a4I u!gj!m oojaad Algou lsnw joAnS'aoueualu!ew jedwdwi jo luoppoe 'pal69u ,esns!w of anp jou sl Al!uuoluoouou flans pue 'pouad Alueuem o4l 6uunp ; 4dw6wed ui ypol les Alue»em 04; o; wjojum of s!!ej pnpad ugl11 'Ap3W3a 3AISMOX3 5,213Al18 T '3aV81 30 sEmn 80 VNI1V30 30 3s8noo woad ONIsINV S311NV8HVM ANV ONV'3SOdund NV1noujvd V NOd SS3Nlld 301.1NVH8VM ANV 'Ail11gtl1NVH0H3V4 30 A1N"HVM ANV NOI1tll11N1I 1nOH11M ONIC010NI 'AHOln1V1S 80 O311dNd 'SS38dX3 N3H13HM'S3IINVNNVM 83HIO 11V s3amon (1NV SAff7:)SIC A9383H 30831d -3083!d Ag NSAID AINV88VM 3AISm0X3 aAPd 3105 3H1 SI 1 Hd"DV8ed NI H180-1 13S ) INVNNVM 3H1 S31INV11"M 30 SPlMMIDSI© Z 'A;ueuem s14; p!OA Aew aa)a!d 10 u0ge7u04;ne aql ln04;!m ajnpe)nuew jape pappe sped joipeuualle jo suogejalle 'suageay!pow 'sj!edaj AuV 'AI!I!gedeo lea!uynol of se aOua!d Aq paMidde uaaq jou se4 go!gm Ajg!oej a je (q) jo auawpedaa oDjn uS jawo;sn0 aaja!d 04110 lenojdde uotlum loud 4no4j!m (e} pa7e!daj jo paj)edaj s! pnpoud a4l j! Alajpua Ell U1 jo ped u! A;uejjem s!41 p!on Aew jaseyajnd leu!6uo a41 'aajeld Aq pauuoljad si Algwasse a41 ssalun saprgan jo slonpwd bu!4s!ug oju! saggwassegns jo sped sl! In Algwasse aql joj Alg!gsuodsaj cu sawnsse aaja!d sglnq 746!l pue sle3se6'spmy'saj!l'al pajrwll lou lnq'6wpnpu!'pouad Awejuem a4l 6uunp pooe!daj aq o; ane4 pue Ina mam asjnoo Ajeu!pjo ayl u! Aew g3!4m sped jo spnpojd (p) jo :pajnpejnuew sem;! 4o!4m joj asodjnd )a A!!I!gels'aaueuuojjad aql spejje AlasioApe 'a9ja!d jo juaw6pnl alas 041 w'ga!gm aaja!d ue41 J0410 Ai!lua ja uusjad Ave Aq Aem Aue ui palgwosse jo pwalle 'pajredaj uaoq seg 11241 Ajossaaae w juow4oelle'ped luauodwaa )o s!sse4O '0I0!gaA Aue (a) :lou in jem 'pool] 'I!e4 'upojspu!m ' a>lenbgpea '6u!ul45g 'jalses!p lejnleu se 4Dns ajna(ew aajoj jwgsm 'juap!aoe'aoueua;u!ew jadojdwi 'Iuowuoj!nua o!ppe'suog!puon lea!waga jo leluawuo)!nua ajanas of ajnsodxa'ajg ';oal6au'asns!w Aq po6ewep A,osso3ne jo ju0w4oelle'ped'luauodwaa jo'srssegO'ap qan Ave (q) 'Ima4l sjajnpelnuew an!Ioadsej 94I Aq apew 'Aue p 'sequajjem olgeogdde aqj jaAne of u6!sse pegs aoja!d 'sapassaooe pue sjuaw4oe11e'sluauodwao 'sped flans Ile a1 loadsoj 4l!m'sjalejouab pue sdwnd jalem'salxe 'sau!lanup 'suo!ss!wsuejl'sau!5ua at pajwy tau Inq 6u!pnlou!'aoj0!d Aq pampejnuew leu ale leol pnpo,d ayl al ja jo sauossaaoe ape); jo sjuawgaepe 'sluauodwoa 'sued le)6alu! Ave (e) :at se janaoste4M AjuejjeM ov sa>lew aoja!d 'waja4 IUCAUoa a4; 0; 6w4j6ve 6u!puu;s4l!mloN 6000`dM O W/g1z A111N3 80 NOS83d 83HiO ANV Ol 80 N3SVH0Nnd 80 N35n 1N3n03sens ANV Ol N3An9 3Hi Ag a3NN3dSNVH1 351MH3H10 NO 03NOISSV 3g ION AVW UNV88VM a311W11 SIHI 'pavad Aluejjem o4j In uogej!dxa a4l of joud luaea 61112 u! lnq '1,j0n03s1p ja alep a4l nage sAep (00 Ap€41 u!yl!* bu!Ipm u! eaja!d Ajgou )snw l! 'Apwjoluoouou jo laajap a sjanoos!p joAng a4111 'asn Injamo wail lInsaj A!lewjau ueq; jolew6 slaudwi jo sassajls of lanpojd aql laafgns jou sanp go�gm aowas sueaw oo!mas !ewjoN 'lapow jepja!ped aq1 01 !euuou si goi4m ao!njas ul poso s! pue slenuew pue suogonjlsu! aOueualu!ew s,90ja!d 4j!m anuepj000e u! pou!elwew Apadojd si pnpwd Dill j! Aluo Aldde I!e4s AlueuLm paj!wg S!4 i •uorsouoo Aq pasnea a6ewep at Aldde too Reap Aluej)em s!ql b nj41 Z sydej6ejed •5nlejeddy onosad pue ai!d a4l joj suogea!j!nads osEV aas owa!d aq] ur papguap! se gapow atonjaA 041;o Apoq 04110 sluauodwoo lejnlonjjs jugjo pue sajnjonjls 6uqunow :suo!snl3x3 pue ljoddns jejngnj Apoq aqt at Alua sarldde AtuejjeM s!yl pue suwl!pu07 Sam 000'00L :ja1jV sPa3 J0 polled AlueLep/i sjeaA I , t) 1101 (Ajojoej a4l wail sd!4s tonpad au!6aS Aluew eM a4l ua4m panss!) aa!onu! asu4ajnd !eu!6ljo 041 jo a;ep eq1 d!4sueLuVom pue tepalew ul sloajap Aq pasnea sawn !e ejn ani s wail aaj a e s A snlejedde a I l l 1 l N j g II 4 Pag 4i :a6ejano� :joAnS o4l of Alueuem 6wmajlaj ay; sop!nojd 6uunpejnuep4 eoja!d 'molaq 4poj las suo!snpxa pue suogel!wel agj of InalgnS AIUL>JJeM pa1iW1.-1 Apog sn}eaeddV A41.J6alul je m4oru;S 'e9A (0 0 ual sn;e.jeddV anosaH pue wi j It A1NVNNVM 03.11W113 8-105 Fire and Rescue Apparatus Ten (10) Year Material and Workmanship Pierce 12V LED Strip Light Wa�vwwvyF 1. LIMITED WARRANTY Subject to the limitations and exclusions set forth below, Pierce Manufacturing provides the following warranty to the Buyer This limited warranty shall apply only if the product is properly maintained in accordance with Pierce's maintenance instructions and manuals and is used in service which is normal to the particular model. Normal service means service which does nol subject the product to stresses or impacts greater than normally result from careful use. If the Buyer discovers a defect or nonconformity, it must notify Pierce in writing within thirty (30) days after the date of discovery, but in any event prior to the expiration of the warranty period. THIS LIMITED WARRANTY MAY NOT BE ASSIGNED OR OTHERWISE TRANSFERRED BY THE BUYER TO ANY SUBSEQUENT USER OR PURCHASER OR TO ANY OTHER PERSON OR ENTITY. 7/5/2011 WA0203 Notwithstanding anything to the contrary herein. Pierce makes no warranty whatsoever as lo: (a) any integral parts. components, attachments or trade accessories of or to the product that are not manufactured by Pierce, including but not limited to engines, transmissions. drivelmes, axles, water pumps and generators; with respect to all such parts, components, attachments and accessories. Pierce shall assign to Buyer the applicable warranties, if any, made by the respective manufacturers thereof; (b) any vehiclo, chassis, or component, part, attachment or accessory damaged by misuse, neglect, fire, exposure to severe environmental or chemical conditions, acidic environment, improper maintenance, accident, crash, or force majeure such as natural disaster. lightning, earthquake, windstorm. hi flood. war or riot: (c) any vehicle, chassis or component, part, attachment or accessory [hat has been repaired, altered or assembled in any way by any person or entity other than Pierce which, in the sole judgment of Pierce, adversely affects the performance. stability or purpose for which it was manufactured; or (d) Products or parts which may in the ordinary course wear out and have to be replaced during the warranty period, including, but not limited to, fires, fluids, gaskets and light bulbs Pierce assumes no responsibility for the assembly of its parts or subassemblies into finishing products or vehicles unless the assembly is performed by Porce- The original purchaser may void this warranty in part or in its entirety if the product is repaired or replaced (a) without prior written approval of the Pierce Customer Service Department; or (b) at a facifity which has not been approved by Pierce as to technical capability. Any repairs, modifications, alterations or aftermarket pars added after manufacture without the authorization of Pierce may void this warranty. 2. DISCLAIMERS OF WARRANTIES THE WARRANTY SET FORTH IN PARAGRAPH 1 IS THE SOLE AND EXCLUSIVE WARRANTY GIVEN BY PIERCE. PIERCE HEREBY DISCLAIMS AND EXCLUDES ALL OTHER WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY, ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, AND ANY WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE. 3. BUYER'S EXCLUSIVE REMEDY. If the pros fads to conform to the warranty set forth in paragraph 1 during the warranty period, and such nonconformity is not due to misuse. neglect, accident or improper maintenance, Buyer must notify Pierce within the time period specified in paragraph 1, and shall make the product available for inspection by Pierce or its designated agent. At the request of Pierce, any allegedly defective product shall be returned to Pierce by Buyer for examination andlor repair. Buyer shall be responsible for the cost of such transportation, and for risk of less of or damage to the product during transportation. Within a reasonable time. Pierce shall repair or replace (at Pierce's option and expense) any nonconforming of defective parts. Repair or replacement shall be made only by a facility approved in advance in writing by Pierce. THIS REMEDY SHALL BE THE EXCLUSIVE AND SOLE REMEDY FOR ANY BREACH OF WARRANTY. 4, EXCLUSION OF CONSEQUENTIAL AND INCIDENTAL DAMAGES. Notwithstanding anything to the contrary herein or in any agreement between Pierce and Buyer, IN NO EVENT SHALL PIERCE BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL. SPECIAL. INDIRECT, OR PUNITIVE DAMAGES WHATSOEVER, WHETHER ARISING OUT OF BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE AND STRICT LIABILITY) OR OTHER THEORY OF LAW OR EQUITY, WITH RESPECT TO VEHICLES OR OTHER PRODUCTS SOLD BY PIERCE. OR THEIR OPERATION OR FAILURE TO OPERATE, OR ANY DEFECTS THEREIN, OR ANY UNDERTAKINGS, ACTS OR OMISSIONS RELATED THERETO. REGARDLESS OF WHETHER PIERCE HAS BEEN INFORMED OF THE POSSIBILITY OF ANY SUCH DAMAGES- Without limiting the generality of the foregoing, Pierce specifically disclaims any liability for property or personal injury damages. penalties. damages for lost profits or revenues, loss of vehicles or products or any associated equipment, cost of substitute vehicles or products. down-time, delay damages. any other types of economic loss, or for any claims by any third party for any such damages. Note. Any Surefy Bond, if a pari of the safe of the vehicle as to which this 1i warranty is provided. applies only to this Pierce Basic One Year banded Warranty for such vehicle, and not to other warranties made by Pierce in a separate document (if any) or 10 the warranties fit any) made by any manufacturer (Other than Pierce) of any part, component, attachment or accessory that is incorporated into or attached to the vehicle. 8-106 This limited warranty covers repairs to correct any defect Coverage: related to materials or workmanship of the Pierce 12V LED strip lights installed an the apparatus occuring during the warranty period. The date of the original purchase invoice (issued when the Warranty Begins: product ships from the factory). Warranty Period Ends After: Ten (10) Year Conditions and Exclusions: This limited warranty does not apply to related wire See Also harnesses, cables, and connectors, which are covered by the Pierce one (1) year basic apparatus limited warranty. Paragraphs 2 thru 4 This limited warranty shall apply only if the product is properly maintained in accordance with Pierce's maintenance instructions and manuals and is used in service which is normal to the particular model. Normal service means service which does nol subject the product to stresses or impacts greater than normally result from careful use. If the Buyer discovers a defect or nonconformity, it must notify Pierce in writing within thirty (30) days after the date of discovery, but in any event prior to the expiration of the warranty period. THIS LIMITED WARRANTY MAY NOT BE ASSIGNED OR OTHERWISE TRANSFERRED BY THE BUYER TO ANY SUBSEQUENT USER OR PURCHASER OR TO ANY OTHER PERSON OR ENTITY. 7/5/2011 WA0203 Notwithstanding anything to the contrary herein. Pierce makes no warranty whatsoever as lo: (a) any integral parts. components, attachments or trade accessories of or to the product that are not manufactured by Pierce, including but not limited to engines, transmissions. drivelmes, axles, water pumps and generators; with respect to all such parts, components, attachments and accessories. Pierce shall assign to Buyer the applicable warranties, if any, made by the respective manufacturers thereof; (b) any vehiclo, chassis, or component, part, attachment or accessory damaged by misuse, neglect, fire, exposure to severe environmental or chemical conditions, acidic environment, improper maintenance, accident, crash, or force majeure such as natural disaster. lightning, earthquake, windstorm. hi flood. war or riot: (c) any vehicle, chassis or component, part, attachment or accessory [hat has been repaired, altered or assembled in any way by any person or entity other than Pierce which, in the sole judgment of Pierce, adversely affects the performance. stability or purpose for which it was manufactured; or (d) Products or parts which may in the ordinary course wear out and have to be replaced during the warranty period, including, but not limited to, fires, fluids, gaskets and light bulbs Pierce assumes no responsibility for the assembly of its parts or subassemblies into finishing products or vehicles unless the assembly is performed by Porce- The original purchaser may void this warranty in part or in its entirety if the product is repaired or replaced (a) without prior written approval of the Pierce Customer Service Department; or (b) at a facifity which has not been approved by Pierce as to technical capability. Any repairs, modifications, alterations or aftermarket pars added after manufacture without the authorization of Pierce may void this warranty. 2. DISCLAIMERS OF WARRANTIES THE WARRANTY SET FORTH IN PARAGRAPH 1 IS THE SOLE AND EXCLUSIVE WARRANTY GIVEN BY PIERCE. PIERCE HEREBY DISCLAIMS AND EXCLUDES ALL OTHER WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY, ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, AND ANY WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE. 3. BUYER'S EXCLUSIVE REMEDY. If the pros fads to conform to the warranty set forth in paragraph 1 during the warranty period, and such nonconformity is not due to misuse. neglect, accident or improper maintenance, Buyer must notify Pierce within the time period specified in paragraph 1, and shall make the product available for inspection by Pierce or its designated agent. At the request of Pierce, any allegedly defective product shall be returned to Pierce by Buyer for examination andlor repair. Buyer shall be responsible for the cost of such transportation, and for risk of less of or damage to the product during transportation. Within a reasonable time. Pierce shall repair or replace (at Pierce's option and expense) any nonconforming of defective parts. Repair or replacement shall be made only by a facility approved in advance in writing by Pierce. THIS REMEDY SHALL BE THE EXCLUSIVE AND SOLE REMEDY FOR ANY BREACH OF WARRANTY. 4, EXCLUSION OF CONSEQUENTIAL AND INCIDENTAL DAMAGES. Notwithstanding anything to the contrary herein or in any agreement between Pierce and Buyer, IN NO EVENT SHALL PIERCE BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL. SPECIAL. INDIRECT, OR PUNITIVE DAMAGES WHATSOEVER, WHETHER ARISING OUT OF BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE AND STRICT LIABILITY) OR OTHER THEORY OF LAW OR EQUITY, WITH RESPECT TO VEHICLES OR OTHER PRODUCTS SOLD BY PIERCE. OR THEIR OPERATION OR FAILURE TO OPERATE, OR ANY DEFECTS THEREIN, OR ANY UNDERTAKINGS, ACTS OR OMISSIONS RELATED THERETO. REGARDLESS OF WHETHER PIERCE HAS BEEN INFORMED OF THE POSSIBILITY OF ANY SUCH DAMAGES- Without limiting the generality of the foregoing, Pierce specifically disclaims any liability for property or personal injury damages. penalties. damages for lost profits or revenues, loss of vehicles or products or any associated equipment, cost of substitute vehicles or products. down-time, delay damages. any other types of economic loss, or for any claims by any third party for any such damages. Note. Any Surefy Bond, if a pari of the safe of the vehicle as to which this 1i warranty is provided. applies only to this Pierce Basic One Year banded Warranty for such vehicle, and not to other warranties made by Pierce in a separate document (if any) or 10 the warranties fit any) made by any manufacturer (Other than Pierce) of any part, component, attachment or accessory that is incorporated into or attached to the vehicle. 8-106 Fire and Rescue Apparatus Ten (10) Year Material and Workmanship Stainless Steel Piping Limited Warranty 1. LIMITED WARRANTY Subject to the firrntill and exclusions set forth below, Pierce Manufacturing provides the following warranty to the Buyer: This limited warranty shall apply only d the product is properly maintained to accordance with Pierce's maintenance instructions and manuals and is used in service which is normal to the particular model. Normal service means service which does not subject the product to stresses or impacts greater than normally result from careful use. If the Buyer discovers a defect or nonconformity, it must notify Pierce in writing within thirty (30) days after the date of discovery, but in any evenl prior to the expiration of the warranty period. THIS LIMITED WARRANTY MAY NOT BE ASSIGNED OR OTHERWISE TRANSFERRED BY THE BUYER TO ANY SUBSEQUENT USER OR PURCHASER OR TO ANY OTHER PERSON OR ENTITY. 3/22/2012 WA0035 Notwithstanding anything to the contrary herein. Pierce makes no warranty whatsoever as to. (a) any integral parts, components, attachments or trade accessones of or to the product that are not manufactured by Pierce, including but not limited to engines, transmissions. driveiines, axles, water pumps and generators; with respect to all such parts. components, attachments antl accessories. Pierce shall assign to Buyer the applicable wamanhes, if any, made by the respective manufacturers thereof; (b) any vehicle, chassis, or component, part. attachment or accessory damaged by misuse, neglect. fire. exposure to severe environmental or chemical conditions, acidic environment, improper maintenance, accident, crash. or force majeure such as natural disaster, lightning. earthquake, windstorm. hail, flood. war or not. (c) any vehicle, chassis or component, part, attachment or accessory that has been repaired, altered or assembled in any way by any person or entity other than Pierce which, in the sole lodgment of Pierce, adversely affects the performance, stability or purpose for which it was manufactured; or (d) products or parts which may in the ordinary course wear out and have to be replaced during the warranty period, including, but not limited to, tires, fluids. gaskets and light bulbs. Pierce assumes no responsibility for the assambly of its parts or subassemblies into finishing products or vehicles unless the assembly is performed by Pierce. The original purchaser may void this warranty in part or in its entirely iF the product is repaired or replaced (a) without prior written approval of the Pierce Customer Service Depadmi or (b) at a facility which has not been approved by Pierce as to technical captill Any repairs, modifications, alterations or aftermarket parts added after manufacture without the authorization of Pierce may void this warranty. 2 DISCLAIMERS OF WARRANTIES THE WARRANTY SET FORTH IN PARAGRAPH 1 IS THE SOLE AND EXCLUSIVE WARRANTY GIVEN BY PIERCE. PIERCE HEREBY DISCLAIMS AND EXCLUDES ALL OTHER WARRANTIES, WHETHER EXPRESS, fMPLIED OR STATUTORY, iNCLUDfNG WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY, ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, AND ANY WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE 3. BUYER'S EXCLUSIVE REMEDY. if the product fads to conform to the warranty set forth in paragraph 1 during the warranty period, and such nonconformity is not due to misuse. neglect. accident or improper maintenance. Buyer must notify, Pierre within the time period specified in paragraph 1. and shall make the product available for inspection by Pierce or its designated agent. At the request of Pierce, any allegedly defective product shall ba returned to Pierre by Buyer for examination andror repair. Buyer shall be responsible for the cost of such transportation, and for risk of foss of or damage to the product during transportation. Within a reasonable time, Pierce shall repair or replace (at Pierce's option and expense) any nonconforming or defective parts. Repair or replacement shall be made only by a facility approved in advance in writing by Pierce. THIS REMEDY SHALL BE THE EXCLUSIVE AND SOLE REMEDY FOR ANY BREACH OF WARRANTY. 4. EXCLUSION OF CONSEQUENTIAL AND INCIDENTAL DAMAGES. Notwithstanding anything to the contrary herein or in any agreement between Pierce and Buyer, IN NO EVENT SHALL PIERCE BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL. SPECIAL. INDIRECT. OR PUNITIVE DAMAGES WHATSOEVER, WHETHER ARISING OUT OF BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE AND STRICT LIABILITY) OR OTHER THEORY OF LAY. OR EQUITY, WITH RESPECT TO VEHICLES OR OTHER PRODUCTS SOLD BY PIERCE, OR THEIR OPERATION OR FAILURE TO OPERATE, OR ANY DEFECTS THEREIN. OR ANY UNDERTAKINGS. ACTS OR OMISSIONS RELATED THERETCi REGARDLESS OF WHETHER PIERCE HAS BEEN INFORMED OF THE POSSIBILITY OF ANY SUCH DAMAGES- Without hmihng the generality of the foregoing, Pierce specifically disclaims any IiabiGty for properly or personal injury damages, penalties, damages for lost profits or revenues, less of vehicles or products or any associated equipment, cost of substitute vehicles or products, down-time, delay damages, any other types of economic loss, or for any claims by any third party for any such damages. Note_ Any Surely Bond, if a pad of he sale of the vehicle as to which this limited warranty is provided, applies only to Ibis Pierce Basic One Year Limned Warranty for such vehicle, and not to other warranties made by Pierce in a separate document (if any) or to the warranties Many) made by any manufacturer lolher than Piarl of any pad, component, attachment or accessory that is ecorporaled into or attached to the vehicle. Stainless steel piping shall be free from stmctu nal failures Coverage: caused by defecis in material and workmanship, or perforation caused by corrosion_ Warranty Begins: The date of the original purchase invoice (issued when the product ships from the factoryl. Warranty Period Ten (10) Years Ends After: • air - 1000.000 Miles Pierce's obligation under this warranty is limited to repairing or replacing without charge, as Pierce may elect, the Conditions and stainless steel piping or components which Pierce Exclusions: determines to have failed due to detective material and workmanship, or perforation caused by corrosion. See Also Paragraphs This warranty does not cover the use of fluoroprolein {FP) 2 thru 4 type loam. The sodium chloride within FP foam can cause long-term damage to system components if not thoroughly flushed immediately after use. This limited warranty shall apply only d the product is properly maintained to accordance with Pierce's maintenance instructions and manuals and is used in service which is normal to the particular model. Normal service means service which does not subject the product to stresses or impacts greater than normally result from careful use. If the Buyer discovers a defect or nonconformity, it must notify Pierce in writing within thirty (30) days after the date of discovery, but in any evenl prior to the expiration of the warranty period. THIS LIMITED WARRANTY MAY NOT BE ASSIGNED OR OTHERWISE TRANSFERRED BY THE BUYER TO ANY SUBSEQUENT USER OR PURCHASER OR TO ANY OTHER PERSON OR ENTITY. 3/22/2012 WA0035 Notwithstanding anything to the contrary herein. Pierce makes no warranty whatsoever as to. (a) any integral parts, components, attachments or trade accessones of or to the product that are not manufactured by Pierce, including but not limited to engines, transmissions. driveiines, axles, water pumps and generators; with respect to all such parts. components, attachments antl accessories. Pierce shall assign to Buyer the applicable wamanhes, if any, made by the respective manufacturers thereof; (b) any vehicle, chassis, or component, part. attachment or accessory damaged by misuse, neglect. fire. exposure to severe environmental or chemical conditions, acidic environment, improper maintenance, accident, crash. or force majeure such as natural disaster, lightning. earthquake, windstorm. hail, flood. war or not. (c) any vehicle, chassis or component, part, attachment or accessory that has been repaired, altered or assembled in any way by any person or entity other than Pierce which, in the sole lodgment of Pierce, adversely affects the performance, stability or purpose for which it was manufactured; or (d) products or parts which may in the ordinary course wear out and have to be replaced during the warranty period, including, but not limited to, tires, fluids. gaskets and light bulbs. Pierce assumes no responsibility for the assambly of its parts or subassemblies into finishing products or vehicles unless the assembly is performed by Pierce. The original purchaser may void this warranty in part or in its entirely iF the product is repaired or replaced (a) without prior written approval of the Pierce Customer Service Depadmi or (b) at a facility which has not been approved by Pierce as to technical captill Any repairs, modifications, alterations or aftermarket parts added after manufacture without the authorization of Pierce may void this warranty. 2 DISCLAIMERS OF WARRANTIES THE WARRANTY SET FORTH IN PARAGRAPH 1 IS THE SOLE AND EXCLUSIVE WARRANTY GIVEN BY PIERCE. PIERCE HEREBY DISCLAIMS AND EXCLUDES ALL OTHER WARRANTIES, WHETHER EXPRESS, fMPLIED OR STATUTORY, iNCLUDfNG WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY, ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, AND ANY WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE 3. BUYER'S EXCLUSIVE REMEDY. if the product fads to conform to the warranty set forth in paragraph 1 during the warranty period, and such nonconformity is not due to misuse. neglect. accident or improper maintenance. Buyer must notify, Pierre within the time period specified in paragraph 1. and shall make the product available for inspection by Pierce or its designated agent. At the request of Pierce, any allegedly defective product shall ba returned to Pierre by Buyer for examination andror repair. Buyer shall be responsible for the cost of such transportation, and for risk of foss of or damage to the product during transportation. Within a reasonable time, Pierce shall repair or replace (at Pierce's option and expense) any nonconforming or defective parts. Repair or replacement shall be made only by a facility approved in advance in writing by Pierce. THIS REMEDY SHALL BE THE EXCLUSIVE AND SOLE REMEDY FOR ANY BREACH OF WARRANTY. 4. EXCLUSION OF CONSEQUENTIAL AND INCIDENTAL DAMAGES. Notwithstanding anything to the contrary herein or in any agreement between Pierce and Buyer, IN NO EVENT SHALL PIERCE BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL. SPECIAL. INDIRECT. OR PUNITIVE DAMAGES WHATSOEVER, WHETHER ARISING OUT OF BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE AND STRICT LIABILITY) OR OTHER THEORY OF LAY. OR EQUITY, WITH RESPECT TO VEHICLES OR OTHER PRODUCTS SOLD BY PIERCE, OR THEIR OPERATION OR FAILURE TO OPERATE, OR ANY DEFECTS THEREIN. OR ANY UNDERTAKINGS. ACTS OR OMISSIONS RELATED THERETCi REGARDLESS OF WHETHER PIERCE HAS BEEN INFORMED OF THE POSSIBILITY OF ANY SUCH DAMAGES- Without hmihng the generality of the foregoing, Pierce specifically disclaims any IiabiGty for properly or personal injury damages, penalties, damages for lost profits or revenues, less of vehicles or products or any associated equipment, cost of substitute vehicles or products, down-time, delay damages, any other types of economic loss, or for any claims by any third party for any such damages. Note_ Any Surely Bond, if a pad of he sale of the vehicle as to which this limited warranty is provided, applies only to Ibis Pierce Basic One Year Limned Warranty for such vehicle, and not to other warranties made by Pierce in a separate document (if any) or to the warranties Many) made by any manufacturer lolher than Piarl of any pad, component, attachment or accessory that is ecorporaled into or attached to the vehicle. 19i 4,e� I# Ifil T - FAMILY OWNED SINCE 1958 Pierce Mfg Oshkosh Corporation 1512 38'h Ave East Bradenton, FL 34208 TRUCK SALES + SERVICE • PARTS ' LEASING 2401 PROGRESS WAY • KAUKAUNA, WT 54130-9559 920.766.5222 1 FAX 920.766.5299 • TOLL FREE 800-236.5271 W WW.TRUCKCOUNTRY.0011A 1/30/19 Freightliner M2106, M2112, 108SD and 114SD base spec chassis GVW ordered through 9/30/2019 by Pierce Manufacturing and delivered to Pierce Manufacturing by 12/31/2019 carry an extended basic vehicle warranty. The M2106 and the 108SD will carry a 3Yr/100,000 mile basic vehicle warranty. The M2112 and 1145D will carry a 3Yr / 100,000 mile basic vehicle warranty. This warranty is limited to a chassis domiciled within the United States and Canada. FXP base spec GVW units domiciled in Canada will carry an extended 3Yr/100,000 mile basic vehicle warranty. FXP base spec GVW units domiciled in the United States will carry an extended 5Yr/100,000 mile basic vehicle warranty. Please let me know if you require any additional information. Regard f i f� 30 ra --i/ �fre-ctor of Corporate Accoun IS Warranty Coverage Exclusions EXCLUSIONS The following components, parts, or conditions, are specifically excluded from coverage under this Warranty. AIR COMPRESSORS, ENGINE BRAKES, AND OTHER PROPRIETARY ENGINE COMPONENTS The engine manufacturer installs most air compressors and engine brakes. Any failure of a proprietary engine component or Jacob'" Brake component must be filed directly to the engine manufacturer. Failures on non-proprietary components can be filed through Daimler Trucks North America LLC Dealers. AIR SPRINGS Tolerance buildup can occur during the assembly process of the rear suspension and rear cab air springs, and can cause the springs to have the appearance of being crooked, misaligned or improperly installed. This tolerance buildup is not detrimental to the operation of the vehicle and will not have an affect on either the quality of the ride or the durability of the components or vehicle. Straightening of these springs is not covered under this Warranty. ALIGNMENT OF AXLES/WHEELS/STEERING WHEEL Each Daimler Trucks North America vehicle manufacturing plant uses an integrated alignment system to align axles and wheels and to center the steering wheel to Daimler Trucks North America LLC specifications. Realignment or readjustment of these items is not covered under warranty. Any special alignment settings at the request of the Owner must be handled between the Dealer and Owner after delivery from factory. These special adjustments are not covered under Warranty. AXLE BREATHER VENTS During the vehicle manufacturing process, an oil run or drip stain may appear at the breather vent. Removing the vent, applying pipe sealant to the threaded vent fitting and re -installing the vent is unnecessary. Removing the axle breather vent and re -sealing the threaded fitting is not covered under this Warranty. CAB INTERIOR COMPONENTS The repair or replacement of cab interior components that are rendered unserviceable due to normal wear or abuse are not covered under this warranty. These components include, but are not limited to: Upholstery Floor coverings (including floor mats) Curtains Window shades Steering wheel Steering wheel wrap Painted trim components CHROME SURFACES, ALUMINUM AND STAINLESS STEEL COMPONENTS The following items ARE covered under this Warranty: Chrome peeling off in sheets Chrome cut at mounting bolts due to over -torque at the factory Bubbles in the chrome that are not caused by rock chips and/or general rust conditions Isolated rust along seams or welds The following items are NOT covered under this Warranty: General rust, for example, rust on the unfinished backside of a bumper Dimpling at the mounting bolts Staining, bluing, and/or yellowing that can be cleaned with a quality cleaning - product Rust, pits, and/or nicks caused by road wash or road debris breaking the chrome surface Streaks/stains/corrosion caused by severe wash solutions or corrosive road salts/chemicals Claims pertaining to failures of chrome surfaces, aluminum, and stainless steel components will not be processed unless a clear digital picture is provided that adequately shows the defect. CLUTCH ADJUSTMENT Clutch adjustments are normally required due to clutch wear and are considered normal maintenance. However, if the clutch adjustment is found to be outside of Company specifications during, or prior to, in-service of the vehicle, a warranty claim will be accepted on a one-time basis. Claims for clutch adjustments will not be accepted unless the adjustment is found to be outside of Company specifications using the special clutch adjustment measuring tools provided by Company (e.g., adjusting the clutch to satisfy feel will not be accepted as warranty). COMPETITION Warranty will become void on any vehicle that is used in competition, including but not limited to: Racing Tractor pulls Other motor sports Daimler Trucks North America LLC CONSUMABLE PARTS Parts that are subject to consumption during their normal service life and are routinely replaced during normal maintenance services are covered up to 15,000 miles (24 OOOkm) for all Daimler Trucks North America LLC vehicles except Thomas Built Bus (TBB) bodies and chassis. TBB consumable parts are covered up to 30 days from the date of in-service. These items are: Antennas Fire extinguishers Caps (radiator, surge, Ashtrays Fluorescent ballast and fuel tank) Belts tubes Receiver -dryer filter Brake linings Fuses Trailer air hoses Cigarette lighter Gladhand Trailer electrical cables assembly Hosetennas Windshield washer Clutch brake Light bulbs nozzles Clutch linings Mattresses Wiper arms and blades Data logger Mud flaps JBB makes -Der blades batteries Mud flap mounting only) Desiccant brackets cartridges Consumable parts NOT covered under this Warranty include, but are not limited to, the following: Antifreeze Fluids (unless low due to a warrantable failure) Filters (fuel, air, oil, Lubricants water) CORROSION Coverage provides warranty against corrosion to any metal or metal alloy part of the vehicle. Rust or corrosion to specific components and/or caused by certain conditions are excluded from all Company warranty coverage and will not be paid under Basic Vehicle, Cab Structure, Cab Corrosion, or Aftermarket Parts Warranty. Exclusions to corrosion warranty include, but are not limited to, the following: Corrosion caused by general rust (for example, rust on the unfinished backside of a bumper) Surface rust caused by chips or scratches in the paint or chrome surfaces Corrosion caused by high-pressure washing, severe wash solutions, cleaning solvents, detergents, compounds Corrosion caused by salinity in the environment or corrosive salts and/or chemicals used on the road surface. Corrosion caused by acid rain or other industrial fallout Corrosion due to improper prevention measures during storage or use Corrosion or rust on tone rings, rotors or drums (rotor exclusion does not apply to hydraulic discs with Magna -Coat Rotors) Corrosion due to environmental damage (including ocean spray): airborne fallout (includes chemicals, tree sap, etc.), or other atmospheric conditions or other acts of nature Corrosion due to improper use, misuse or abuse, negligence, including improper or insufficient maintenance DAMAGE The following are not covered under this Warranty: Damage caused by use of the vehicle in any application that is not approved or is inconsistent with build specifications Damage resulting from improper use or misuse or abuse, negligence, improper operation, improper or insufficient maintenance (including, but not limited to failure to maintain vehicle as outlined in the driver's/operator's and maintenance manuals), overloading, unauthorized modifications, accidents, or operation at excessive speeds Environmental damage, including airborne fallout (including chemicals, tree sap, etc.), or other atmospheric conditions, hailstones, or other acts of nature Damage caused by road salts/chemicals or cleaning solvents, detergents or compounds Storage deterioration including damage caused by improper or insufficient storage or maintenance Damage caused by road hazards or road conditions Damage caused during shipping/transport after initial delivery of vehicle Damages (including peeling or flaking) caused by high-pressure washing or steam -cleaning Damages occurring after in-service (e.g., from rock chips) Damages caused by customer -installed sealer in air conditioning systems Damages caused by engine horsepower/ torque upgrades. Damage due to vibration associated with misapplication or improper operation of drivetrain components Damage due to terrorist activities Damage due to acts of war ENect ver 3;':5,':0'0 EfCw<io•rc he nforma-ri provided n to -s 1--ent is for general inlormat,on only and s riot offred as customer's vra�ran;y ra's towage may be supe seded xanout notdlcahon. Copyright Daimler Truc,s North Amer e,a LLC. all r.gn%s reSe,,Qa Daimler Tau ks Nortn Ame ,a LLC s a Daum. er -pang. Page ' of . 8-109 Warranty Coverage Exclusions ENGINE The engine, including all of its components as supplied by the manufacturer, is not covered under this Warranty, but is warranted separately by the manufacturer of the engine. For engine warranty or service, contact the engine manufacturer's authorized sales and service facility. EXHAUST SYSTEM CLAMPS During the early life of the vehicle or when the engine is cold, many exhaust clamps exhibit a soot trace. This condition is self-correcting and does not require adjustment, tightening, or replacement of the clamp. Claims for adjusting or tightening will not be paid under warranty. FIFTH WHEELS Adjustment of the locking mechanism, bushings, slide locking plungers, and the repair or replacement of lock guards are considered routine maintenance and are not covered under this Warranty. GLASS, MIRRORS, LENS Glass, mirror or lens breakage or chips or scratches of glass, mirrors, or lenses are not covered by this Warranty. MISAPPLICATION OF VEHICLE The warranty on any vehicle used inconsistent with its specified vocation/application will be downgraded to the warranty that is consistent with the vehicle use. Any and all claims associated with the misapplication of the vehicle will be subject to chargeback. MISCELLANEOUS EXPENSES Premium charges and work not directly related to the repair or replacement of a warranted part are not covered under this Warranty. Examples include, but are not limited to: Federal, state, provincial, and local taxes Travel expenses Loss of revenue Customer labor including overtime labor Downtime Driver's expenses Cost of rental equipment Loss of cargo, including perishable cargo General housekeeping supplies (i.e. rags, solvents, sweeping compounds, coveralls, etc.) Communication charges Towing/road call assistance (unless coverage is specifically stated in the applicable warranty table) • Repair or replacement of optional items not sold or installed by company -Removal or replacement of dealer, body builder, or customer installed equipment Environmental fees, cleanup, or other charges Cost of emergency services. MODIFICATIONS TO ORIGINAL EQUIPMENT Company does not warrant vehicle component or chassis modifications, or equipment installations arranged by Dealers or Customers. In addition, the extra time necessary to remove body builder installed items and/or equipment to work on a warranted repair is not covered under this Warranty unless Company sells the complete chassis/body/equipment as a package. If Dealers or Customers perform any vehicle modifications or equipment installations, to the extent these modifications or equipment installations adversely affect other vehicle components or vehicle performance, Company shall not accept any product liability or claims under the terms of the vehicle warranty. These claims become the sole responsibility of the person performing the modifications or equipment installations. PAINT The following exclusions to paint warranty include, but are not limited to: Complete chassis re -painting to repair paint damages Damages occurring after in-service (e.g., from rock chips) Peeling/flaking caused by high-pressure washing or steam cleaning Rusting of painted bumpers Removal and/or replacement of decals, striping, and/or lettering not applied by Company Specific areas of the vehicle are deliberately not painted or are not painted to any standard; paint repairs are not warrantable to such areas. These areas include: Underside of the hood, including the inside Underside of the exterior of the wheel wells sun visor Inside of the side -mounted air fairings Inside of the bumper Underside of the roof -mounted air fairings Aftertreatment devices Gloss: Gloss Warranty claims pertaining to gloss issues on vehicles painted with low -gloss colors (as identified in the Data Books) are the Dealer's responsibility and will not be honored by warranty. TRANSMISSIONS Allison transmissions and components are covered under this Warranty, but are warranted separately by Allison. Information regarding Allison's warranty is provided for informational purposes only and is subject to change. For warranty or service information, contact Allison's authorized sales and service facility. ROUTINE MAINTENANCE Routine maintenance, servicing, and adjustment, as defined in the applicable Vehicle Maintenance Manual and Driver's Manual, are excluded from Warranty. Daimler Trucks North America LLC Periodic adjustment or re -torque of wheel bearings, wheel lug nuts, and suspension U -bolts are considered maintenance adjustments and are not covered under warranty. Vibrations, squeaks, rattles, loose fittings/clamps, hose fitting leaks, loose nuts/bolts/screws, and loose electrical connections may develop during the initial trip(s) of the vehicle and these types of repairs/adjustments are covered under warranty one time during the following applicable initial operating periods unless excluded in the paragraphs below. Reminder: After the following initial operating periods, these developments are the result of use and their repair/adjustment activities are considered routine maintenance and thus excluded from warranty. INITIAL OPERATING PERIOD The Initial Operating Period (IOP) for Daimler Trucks North America LLC vehicles (except TBB makes) is up to 15,000mi (24 OOOkm), except for FCCC where it is 25,000mi (40 200km). The IOP for Thomas Built Bus (TBB) bodies and chassis is 30 days from the date of In-service. See CONSUMABLE PARTS. Exclusions from warranty during the Initial Operating Period are: Cab, hood, and fender -mounted mirrors are adjusted at the factory but may be retracted by the transporter to prevent damage during transport. Subsequent adjustments and tightening of mirror mounting hardware are considered part of the routine preparation of the vehicle before Customer delivery. Claims for adjusting the mirrors or tightening of the attaching hardware will not be paid under warranty during the initial operating period or after. Claims for re-routing of electrical wiring, hoses, or lines which meet Daimler Trucks North America's routing standards will not be paid under warranty during the initial operating period or after. Final preparation of the vehicle for Customer delivery to include cleaning/vacuuming interior of cab, washing windows, washing the exterior of the vehicle, polishing exterior chromed or painted surfaces are considered as delivering -Dealer responsibilities. Claims for these activities will not be paid under warranty during the initial operating periods or after. TEST VEHICLES Any vehicles being used in testing or used to test specific components must be identified to the Warranty Department and accommodations must be made for claims that relate to the test item(s). Any vehicles used in endurance testing, such as the Altoona Test, are void of all warranty, new or used. TIRES AND TIRE BALANCING The tires are not covered under this Warranty, but are warranted separately by the tire manufacturer. Tire balancing is not covered under warranty. Effect— 3/25;2010 E>CwSCNS Pagc , of Tie informal on Droviaeo :a this aarument s for general nformat on only and is not offe'ea as Custome''s-,var•aaty This Coverage may DC superseoca N 11out notllic.non. Copyright r_ Da,m-ger Thicks North Ame,ci LLC All r:grus reserved. Daimler Trurks Norn Al,—Ca LLC 'S 3 Da,rler Company 8-110 Daimler Trucks North America LLC Dealer Warranty Manual NEW VEHICLE LIMITED WARRANTY WARRANTY COVERAGE DESCRIPTIONS dr WARRANTY COVERAGE TABLES REIGHTLINER EDttrrMTR[N:K Freightliner Medium Truck Coverage' Description TSmeb Distanceb Basic Vehick 2 Years Unlimited Battery I Year 100,000 mi/161 000 km Brightwork 6 Months Unlimited Cab Corrosion/Perforation 5 Years Unlimited Cab Structure 5 Years Unlimited Corrosion 6 Months Unlimited Crossmembers 5 Years Unlimited Diesel Emission 2010` 5 Years 100,000 mi/161 000 km Frame Rails 5 Years Unlimited GHG14d (Light Heavy Duty Trucks) 5 Years 50,000 mi/80 500 km GHG14d (Medium Heavy Duty to Heavy Heavy Duty Trucks) 5 Years 100,000 GHG14d (Medium Heavy Duty to Heavy Heavy Duty Tractors) 5 Years E 100,000 EE GHG14d Tire 2 Years 24,000 mi/38 400 km Hybrid Transmission - Eaton` 3 Years 150,000 mi/240 000 km Paint 1 Year 100,000 mi/161 000 km Paint. Chassis 6 Months Unlimited Front Axle( 2 Years Unlimited Rear Axle 2 Years Unlimited Transfer Case 2 Years Unlimited Transmission' 2 Years Unlimited Detroit Front Axkt (File Dircc9) DISCLAIMER: Failure to read or distribute this information does not provide exemption from compliance with the information contained herein. WAR406 Copyright © Daimler Truck North America LLC. 54 Revised 9/1/15 All rights reserved. Daimler Trucks North America LLC is a Daimler company. 8-111 Daimler Trucks North America LLC Dealer Warranty Manual NEW VEHICLE UMfTED WARRANTY WARRANTY COVERAGE DESCRIPTIONS & WARRANTY COVERAGE TABLES Coverage' Description Timeb Distanceb Post -Model Year 20118 2 Years Unlimited Post -Model Year 201111 4 Years Unlimited Detroit Rear Azle (File Direct) Post -Model Year 20116 2 Years Unlimited Post -Medd Year 201111 4 Years Unlimited Detroit DT -12 Transmiaaione`i 5 Years 750,000 mi/1 200 000 km coverage may vary; check vehicle's actual warranty coverage online via OWL's Coverage Info/Check Coverage screen. Time or distance, whichever comes first Applies to vehicles equipped with EPA 2010 compliant diesel engines. Applies to models 2013 and later domiciled in the United States, check actual warranty online via OWL's Coverage Info/Check Coverage screen for coverage listed as'GHG14._' Customers will have only one (1) type of transmission coverage, depending on how the vehicle is speed. Front axle coverage is also applicable to gliders. Medium Duty - General Service: Warranty coverage is determined by Gross Combination Weight Rating, road surface, and vocation. Please see www.ddcsn.com for specific coverage details. Medium Duty - General Service Plus: Warranty coverage Is determined by Gross Combination Weight Rating, road surface, and vocation. Please see www_ddcsn.com for specific coverage details. Detroit Transmission: Warranty coverage is determined by Gross Combination Weight Rating, road surface, and vocation. Please see www.ddr-sn.com for specific coverage details. DISCLAIMER: Failure to read or distribute this information does not provide exemption from compliance with the information contained herein. W%R406 Copyright V Daimler Truck North America LLC. 55 Revised 9/1/15 All rights reserved. Daimler Trucks North America LLC is a Daimler company. 8-112 Daimler Trucks North America LLC Dealer Warranty Manual NEW VEHICLE LIMITED WARRANTY WARRANTY COVERAGE DESCRIPTIONS & WARRANTY COVERAGE TABLES REtGHTLINER oCATIONAL Freightliner SD Vocational Applicable models: 108.SDII 14SD SD Vocational Coverage is only available for vehicles ordered with the fCummins following engines: B, C, or L SD Vocational Coverage is = available for vehicles in these vocations: Coggin& MiMining,Oilfield Category Determinants Road Surface - most severe in -transit between sites <30% off-highway rough, maintained concrete/asphalt, maintained gravel/crushed rock; maintained dirt or soft soil (Class C or D roads)' GC W 92,000 Ib/41 730 kg or less A=les and Their Manufacturer's GVW Rating 2 -axle unit 46,000 Ib/20 865 kg or less 3 -axle unit 66,000 Ib/29 937 kg or less 4 -axle unit N/A 5 -axle unit N/A a. Class C roads have a natural surface and may be either constructed or established overtime by repeated passage of vehicles. The natural surface may be dirt, sand, or rock. A minimal amount of maintenance, if any at all, Is limited primarily to spot surface grading to allow vehicle passage within the original road corridor. Class D roads are primitive roads that were not constructed but have been established overtime by the passage of motor vehi- cles. These roads receive no maintenance or grading. Coverage' Description Tune Distanceb Basic Vehicle 2 Years Unlimited Battery 1 Year 100,000 mi/161 000 km Brightwork 6 Months Unlimited Cab Corrosion/Perforation 5 Years Unlimited Cab Structure 5 Years Unlimited Corrosion 6 Months Unlimited Crossmembers 5 Years Unlimited Diesel Emission 2010c 5 Years 100,000 mi/161 000 km Frame Rails 5 Years Unlimited GHG 14d (Medium Heavy Duty to Heavy Heavy Duty Trucks) 5 Years 100,000 mi/ 161 000 km GHG14d (Medium Heavy Duty to Heavy Heavy Duty Tractors) 5 Years 100,000 mi/161 000 km GHG14d Tire 2 Years 24,000mi/38 400 km Paint 1 Year 100,000 mi/161 000 km Paint, Chassis 6 Months Unlimited Front Azle` 2 Years Unlimited Rear Azle 2 Years Unlimited D15CLAIMER: Failure to read or distribute this information does not provide exemption from compliance with the information contained herein. WAR406 Copyright m Daimler Truck North America LLC. 56 Revised 9/1/15 All rights reserved. Daimler Trucks North America LLC is a Daimler company. 8-113 Daimler Trucks North America LLC Dealer Warranty Manual NEW VEHICLE LIMITED WARRANTY WARRANTY COVERAGE DESCRIPTIONS & WARRANTY COVERAGE TABLES RE Km n M E RTKI TVnrsTmuAi Coverage` Description Timeb Distanceb Transfer Case 2 Years Unlimited Transmission 2 Years Unlimited Detroit Front Azle` (File Direct) Pre-Modd Year 2011E 2 Years Unlimited Post -Model Year 2011$ 3 Years 300,000 mi/483 000 km Detroit Rear Azle (File Direct) Pre -Model Year 20111 2 Years Unlimited Post -Model Year 20119 3 Years 300,000 mi/483 000 km Coverage may vary; check vehicle's actual warranty coverage online via OWL's Coverage Info/Check Coverage screen. Time or distance, whichever comes first Applies to vehicles equipped with EPA 2010 compliant diesel engines. Applies to models 2013 and later domiciled In the United States, check actual warranty online via OWL's Coverage lnfo/Check Coverage screen for coverage listed as'GHG14,-- Front Axle coverage is also applicable to gliders. Pre -Model Year 2011 Detroit Axle: Warranty coverage is determined by Gross Combination Weight Rating, road surface, and vocation. Please see www.ddcsn.com for specific coverage details. Heavy Duty - General Service: Warranty coverage is determined by Gross Combination Weight Rating, road surface, and vocation. Please see www.ddcsn.com for specific coverage details. DISCLAIMER: Failure to read or distribute this Information does not provide exemption from compliance with the information contained herein. WAR406 Copyright © DalmlerTruck North America LLC. 57 Revised 9/1/15 All rights reserved. Daimler Trucks North America LLC is a Daimler company. 8-114 Daimler Trucks North America LLC Deafer Warranty Manual NEW VEHICLE LIMITED WARRANTY WARRANTY COVERAGE DESCRIPTIONS & WARRANTY COVERAGE TABLES Freightliner Level I REIGNTLiNE1t I Level 1 Coverage is not available for vehicles in these vocations: I Refuse Packer, Logging, Mining, Oi yield Category Determinants Road Surface - most severe in -transit between sites 100% on -highway smooth concrete or asphalt GCW 92,000 lb/41 730 kg or less Axles and Their Manufacturer's GVW Rating 2-ax1e unit 35,000 lb/15 876 kg or less 3 -axle unit 58,000 Ib/26 308 kg or less 4 -axle unit 71,000 Ib/32 205 kg or less 5 -axle unit N/A Coverage' Description Urneb Distanceb Basic Vehicle 1 Year 100,000 mi/161 000 km Bary l Year 100,000 mi/161 000 km Brigbtwork 6 Months Unlimited Cab Corrosion/Perforation 5 Years Unlimited Cab Structure 3 Years 300,000 mi/483 000 km Corrosion 6 Months Unlimited Crossmembers 6 Yeats 750,000 mil 1207 000 km Diesel Emission 2010` 5 Years 100,000 mi/ 161 000 km Frame Rails 6 Years 750,000 mill 207 000 km GHG14d (Medium Heavy Duty to Heavy Heavy Duty Trucks) 5 Years 100,000 mi/161 000 km GHG14d (Medium Heavy Duty to Heavy Heavy Duty Tractors) 5 Years 100,000 mi/ 161 000 km GHG14d Tire 2 Years 24,000mi/38 400 km Paint 1 Year 100,000 mi/161 000 km Paint, Chassis 6 Months Unlimited Front Axle` 3 Years 300,000 mi/483 000 km Rear Azle 3 Years 300,000 mi/483 000 km Transfer Case 3 Years 300,000 mi/483 000 km Transmission 3 Years 300,000 mi/483 000 km Detroit Front Axle (File Direct) Post -Model Year 20111 2 Years Unlimited Post -Model Year 20119 3 Years 300,000 mi/483 000 km Post Model Year 2010 5 Years 750,000 mi/ 1 200 000 km Detroit Rear Axle (File Direct) DISCLAIMER: Failure to read or distribute this information does not provide exemption from compliance with the information contained herein. WAR406 Copyright C Daimler Truck North America LLC. 58 Revised 9/1/15 All rights reserved. Daimler Trucks North America LLC is a Daimler company. 8-115 Daimler Trucks North America LLC Dealer Warranty Manual NEW VEHICLE LIMITED WARRANTY WARRANTY COVERAGE DESCRIPTIONS & WARRANTY COVERAGE TABLES Coverage` Description Timeb Distanceb Post -Model Year 2011f 2 Years Unlimited Post -Model Year 20119 3 Years 300,000 mi/483 000 km Post -Model Year 2011b 5 Years 750,000 mU1200 Goo km Detroit DT -12 Transttilsaiont (File Direct) 5 Years 750400 mi/ i 200 000 km Coverage may vary; check vehicle's actual warranty coverage online via OWL's Coverage Info/CheckCoverage screen. Time or distance, whichever comes first Applies to vehicles equipped with EPA 2010 compliant diesel engines. Applies to models 2013 and later domiciled In the United States, check actual warranty online via OWL's Coverage Info/Check Coverage screen for coverage listed as'GHG14..." Front Axle coverage is also appilcable to gliders. Medium Duty - General Service: Warranty coverage is determined by Gross Combination Weight Rating, road surface, and vocation. Please see www.ddcsn.com for specific coverage details. Heavy Duty - General Service: Warranty coverage is determined by Gross Combination Weight Rating, road surface, and vocation. Please see www.ddcsn.com for specific coverage details. Heavy Duty - Highway. Warranty coverage is determined by Gross Combination Weight Rating, road surface, and vocation. Please see www.ddcsn.com for specific coverage details. Detroit Transmission: Warranty coverage is determined by Gross Combination Weight Rating, road surface, and vocation. Please see www.ddcsr,,com for specific coverage details. DISCLAIMER: Failure to read or distribute this information does not provide exemption from compliance with the information contained herein. WARS Copyright 0 Daimler Truck North America I.I.C. 59 Revised 9/1/15 All rights reserved. Daimler Trucks North America LLC is a Daimler company. 8-116 Daimler Trucks North America LLC Dealer Warranty Manual NEW VEHICLE LIMITED WARRANTY WARRANTY COVERAGE DESCRIPTIONS & WARRANTY COVERAGE TABLES REIGHTLINER LEVET 11 (I-AcrORy RELEASED ON OR AFTER 01 107f2_0113 Freightliner Level II (Factory, released on or after 01/07/2013) !SRF//:/�T/ /i✓Fn Level 11 Coverage is not available for vehicles in this vocation: Mining Distanceb Category Determinants Modelawith I imitations Road Surface - most severe in -transit between sites Up to 30% off-highway rough, Columbia. Century, or Coronado: lip 100,000 mi/161 000 km maintained concrete/asphalt; maintained to 10%off-highway rough maintained Unlimited graveUcruahed rock; maintained dirt or concrete/asphalt maintained Unlimited soft soll gravellcrushed rock CTCIV 140,000 Ib/63 505 kg or less 6 Months Unlimited Doubles on NY turnpikes are rated 143,000 lb 5 Years Doubles on FL turnpikes are rated 147,000 Ib Axles and Their Manufacturer's GVW Rating 5 Years 2 -axle unit 49,0001b/21 000 kg or less 5 Years 3 -axle unit 69,00016/31 000 kg or less 5 Years 4 -axle unit 89,000 Ib/40 000 kg or less 5 Years 5 -axles or more 98,000 lb/44 452 kg or less 2 Years Coverage" Description rMeb Distanceb Basic Vehide 1 Year 100,000 mi/161 000 km Battery I Year 100,000 mi/161 000 km Brightwork 6 Months Unlimited Cab Corroaion/perforatlon 5 Years Unlimited Cub Structure 3 Years 150,000 mi/241 000 km Corrosion 6 Months Unlimited Crossmembers 5 Years 300,000 mi/483 000 km Diesel Emission 2010` 5 Years 100,000 mi/161 000 km Frame Rails 5 Years 300,000 mi/483 000 km GHG 14d (Medium Heavy Duty to Heavy Heavy Duty Trucks) 5 Years 100,000 mi/ 161 000 km GHG 14d (Medium Heavy Duty to Heavy Heavy Duty Tractors) 5 Years 100,000 mi/ 161 000 km GHGl4d Tire 2 Years 24,000mi/38 400 km Paint 1 Ye az 100,000 mi/161 000 km Paint, Chassis 6 Months Unlimited Front Azle` 2 Years 100,000 mi/161 000 krn Rear Azle 2 Years 100,000 mi/ 161 000 km Transfer Case 2 Years 100,000 mi/161 000 km Transmission 2 Years 100,000 mi/161 000 km Detroit Front Axle` (File Direct) DISCLAIMER: Failure to read or distribute this information does not provide exemption from compliance with the information contained herein. WAR406 Copyright ® Daimler Truck North America LLC. 60 Revised 9/1/15 All rights reserved. Daimler Trucks North America LLC is a Daimler company. 8-117 Daimler Trucks North America LLC Dealer Warranty Manual NEW VEHICLE LIMITED WARRANTY WARRANTY COVERAGE DESCRIPTIONS & WARRANTY COVERAGE TABLES REWdiTUNER LEvELI FACTORY RELEASED oN OR AFTER 01 /07/2013) Coverage` Description Timeb Distanceb Pre -Model Year 20111 2 Years 100,000 mi/161 000 km Post -Model Year 20119 3 Years 300,000 mi/483 000 km Post -Model Year 2011 h 2 Years Unlimited Detroit Rear Azie (File Direct) Pre -Model Year 2011f 2 Years 100,000 mi/161 000 km Post -Model Year 20119 3 Years 300,000 mi/483 000 km Post -Model Year 2011 h 2 Years Unlimited Detroit DT -12 Transmission' (File Direct) 5 Years 750,000 mill 200 000 km Coverage may vary; check vehicle's actual warranty coverage online via OWL's Coverage Info/Check Coverage screen. Time or distance, whichever comes first Applies to vehicles equipped with EPA 2010 compliant diesel engines. Applies to models 2013 and later domiciled in the United States, check actual warranty online via OWL's Coverage Info/Check Coverage screen for coverage listed as'GHG14.,.' Fmnt Axle coverage is also applicable to gliders. Pre -Model Year 2011 Detroit Axle: Warranty coverage is determined by Gross Combination Weight Rating, road surface, and vocation. Please see www.ddcsn.com for specific coverage details. Heavy Duty - General Service: Warranty coverage is determined by Gross Combination Weight Rating, road surface, and vocation. Please see www.ddcsn.com for specific coverage details Medium Duty - General Service: Warranty coverage is determined by Gross Combination Weight Rating, road surface, and vocation. Please see www.ddon.com for specific coverage details. Detroit Transmission: Warranty coverage is determined by Gross Combination Weight Rating, road surface, and vocation. Please see www.ddcsn.com for specific coverage details. DISCLAIMER: Failure to read or distribute this information does not provide exemption from compliance with the information contained herein. WAR406 Copyright o Daimler Truck North America LLC. 61 Revised 9/1/15 All rights reserved. Daimler Trucks North America LLC is a Daimler company. MM Daimler Trucks North America LLC Dealer Warranty Manual NEW VEHICLE LIMITED WARRANTY WARRANTY COVERAGE DESCRIPTIONS & WARRANTY COVERAGE TABLES REIGft itm FACTORY RELEASED PRIOR TO 01 10772WI-X Freightliner Level II (Factory releascdprior to01/07/2013) l��.4Flr!!T/ /A1Fni Level 11 Coverage is not available for vehicles in this vocation: Mining Distance' Category Determinants Models with Limitations Road Surface - most severe in -transit between sites Up to 30% off-highway rough, Columbia, Century, or Coronado: Up 100,000 mi/161 000 km maintained concrete/asphalt: maintained to 10% off-highway rough maintained Unlimited gravel/crushed rock; maintained dirt or concreWasphah; maintained Unlimited soft soil gravel crushed rock GCW 140,000 lb/63 505 kg or less 6 Months Unlimited Doubles on MY turnpikes are rated 143,000 lb 5 Years Doubles on FL turnpikes are rated 147,000 Ib Axles and Their Manufacturer's GVW Rating 100,000 mi/1-61000 kin 2 -aide unit 46,00016!20 865 kg or less 300,000 mi/483 000 km 3-axde unit 66,000 Ib/29 937 kg or Icss 100,000 mi/161 000 kin 4 -axle unit 86,000 Ib/39 008 kg or less 100,000 mi/ 161 000 km 5 -axles or more 98,000 lb/44 452 kg or less 24,000mi/38 400 km Coverage' Description Tnneb Distance' Basic Vehicle 1 Year 100,000 mi/161 000 km Battery 1 Year 100,000 mi/161 000 km Brightwork 6 Months Unlimited Cab Corrosion/Perforation 5 Years Unlimited Cab Structure 3 Years 150,000 mi/241 000 km Corrosion 6 Months Unlimited Crosamembers 5 Years 300,000 ini/483 000 km Diesel Emission 2010` 5 Years 100,000 mi/1-61000 kin Frame Rails 5 Years 300,000 mi/483 000 km GHG14d (Medium Heavy Duty to Heavy Heavy Duty Trucks) 5 Years 100,000 mi/161 000 kin GHG14a (Medium Heavy Duty to Heavy Heavy Duty Tractors) 5 Years 100,000 mi/ 161 000 km GHG14d Tire 2 Years 24,000mi/38 400 km Paint 1 Year 100,000 mi/161 000 km Paint, Chassis 6 Months Unlimited Front Aide' 2 Years 100,000 mi/ 161 000 km Rear Axle 2 Years 100,000 mi/ F6 T 000 km Transfer Case 2 Years 100,000 mi/161 000 km Transmission 2 Years 100,000 mi/ 161 000 km Detroit Front Atlee (File )irect) DISCLAIMER: Failure to read cr distribute this information does not provide exemption from compliance with the information contained herein. WAR406 Copyright C Daimler Truck North America LLC. 62 Revised 9/1/15 All rights reserved. Daimler Trucks North America LLC is a Daimler company. 8-119 Daimler Trucks North America LLC Dealer Warranty Manual NEW VEHICLE LIMITED WARRANTY WARRANTY COVERAGE DESCRIPTIONS & WARRANTY COVERAGE TABLES REtGNTLINER LEVEL 11[FACTORY RFI FAlRi1 oarno Tn A Coverage" Description web Dislancea Pre -Model Year 2011f 2 Yeats 100,000 mi/161 000 km Post -Model Year 20119 3 Years 300,000 mi/483 000 km Post -Model Year 2011h 2 Years Unlimited Detroit Rear Axle (File Direct) Pre -Model Year 201 if 2 Years 100,000 mi/161 000 Ian Post -Model Year 20118 3 Years 300,000 rni/483 000 km Post -Model Year 2011h 2 Years Unlimited Detroit DT -12 TransmL4sionl (File Direct) 5 Years 750,000 mi/1 200 000 km coverage may vary; check vehicle's actual warranty coverage online via OWL's Coverage Info/Check Coverage screen. Time or distance, whichever comes first Applies to vehicles equipped with EPA 2010 compliant dlesel engines. Applies to models 2013 and later domiciled in the United States, check actual warranty online via OWL's Coverage Info/CheckCoverage screen for coverage listed as "GHG14_' Front Axle coverage is also applicable to gliders. Pre -Model Year 2011 Detroit Axle Warranty: Warranty coverage Is detem,ined by Gross Combination Weight Rating, road surface, and vocation. Please see www.ddcsn.com for specific coverage details. Heavy Duty - General Service: Warranty coverage Is determined by Gross Combination Weight Rating, road surface, and vocation. Please see www.ddcsn.com for specific coverage details. Medium Duty -General Service: Warranty coverage is determined by Gross Combination Weight Rating, road surface, and vocation, Please s www.ddcsn.com for specific coverage details ee Detroit Transmission: Warranty coverage is determined by Gross Combination Weight, road surface, and vocation. Please see www.ddcsn.com for specific coverage details. DISCLAIMER: Failure to read or distribute this information does not provide exemption from compliance with the information contained herein. WAR406 Copyright ® Daimler Truck North America LLC. 63 Revised 9/1/15 All rights reserved. Daimler Trucks North America LLC is a Daimler company. 8-120 Daimler Trucks North America LLC Dealer Warranty Manual NEW VEHICLE LIMITED WARRANTY WARRANTY COVERAGE DESCRIPTIONS & WARRANTY COVERAGE TABLES REIGHTLiNER Lrja 1 AcroRY RELEASED ON OR AFTER 011/07rMUT Freightliner Levelill (Factory released on or after 01107/2013) Category Determinants Road Surface - most severe in -transit between sites Any GCW I All Okay Axles and Their Manufacturer's GVW Rating 2 -axle unit Over 49,000 lb/21 000 kg 3 -axle unit Over 69,000 Ib/31 000 kg 4 -axle unit Over 89,000 lb/40 000 kg S -axles or more Over 98,000 Ib/44 452 kg Coverage Description T"tnteb Distanceb Basic Vehicle 1 Yeaz 50,000 mi/80 500 km Battery 1 Year 50,000 mi/80 500 km Brightwork 6 Months Unlimited Cab Corrosion/Perforation 1 Year 50,000 mi/80 500 km Cab Structure 1 Year 50,000 mi/80 500 km Corrosion 6 Months Unlimited Crosamembers 1 Year 50,000 mi/80 500 km Diesd Emission 2010` 5 Years 100,000 mil 161 000 km Frame Rails I Year 50,000 mi/80 500 km GHG14d (Medium Heavy Duty to Heavy Heavy Duty Trucks) 5 Years 100,000 mi/161 000 kna GHG14d (Medium Heavy Duty to Heavy Heavy Duty Tractors) 5 Years 100,000 mi/ 161 000 km GHG14d Tire 2 Years 24,000mi/38 400 km Palet 1 Year 50,000 mi/80 500 km Paint, Chassis 6 Months Unlimited Front Axle` 1 Year 100,000 mU161 000 km Rear Axle I Year I00,000 mi/161000 km Transfer Case 1 Year 100,000 mi/161 000 km Transmission 1 Year 100,000 mi/161 000 km Detroit Front Axle' (File Direct) Pre -Model Year 20l I I Year 100,000 mi/161 000 km Post-Modd Year 2011 B I Year Unlimited Post -Model Year 2011 h 3 Yews 300,000 mi/483 000 km Post -Model Year 20111 2 Years Unlimited Detroit Rear Axle (File Direct) DISCLAIMER: Failure to read or distribute this information does not provide exemption from compliance with the information contained herein. WAR406 Copyright 0 Daimler Truck North America LLC. 64 Revised 9/1/15 All rights reserved. Daimler Trucks North America LLC is a Daimler company, 8-121 Daimler Trucks North America LLC Dealer Warranty Manual NEW VEHICLE LIMITED WARRANTY WARRANTY COVERAGE DESCRIPTIONS & WARRANTY COVERAGE TABLES REWMTUNER GiWL 111(FACTORY RELEAs® ON OR AFTER 07 0 0 3 Coverage' Description T1 xneb Distanceb Pre -Mold Year 2011 f 1 7e. 100,000 mi/ 161 000 km Post -Model Year 20116 1 Year Unlimited Post -Model Year 2011h 3 Years 300,000 mi/483 000 km Post -Model Year 2011 i L7 2 Years Unlimited Coverage may vary; check vehicle's actual warranty coverage online via OWL's Coverage 1nfdCheck Coverage screen. Time or distance, whichever comes first Applies to vehicles equipped with EPA 2010 compliant diesel engines. Applies to models 2013 and later domiciled in the United States, check actual warranty ontine via OWL's Coverage Into/Check Coverage screen for coverage listed as "GHG14_' Front Axle coverage is also applicable to gliders. Pre -Model Year 2011 Detroit Axle: Warranty coverage is determined by Gross Combination Weight Rating, road surface, and vocation. Please see www.ddcsn.com for specific coverage details. Other - Severe Duty; Warranty coverage is determined by Gross Combination Weight Rating, road surface, and vocation. Please see www.ddcsn.com for specific coverage details. Heavy Duty - General Service: Warranty coverage is determined by Gross Combination Weight Rating, road surface, and vocation. Please see www.ddcsn.com for specific coverage details. Medium Duty -General Service: Warranty coverage is determined by Gross Combination Weight Rating, road surface, and vocation. Please see www.ddcsn.com for specific coverage details. DISCLAIMER: Failure to read or distribute this information does not provide exemption from compliance with the information contained herein. WAR406 Copyright a Daimler Truck North America LLC. 65 Revised 9/1/15 All rights reserved. Daimler Trucks North America LLC is a Daimler company. 8-122 Daimler Trucks North America LLC Dealer Warranty Manual NEW VEHICLE LIMITED WARRANTY WARRANTY COVERAGE DESCRIPTIONS & WARRANTY COVERAGE TABLES FREIGMTLINER LEVEL(FACTORY RELEASM PRIOR To 01 20 Freightliner Level III (Factory released prior to 01/07/2013) Category Determinants Road Surface - most severe in -transit between sites Any GCW All Okay Axles and Their Manufacturer's GVW Rating 2 -axle unit Over 46,00016/20 865 kg 3 -axle unit Over 66,000 lb/29 937 kg 4 -axle unit Over 86,000 Ib/39 008 kg 5 -axles or more Over 98,000 lb/44 452 kg Coverages Description Timeb Distanceb Basic Vehicle 1 Year 50,000 mi/80 500 km Battery 1 Year 50,000 mi/80 500 km Brightwork 6 Months Unlimited Cab Corrosion/Perforation 1 Year 50,000 mi/80 500 km Cab Structure I Year 50,000 mi/80 500 km Corrosion 6 Months Unlimited Crossmembers l Year 50,000 mi/80 500 km Diesel Emission 2010` 5 Years 100,000 mi/161 000 km Frame Rails 1 Year 50,000 mi/80 500 km GHG14d (Medium Heavy Duty to Heavy Heavy Duty Trucks) 5 Years 100,000 mi/161 000 km GHG14d (Medium Heavy Duty to Heavy Heavy Duty Tlractors) 5 Years 100,000 mi/ 161 000 km GHG14d Tire 2 Years 24,000mi/38 400 km Paint 1 Year 50,000 mi/80 500 km Paint, Chassis 6 Months Unlimited Front Azle 1 Year 100,000 mu 161 000 km Rear Azle 1 Year 100,000 mi/161 000 km Transfer Case 1 Year 100,000 mi/161 000 km Transmission 1 Year 100,000 mi/161 000 km Detroit Front Axle' (File Direct) Pre -Model Year 2011f 1 Year 100,000 mV161 000 km Post -Model Year 20119 1 Year Unlimited Post -Model Year 201111 3 Years 300,000 mi/483 000 km Post -Model Year 20111 2 Years Unlimited Detroit Rear Axle (File Direct) DISCLAIMER. Failure to read or distribute this information does not provide exemption from compliance with the information contained herein. WAR406 Copyright C Daimler Truck North America LLC. 66 Revised 9/1/15 All rights reserved. Daimler Trucks North America LLC is a Daimler company. 8-123 Daimler Trucks North America LLC Dealer Warranty Manual NEW VEHICLE LIMITED WARRANTY WARIUNTY COVERAGE DESCRIPTIONS dr WARRANTY COVERAGE TABLES REKmTL1NER LEWL(FACTORY RELEASED PRIOR TOO 013 Coverage' Description TStneb Distanceb Pre -Model Year 2011 f 1 Year 100,000 mi/161 000 km Post -Model Year 20116 1 Year Unlimited Post -Model Year 2011h 3 Years 300,000 mi/483 000 km Post -Model Year 2011' 2 Years Unlimited Coverage may vary; check vehiclW s actual warranty coverage online via OWL's Coverage Info/Check Coverage screen. Time or distance, whichever comes first Applies to vehicles equipped with EPA 2010 compliant diesel engines. Applies to models 2013 and later domiciled in the United States, check actual warranty online via OWL's Coverage Info/Check Coverage screen for coverage listed as'GHG14_' Front Axle coverage Is also applicable to gliders. Pre -Model Year 2011 Detroit Axle: Warranty coverage is determined by Gross Combinatlon Weight Rating, road surface, and vocation. Please see www.ddcsn.com for specific coverage details. Other - Severe Duty: Warranty coverage is determined by Gross Combination Weight Rating, road surface, and vocation. Please see www.ddcsn.com for specific coverage details. Heavy Duty - General Service: Warranty coverage Is determined by Gross Combination Weight Rating, road surface, and vocation. Please see www.ddr-sn.com for specific coverage details. Medium Duty - General Service: Warranty coverage is determined by Gross Combination Weight Rating, road surface, and vocation. Please see www.ddcsn.com for specific coverage details. DISCLAIMER: Failure to read or distribute this information does not provide exemption from compliance with the information contained herein. WAR406 Copyright ® Daimler Truck North America LLC. 67 Revised 9/1/15 All rights reserved. Daimler Trucks North America LLC is a Daimler company. 8-124 DAIMLER TRUCKS NORTH AMERICA LLC DEALER WARRANTY MANUAL SECTION 1 NEW VEHICLE LIMITED WARRANTY WARRANTY STATEMENT 8-125 Daimler Trucks North America LLC Section 1 1.1 New Vehicle Coverage Dealer Warranty Manual NEW VEHICLE LIMITED WARRANTY WARRANTY STATEMENT NEw VEHICLE COVERAGE The following section outlines Company standard warranty coverages for all Company vehicles, equipment, chassis, or cabs sold by Daimler Trucks North America and domi- ciled in the USA (50 states and Washington, D.C.) and Canada. This information is also included in the Owner's Warranty Information Booklet. See WarratltX Coverage 1)v-5rrip inns for standard warranty coverages by make and model. Additional coverage may apply, verify coverages online for specific vehicle warranty. 1.2 New Vehicle Limited Warranty Under this New Vehicle Limited Warranty ("Warranty"), Daimler Trucks North America LLC ("Company") warrants that each new vehicle will be free from defects in material and workmanship that occur under normal use within the applicable warranty period, subject to certain limitations and exclusions as specified in this document. 1.3 Limitations This limited warranty applies only to new vehicles sold by an authorized Daimler Trucks North America (DTNA) dealer or ordered directly from DTNA; vehicles sold at auction or as a result of repossession retain the warranty coverage from the original in-service date or factory invoice date if the vehicle has not been warranty registered. Daimler Trucks North America LLC reserves the right to reduce or remove coverage on vehicles in salvage condition. This Warranty covers all components and parts unless specifically covered by other warranties or otherwise excluded by this document. This warranty does not apply to vehicles that are sold or domiciled outside of the United States (50 states and Washington, D.C.) or Canada. This Warranty does not apply to engines, Allison transmissions, tires, or other compo- nents or parts that are not manufactured by Company and that are warranted directly by their respective manufacturers. Progressive damage caused by these manufacturers' components to any other parts including, but not limited to, parts installed by Company is excluded from Company warranty coverage. With respect to the fore- going, Company makes no warranty whether express, implied, statutory or otherwise including, but not limited to, parts installed by Company is excluded from Company warranty coverage. With respect to the foregoing, Company makes no warranty whether express, implied, statutory or otherwise including, but not limited to, any warranty of merchantability or fitness for a particular purpose. THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES OF ANY KIND WHETHER WRITTEN, ORAL, OR IMPLIED INCLUDING, BUT NOT LIMITED TO ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS WARRANTY SPECIFICALLY EXCLUDES ANY DISCLAIMER: Failure to read or distribute this information does not provide exemption from compliance with the information contained herein. WAR406 Copyright 9 Daimler Truck North America LLC. 14 Revised 911/15 All rights reserved. Daimler Trucks North America LLC is a Daimler company. 8-126 Daimler Trucks North America LLC Dealer Warranty Manual NEW VEHICLE LIMITED WARRANTY WARRANTY STATEMENT PURCRASIR'S EXCLusrvc Rrmwnv OTHER WARRANTIES OR CONDITIONS PROVIDED FOR BY LAW, WHETHER STATUTORY OR OTHERWISE_ COMPANY'S SOLE OBLIGATION UNDER THIS WARRANTY SHALL BE TO REPAIR OR REPLACE, IN COMPANY'S SOLE DISCRETION, ANY DEFECTIVE COMPONENT OR PART. SUCH REPAIR OR REPLACEMENT SHALL BE WITHOUT COST TO PURCHASER WHEN PERFORMED WITHIN THE APPLI- CABLE WARRANTY PERIOD (TIME, DISTANCE, OR HOUR LIMIT, WHICH- EVER OCCURS FIRST). Purchaser must notify Company within the applicable warranty period, of any failure of the vehicle to comply with this Warranty and Purchaser must, at Purchaser's expense, promptly return the vehicle to an Authorized Service Facility for inspection and repair or replacement of any defect in material or workmanship occurring within the applicable warranty period. During New Vehicle coverage, warranty reimburse- ment will not be paid on repairs performed by customers on their own vehicles without a current Customer Performed Warranty Agreement (CPWA). The vehicle must be maintained and serviced according to the prescribed schedules outlined in the Driver's/Operator's and Maintenance Manuals. Receipted bills and other evidence showing that required maintenance and service have been performed. are required by Company as a condition of this Warranty. After the Company's obligations under this Warranty expire, all liabilities of Company to Purchaser under this Warranty shall terminate. Repairs made under this Warranty do not constitute an extension of the original Warranty period for the vehicle or for any specific component or part. To the extent that any provision of this Warranty contravenes the law of any jurisdic- tion, such provision shall be inapplicable in such) urisdiction, and the remainder of the warranty shall not be affected. 1.4 Purchaser's Exclusive Remedy THIS WARRANTY SHALL BE THE PURCHASER'S SOLE AND EXCLUSIVE REMEDY AGAINST COMPANY, WHETHER IN CONTRACT, UNDER STATUTE (INCLUDING STATUTORY PROVISIONS AS TO CONDITIONS AS TO QUALITY OR FITNESS FOR ANY PARTICULAIR PURPOSE OF GOODS SUPPLIED PURSUANT TO THE CONTRACT OF SALE), WARRANTY, TORT, STRICT LIABILITY, OR ANY OTHER LEGAL THEORY. 1.5 Limitation of Liability COMPANY'S LIABILITY UNDER THIS WARRANTYIS LIMITED TO THE COST TO REPAIR OR REPLACE, IN COMPANY'S SOLE DISCRETION, THE DEFEC- TIVE COMPONENT OR PART THAT IN NO EVENT SHALL EXCEED THE FAIR MARKET VALUE OF THE VEHICLE AT THE TIME THE DEFECT IS DISCOV- ERED. IN NO EVENT SHALL COMPANY BE LIABLE FOR SPECIAL, INDIRECT, INCI- DENTAL, OR CONSEQUENTIAL DAMAGES INCLUDING, BUT NOT LIMITED DISCLAIMER Failure to read or distribute this information does not provide exemption from compliance with the information contained herein. WAR406 Copyright ® Daimler Truck North America LLC. is Revised 9/1/15 All rights reserved. Daimler Trucks North America LLC is a Daimler company. 8-127 Daimler Trucks North America LLC 1.6 Exclusions Dealer Warranty Manual NEW VEHICLE LIMITED WARRANTY WARRANTY STATEMENT TO, INJURIES TO PERSONS OR DAMAGE TO PROPERTY, LOSS OF PROFITS OR ANTICIPATED PROFITS, OR LOSS OF VEHICLE USE. The following components, parts, or conditions are specifically excluded from coverage under this Warranty. NOTE: Parts found defective prior to installation must be filed as a Parts Adjustment Request (PAR) to the Parts Distribution Center (PDC). AERODYNAMIC WHEEL COVERS AIR SPRINGS Aerodynamic wheel covers are excluded from coverage under this Warranty. Tolerance buildup can occur during the assembly process of the rear suspension and rear cab air springs, and can cause the springs to have the appearance of being crooked, misaligned or improperly installed. This tolerance buildup is not detrimental to the operation of the vehicle and will not have an affect on either the quality of the ride or the durability of the components or vehicle. Straightening of these springs is not covered under this Warranty. ALIGNMENT OF AXLES/WHEELS/STEERING WHEEL Each DTNA vehicle manufacturing plant uses an integrated alignment system to align axles and wheels and to center the steering wheel to Daimler Trucks North America LLC specifications. Realignment or readjustment of these items, including steering stops and steering poppets, is not covered under warranty. Any special alignment settings at the request of the Owner must be handled between the Dealer and Owner after delivery from factory. These special adjustments are not covered under Warranty. AXLE BREATHER VENTS During the vehicle manufacturing process, an oil run or drip stain may appear at the breather vent. Removing the vent, applying pipe sealant to the threaded vent fitting and re -installing the vent is unnecessary. Removing the axle breather vent and re -sealing the threaded fitting is not covered under this Warranty. CAB INTERIOR COMPONENTS The repair or replacement of cab interior components that are rendered unserviceable due to normal wear or abuse are not covered under this Warranty. These components include, but are not limited to: • Curtains • Floor coverings (including floor mats) • Painted trim components • Steering wheel • Steering wheel wrap DISCLAIMER: Failure to read or distribute this information does not provide exemption from compliance with the information contained herein. WAR406 Copyright ® Daimler Truck North America LLC. 16 Revised 9/1 /15 All rights reserved. Daimler Trucks North America LLC Is a Daimler company. Daimler Trucks North America LLC Upholstery Window shades Dealer Warranty Manual NEW VEHICLE UMITED WARRANTY WARRANTY STATEMENT EXCLUSIONS CHROME SURFACES, ALUMINUM AND STAINLESS STEEL COMPONENTS The following items ARE covered under this Warranty: Chrome peeling off in sheets' Chrome cut at mounting bolts due to over -torque at the factory Bubbles in the chrome that are not caused by rock chips and/or general rust conditions • Isolated rust along seams or welds The following items are NOT covered under this Warranty: • General rust, for example, rust on the unfinished backside of a bumper • Dimpling at the mounting bolts • Staining, bluing, and/or yellowing that can be cleaned with a quality cleaning -product • Rust, pits, and/or nicks caused by road wash or road debris breaking the chrome surface • Streaks/stains/corrosion caused by severe wash solutions or corrosive road salts/chemicals Claims pertaining to failures of chrome surfaces, aluminum, and stainless steel compo- nents will not be processed unless a clear digital picture is provided that adequately shows the defect. CLUTCH ADJUSTMENT COMPETITION Clutch adjustments are normally required due to clutch wear and are considered normal maintenance. However, if the clutch adjustment is found to be outside of Company specifications during, or prior to, in-service of the vehicle, a warranty claim will be accepted on a one-time basis. Claims for clutch adjustments will not be accepted unless the adjustment is found to be outside of Company specifications using the special clutch adjustment measuring tools provided by Company (e.g., adjusting the clutch to satisfy feel will not be accepted as warranty). Warranty will become void on any vehicle that is used in competition, including but not limited to: Racing Tractor pulls Other motor sports CONSUMABLE PARTS Parts that are subject to consumption during their normal service life and are routinely replaced during normal maintenance services are covered up to 15,000 miles (24 DISCLAIMER Failure to read or distribute this Information does not provide exemption from compliance with the information contained herein. WAR406 Copyright G Daimler Truck North America LLC. 17 Revised 9/1/15 All rights reserved. Daimler Trucks North America LLC is a Daimler company, 8-129 Daimler Trucks North America LLC Dealer Warranty Manual NEW VEHICLE LIMITED WARRANTY WARRANTY STATEMENT ExCLt1SIM CORROSION OOOkm) for all Daimler Trucks North America LLC vehicles except Thomas Built Bus (TBB) bodies and chassis. TBB consumable parts are covered up to 30 days from the date of in-service. These items are: • Antennas • Ashtrays • Belts • Brake linings • Cigarette lighter assembly • Clutch brake • Clutch linings • Data logger batteries • Desiccant cartridges • Fire extinguishers • Fluorescent ballast and tubes • Fuses • Gladhand • Hosetennas • Light bulbs* • Mattresses • Mud flaps • Mud flap mounting brackets • Caps (including, but not limited to, DEF, fuel, radiator, surge tank) • Receiver -dryer filter • Trailer air hoses • Trailer electrical cables • Windshield washer nozzles • Wiper arms and blades (TBB makes - wiper blades only) Sealed light and LED assemblies are not considered consumable. Consumable parts NOT covered under this Warranty include, but are not limited to, the following: • Antifreeze • Filters (fuel, air, oil, water) • Fluids (unless low due to a warrantable failure) • Lubricants A detailed list of exclusions for CO &QSS QAT is listed under Warranty Coverage Descriptions. DISCLAIMER Failure to read or distribute this information does not provide exemption from compliance with the Information contained herein. WAR406 Copyright ® Daimler Truck North America LLC. tg Revised 9!1!15 All rights reserved. Daimler Trucks North America LLC is a Daimler company. 8-130 Daimler Trucks North America LLC DAMAGE ENGINE Dealer Warranty Manual NEW VEHICLE LIMITED WARRANTY WARRANTY STATEMENT Farr I lcvurc The following are not covered under this Warranty: • Damage caused by use of the vehicle in any application that is not approved or is inconsistent with build specifications • Damage resulting from improper use or misuse or abuse, negligence, improper operation, improper or insufficient maintenance (including, but not limited to failure to maintain vehicle as outlined in the driver's/operator's and maintenance manuals), overloading, unauthorized modifications, accidents, or operation at excessive speeds • Environmental damage, including airborne fallout (including chemicals, tree sap, etc.), or other atmospheric conditions, hailstones, or other acts of nature • Damage caused by road salts/chemicals or cleaning solvents, detergents or compounds • Storage deterioration including damage caused by improper or insufficient storage or maintenance • Damage caused by road hazards or road conditions • Damage caused during shipping/transport after initial delivery of vehicle • Damages (including peeling or flaking) caused by high-pressure washing or steam -cleaning • Damages occurring after in-service (e.g., from rock chips) • Damages caused by customer -installed sealer in air conditioning systems • Damages caused by engine horsepower/torque upgrades • Damage due to vibration associated with misapplication or improper operation of drivetrain components • Damage due to terrorist activities • Damage due to acts of war The engine, including all of its components as supplied by the engine manufacturer, is not covered under this Warranty, but is warranted separately by the manufacturer of the engine. For engine warranty or service, contact the engine manufacturer's autho- rized sales and service facility. ENGINE BRAKES, AIR COMPRESSORS, AND OTHER PROPRIETARY ENGINE COMPONENTS The engine manufacturer installs most air compressors and engine brakes. Any failure of a proprietary engine component or Jacob* Brake component must be filed directly to the engine manufacturer. Failures on non-proprietary engine components can be filed through DTNA. EXHAUST SYSTEM CLAMPS During the early life of the vehicle or when the engine is cold, many exhaust clamps exhibit a soot trace. This condition is self-correcting and does not require adjustment, DISCLAIMER: Failure to read or distribute this information does not provide exemption from compliance with the information contained herein. WAR406 Copyright ® Daimler Truck North America LLC. 19 Revised 9/11/15 All rights reserved. Daimler Trucks North America LLC is a Daimler company. 8-131 Daimler Trucks North America LLC Deafer Warranty Manual NEW VEHICLE LIMITED WARRANTY WARRANTY STATEMENT Exausms tightening, or replacement of the clamp. Claims for adjusting or tightening will not be paid under warranty. FIFTH WHEELS Adjustment of the locking mechanism, bushings, slide locking plungers, and the repair or replacement of lock guards are considered routine maintenance and are not covered under this Warranty. GLASS, MIRRORS, LENS Glass, mirror or lens breakage or chips or scratches of glass, mirrors, or lenses are not covered by this Warranty. MISAPPLICATION OF VEHICLE The warranty on any vehicle used inconsistent with its specified vocation/application will be downgraded to the warranty that is consistent with the vehicle use. Any and all claims associated with the misapplication of the vehicle will be subject to chargeback. MISCELLANEOUS EXPENSES Premium charges and work not directly related to the repair or replacement of a warranted part are not covered under this Warranty. Examples include, but are not limited to: • Federal, state, provincial, and local taxes • Travel expenses • Loss of revenue • Customer labor, including overtime labor • Downtime • Driver's expenses • Cost of rental equipment • Loss of cargo, including perishable cargo • General housekeeping supplies (i.e., shop rags, solvents, sweeping compounds, coveralls, etc.) • Communication charges • Towing/road call assistance (unless coverage is specifically stated in the appli- cable warranty coverage table) • Repair or replacement of optional items not sold or installed by company • Removal or replacement of dealer, body builder, or customer installed equip- ment • Environmental fees, cleanup, or other charges • Cost of emergency services MODIFICATIONS TO ORIGINAL EQUIPMENT Company does not warrant vehicle component or chassis modifications, or equipment installations arranged by Dealers or Customers. In addition, the extra time necessary to remove body builder installed items and/or equipment to work on a warranted repair DISCLAIMER: Failure to read or distribute this information does not provide exemption from compliance with the information contained herein. WAR406 Copyright a Daimler Truck North America LLC. zo Revised 9/1/15 All rights reserved. Daimler Trucks North America LLC is a Daimler company. 8-132 Daimler Trucks North America LLC PAINT Gloss Dealer Warranty Manua! NEW VEHICLE LIMITED WARRANTY WARRANTY STATEMENT Firm imin uc is not covered under this Warranty unless Company sells the complete chassis/body/equipment as a package. If Dealers or Customers perform any vehicle modifications or equipment installations, to the extent these modifications or equipment installations adversely affect other vehicle components or vehicle performance, Company shall not accept any product liability or claims under the terms of the vehicle warranty. These claims become the sole responsibility of the person performing the modifications or equipment installations. The following exclusions to paint warranty include, but are not limited to: • Complete chassis re -painting to repair paint damages • Damages occurring after in-service (e.g., from rock chips) • Peeling/flaking caused by high-pressure washing or steam cleaning • Rusting of painted bumpers • Removal and/or replacement of decals, striping, and/or lettering not applied by Company Specific areas of the vehicle are deliberately not painted or are not painted to any stan- dard, paint repairs are not warrantable to such areas. These areas include: • Underside of the hood, including the inside of the wheel wells • Underside of the roof -mounted air fairings • Underside of the exterior sun visor • Inside of the side -mounted air fairings • Inside of the bumper • Aftertreatment devices Gloss Warranty claims pertaining to gloss issues on vehicles painted with low -gloss colors (as identified in the Data Books) will not be covered under this warranty. SHIP LOOSE ITEMS AND COMPONENTS During the manufacturing process, certain vehicle components are normally placed in the cab of the vehicle or strapped down to the chassis for security reasons. It is the Dealer's responsibility to mount these "ship loose" items in the correct location on the vehicle. Mounting of "ship loose" items will not be covered under warranty. These items include, but may not be limited to, the following: • Aerodynamic wheel covers • Antennas • Fire extinguishers • Trailer air hoses • Trailer electrical cables • Winter fronts • Tire inflation hoses DISCLAIMER: Failure to read or distribute this information does not provide exemption from compliance with the information contained herein. WAR406 Copyright ® Daimler Truck North America LLC. 21 Revised 9/1/15 All rights reserved. Daimler Trucks North America LLC is a Daimler company. 8-133 Daimler Trucks North America LLC • Spare wheels/tires • Chrome lug nut covers • Driver's pouch • Jacks Dealer Warranty Manual NEW VEHICLE LIMITED WARRANTY WARRANTY STATEMENT EXCLUSWM Daimler Trucks North America has established a Roof Fairing Removal program in order to reduce transport related damage. The Transporter will remove the fairing during the decking process and secure the fairing on the frame rail of the unit Benefits for this program include fewer units towed in reverse and an overall improved delivery process. Some units will continue to be received with the fairing collapsed. It is the Dealer's responsibility to mount these fairings correctly. Claims for mounting of these collapsed fairings will not be covered under warranty. Those units received with the fairing removed, DTNA warranty will reimburse for the re -installation of the roof fairing prior to delivery to the end customer. If vehicle is drop shipped directly to customer: Transporter notifies customer that roof fairing has been removed for transport and arranges for re -installation prior to or at delivery. • If customer has facilities for re -installation of roof fairings, then fairings will be re -installed at final delivery location. • If customer does not have facilities to re -install fairings, transporter will arrange with nearest authorized DTNA dealership to have fairings re -installed and shuttle units to customer location at no additional cost to our customer. TRANSMISSIONS Allison transmissions and components are not covered under this Warranty, but are warranted separately by Allison. Information regarding Allison's warranty is provided for informational purposes only and is subject to change. For warranty or service infor- mation, contact Allison's authorized sales and service facility. ROUTINE MAINTENANCE Routine maintenance, servicing, and adjustment, as defined in the applicable Vehicle Maintenance Manual and Driver's Manual, are excluded from Warranty. Periodic adjustment or re -torque of wheel bearings, wheel lug nuts, and suspension U -bolts are considered maintenance adjustments and are not covered under warranty. Vibrations, squeaks, rattles, loose fittings/clamps, hose fitting leaks, loose nuts/bolts/screws, and loose electrical connections may develop during the initial trip(s) of the vehicle and these types of repairs/adjustments are covered under warranty one time during the following applicable initial operating periods unless excluded in the paragraphs below. Reminder. After the following initial operating periods, these developments are the result of use and their repair/adjustment activities are considered routine maintenance and thus excluded from warranty. DISCLAIMER. Failure to read or distribute this information does not provide exemption from compliance with the information contained herein WAR406 Copyright ® Daimler Truck North America LLC. 22 Revised 9/1/15 All rights reserved. Daimler Trucks North America LLC is a Daimler company. 8-134 Daimler Trucks North America LLC INITIAL OPERATING PERIOD Dealer Warranty Manual NEW VEHICLE LIMITED WARRANTY WARRANTY STATEMENT EXCLUSIONS The Initial Operating Period (IOP) for Daimler Trucks North America LLC vehicles is as follows: Make Initial Operating Period Freightliner, Sterling, Western Star Up to 15,000 miles/ 24 000 km Freightliner Custom Chassis Corporation (FCCC) Up to 25,000 miles/ 40 000 km Thomas Built Bus (TBB) bodies and TBB chassis' Up to 6 months from the date of in-service a. TBB applications utilizing FCCC chassis retain the FCCC IOP separate from the TBB body. SEE C'ONSUMA_BL.F, PARTS elsewhere in this section. Exclusions from warranty during the Initial Operating Period are: Cab, hood, and fender -mounted mirrors are adjusted at the factory but may be retracted by the transporter to prevent damage during transport. Subsequent adjustments and tightening of mirror mounting hardware are considered part of the routine preparation of the vehicle before Customer delivery. Claims for adjusting the mirrors or tightening of the attaching hardware will not be paid under warranty during or after the initial operating period. Claims for re-routing of electrical wiring, hoses, or lines which meet Daimler Trucks North America's routing standards will not be paid under warranty during or after the initial operating period. Final preparation of the vehicle for Customer delivery to include cleaning/vacu- uming interior of cab, washing windows, washing the exterior of the vehicle, polishing exterior chromed or painted surfaces are considered as ordering -Dealer responsibilities. Claims for these activities will not be paid under warranty during or after the initial operating period. TEST VEHICLES Any vehicles being used in testing or used to test specific components must be identi- fied to the Warranty Department and accommodations must be made for claims that relate to the test item(s), Any vehicles used in endurance testing, such as the Altoona Test, are void of all warranty, new or used. TIRES AND TIRE BALANCING The tires are not covered under this Warranty, but are warranted separately by the tire manufacturer. Tire balancing is not covered under warranty. DISCLAIMER: Failure to read or distribute this information does not provide exemption from compliance with the information contained herein. WAR406 Copyright a Daimler Truck North America LLC. 23 Revised 9/1/15 All rights reserved. Daimler Trucks North America LLC is a Daimler company. 8-135 Daimler Trucks North America LLC 1.7 Transfer of Warranty Dealer WarrantyManua! NEW VEHICLE LIMITED WARRANTY WARRANTY STATEMENT TRANSFER of WAMtANTY This Warranty is transferable to a subsequent Owner if it has not expired. To ensure the Owner receives proper warranty recognition, the ownership information should be updated in the Company system. 1.8 Change of Owner Address Information To ensure Company's ability to reach the current Owner with Recall and Field Service campaign information, the Owner's information must be updated whenever there is a change to the Owner's name or address. 1.9 Product Improvement Company reserves the right to make improvements or changes to the product at any time without incurring any obligation to make such changes or improvements to any other vehicle. 1.10 Owner's Responsibilities It is the Owner's responsibility to ensure the vehicle is maintained as outlined in the Driver's/Operator's and Maintenance Manuals. It is important that the new Owner becomes familiar with the contents of the warranty information. When the Owner first receives the vehicle, the Dealer should review the Owner's Warranty Information booklet with the Owner. To initiate warranty, the customer must complete and sign the Warranty Start Form (WAR275). Dealer must attach the Warranty Start Form to the Product Registration screen in OWL. DISCLAIMER: Failure to read or distribute this information does not provide exemption from compliance with the information contained herein. WAR406 Copyright ® Daimler Truck North America LLC, 24 Revised 9/1/15 All rights reserved. Daimler Trucks North America LLC is a Daimler company. 8-136 Effective v z D W H Z August, 2009 LIFETIME SERVICE WARRANTY - W United Plastic Fabricating, Inc. (hereinafter called "UPF") warrants each POLY -TANK®, Booster/Foam Tank POLYSIDEO Wetside Tank, Integrator W ' Tank/Body, ELLIPSE 11 Elliptical Tank, EIIip-T-Tank Tank and DEFENDERT"' W Skid Tank to be free from defects in material and workmanship for the service W life of the original vehicle (vehicle must be actively used in an emergency re- ' sponse for fire suppression). All UPF Tanks must be installed and operated in 06 accordance with the UPF Installation and Operating Guidelines. Failure to do 2 so can void the warranty. ZEvery UPF Tank is inspected and tested before leaving our facility. Should Hyour UPF Tank require service, please notify UPF via email, fax, in writing or by calling UPF at 1-978-975-4520. Please provide the serial number, a de- scription of the service request, the location along with the phone number and �. iL name of the contact person. Our goal is to have scheduled work completed within a reasonable time period. J W Under a valid warranty claim, UPF will cover the cost to repair the UPF Tank including the customary and reasonable costs to make the tank accessible rpX_^ W such as the removal and reinstallation of the tank if authorized in advance -111:11 (pre -approved) by UPF. The warranty will not cover tanks that have been im- - a properly installed, operated, misused, abused, or modified from its intended -J or designed use. Serial number must not have been altered, defaced or re - Wmoved. Tanks that are not stored or installed properly which results in the tank suffering UV damage will not be covered by this agreement. F 1 , Should UPF determine that the service claim is valid under this warranty for a . O ' tank located outside of the United States and Canada, UPF will assume the for labor for the described costs and material warranty repair as above plus all travel costs to the U.S. port of embarkation. Costs for airline travel outside (� of the U.S. and Canada will not be the responsibility of UPF. W In the event the tank shall become stationed in an area of the world that is Z considered to be a war zone or where unsafe conditions exist for the safe . Q passage of United States Nationals, as reported by the United States Depart - W ment of State, (http,//www.state.gov), and a request to perform service or warranty repairs, UPF reserves the right to refuse to honor such requests. It Vf is the purchaser's responsibility to relocate the tank to an area where such FPrepairs can be performed without undue risk to UPF employees or their des- ignee. UPF will make every reasonable effort to support our products though _ d alternative means. For Ellipse -f"' elliptical tanks, a separate five year warranty provided by the subcontractor is applied to the sub -frames, chute linings (rubber isolation Z strips) and metal components. The stainless steel wrap provided by UPF Q shall be warranted by the subcontractor performing the wrap installation in J accordance with their warranty in place at the time of the installation. UPF will not be liable for any warranty costs associated with the wrap, sub -frames, 0 chute linings (rubber isolation strips) and metal components but will assist CL with all claims on behalf of its customer. 0� � For PolySideO wetsided tanks and IntegratorT" Tank/Body units, all polypro- components related to the tank shall carry the standard UPF lifetime pylene Continued on back 8-137 service warranty. Other polypropylene components, including but not limited to compartments, wheel wells, fenders and other body related components shall be warranted by UPF for a period of ten years. The warranty for the I PolySide® and Integrator T11 units excludes paint or hardware, which shall be covered by the manufacturer of the paint/hardware. All UPF tanks 50 gallons or less utilized for non -fire applications and installed on specialty vehicles such as ATVs, trailers, boats, etc. are covered under a separate warranty policy available from UPF. Further, UPF ProtectorT"' foam and water trailers are warranted under a separate warranty policy available from UPF. This UPF warranty is transferable within the United States only with prior writ- ten approval by UPF (except an original apparatus manufacturer may assign this warranty to the first titled owner/lessee of the apparatus). UPF will NOT reimburse any unnecessary work and/or work that has not been pre -approved. Any and all third party charges must be pre - authorized and approved in writing by UPF prior to commencing the work. Any unauthorized third party repairs, alterations, actions or modi- fications will not be covered and can void the warranty. UPF will be the sole determining authority as to whether a service claim will be valid and covered under this warranty. LAM J In no event will UPF be liable for an amount in excess of the purchase price LU r:� r: � of the booster/foam tank at the time of manufacture or for any loss or dam - am- age, whether direct, indirect, incidental, consequential, or otherwise arising out of failure of its product. Loss of contents (water, foam, etc.) shall not be Q Qwith the responsibility of UPF. Further, UPF is not responsible for costs associated service repairs to chassis, sub -frames, bodies, valves, dumps, hoses, V ! 4 (3 pressure vacuum vents, and other components (i.e. liquid level transducers, etc.). Further, UPF will not cover the cost for travel of the vehicle to and from a repair facility. F Z PWW This warranty contains the entire warranty. It is the sole warranty and price a . O agreements or representation, whether oral or written, are either merged herein or expressly cancelled. UPF neither assumes, nor authorizes any per - ® WJ LU ' y p_ son supposing to act on its behalf to change, nor assume for it, any warranty or liability concerning its product. This warranty gives you specific legal rights, and you may also have other Z 0 EL ® Y rights which vary from state to state. Some states do not allow exclusion or limitation or incidental or consequential damage, so the above limitation or exclusion may not apply to you. Since some states do not allow limitations on the length of an implied warranty, the above limitation may not apply to you. Z` Q '', owli F- ` J THERE ARE NO WARRANTIES, EXPRESSED OR IMPLIED, WHICH EX- TEND BEYOND THE DESCRIPTION OF THE FACE HEREOF. THERE IS NO EXPRESS OR IMPLIED WARRANTY OF MERCHANTABILITY OR A WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. ADDITION- ALLY, THIS WARRANTY IS IN LIEU OF ALL OTHER OBLIGATION OR LIABILITIES ON THE PART OF UPF. - 0 ,a LL POLY -TANK",& POLYSIDE: are registered trademarks of UPF, Inc. INTEGRATOR"', ELLIPSE"' ELLIP-T-TANK" & DEFENE)ER"' are trademarks of UPF, Inc. r�) 08/01/09 UPF, Inc. Printed in the USA 8-138 PIERCE M A N U F A C T U R[ N G I N C . TO: All Dealer Service Representatives From: Kevin Hanegraaf DATE: January 4, 2010 BULLETIN RE: UPF Tank Warranty Policy — Truck in Accident Service Topic #292 To keep the UPF tank warranty valid on trucks that have been involved in a vehicular accident, it is UPF's policy that the customer must remove the tank from the truck and send it back to one of UPF's facilities for inspection. In the event that this does not take place, the warranty will be considered null and void. The customer must remove and send the tank back to UPF for inspection in order to maintain the original warranty coverage, at which time it will be: - Filled with water - Visually inspected - Ultraviolet spark tested on articulating test stand in the dark - Recommendation for repairs if necessary provided by UPF - Fully evaluated and repaired by UPF If your customer chooses to leave the tank on the truck and wants a technician to inspect and/or repair the tank in the field, then the warrant is -no longer in effect. This direction is upheld by UPF because the technician cannot inspect the entire tank when it is still installed on the truck. Note: This memo is intended to relay the information Pierce has received on UPF's tank warranty for trucks that are in a vehicular accident. In the event of an actual claim, we direct you to consult with UPF's service Manager Maura Watts (800-638-8265 x253) 2 6 0 0 AMERICAN DRIVE - APPLETON W 1 5 4 9 1 2- 2 0 1 7 • 9 2 0- 8 3 2- 3 0 0 0 8-139 EXHIBIT D INSURANCE REQUIREMENTS — VENDORS Provision of Insurance. Without limiting Vendor's indemnification of City, and prior to commencement of work, Vendor shall obtain, provide and maintain at its own expense during the term of this Agreement, policies of insurance of the type and amounts described below and in a form satisfactory to City. Contractor agrees to provide insurance in accordance with requirements set forth here. If Contractor uses existing coverage to comply and that coverage does not meet these requirements, Contractor agrees to amend, supplement or endorse the existing coverage. 2. Acceptable Insurers. All insurance policies shall be issued by an insurance company currently authorized by the Insurance Commissioner to transact business of insurance in the State of California, with an assigned policyholders' Rating of A- (or higher) and Financial Size Category Class VII (or larger) in accordance with the latest edition of Best's Key Rating Guide, unless otherwise approved by the City's Risk Manager. 3. Coverage Requirements. A. Workers' Compensation Insurance. Vendor shall maintain Workers' Compensation Insurance, statutory limits, and Employer's Liability Insurance with limits of at least one million dollars ($1,000,000) each accident for bodily injury by accident and each employee for bodily injury by disease in accordance with the laws of the State of California, Section 3700 of the Labor Code. Vendor shall submit to City, along with the certificate of insurance, a Waiver of Subrogation endorsement in favor of City, its officers, agents, employees and volunteers. B. General Liability Insurance. Vendor shall maintain commercial general liability insurance, and if necessary umbrella liability insurance, with coverage at least as broad as provided by Insurance Services Office form CG 00 01, in an amount not less than one million dollars ($1,000,000) per occurrence, two million dollars ($2,000,000) general aggregate. The policy shall cover liability arising from premises, operations, products -completed operations, personal and advertising injury, and liability assumed under an insured contract (including the tort liability of another assumed in a business contract) with no endorsement or modification limiting the scope of coverage for liability assumed under a contract. C. Automobile Liability Insurance. Vendor shall maintain automobile insurance at least as broad as Insurance Services Office form CA 00 01 covering bodily injury and property damage for all activities of the Vendor arising out of or in connection with Work to be performed under this Agreement, including coverage for any owned, hired, non -owned or rented vehicles, in an amount not less than one million dollars ($1,000,000) combined single limit each accident. 4. Other Insurance Requirements. The policies are to contain, or be endorsed to contain, the following provisions: South Coast Fire Equipment Inc. Page D-1 m A. Waiver of Subrogation. All insurance coverage maintained or procured pursuant to this agreement shall be endorsed to waive subrogation against City, its elected or appointed officers, agents, officials, employees and volunteers or shall specifically allow Vendor or others providing insurance evidence in compliance with these requirements to waive their right of recovery prior to a loss. Vendor hereby waives its own right of recovery against City, and shall require similar written express waivers from each of its subcontractors. B. Additional Insured Status. All liability policies including general liability, excess liability, pollution liability, and automobile liability, but not including professional liability, shall provide or be endorsed to provide that City and its officers, officials, employees, and agents shall be included as insureds under such policies. C. Primary and Non Contributory. All liability coverage shall apply on a primary basis and shall not require contribution from any insurance or self-insurance maintained by City. D. Notice of Cancellation. All policies shall provide City with thirty (30) days notice of cancellation (except for nonpayment for which ten (10) days notice is required) or nonrenewal of coverage for each required coverage. 5. Additional Agreements Between the Parties. The Parties hereby agree to the following: A. Evidence of Insurance. Vendor shall provide certificates of insurance to City as evidence of the insurance coverage required herein, along with a waiver of subrogation endorsement for workers' compensation and other endorsements as specified herein for each coverage. Insurance certificates and endorsement must be approved by City's Risk Manager prior to commencement of performance. Current certification of insurance shall be kept on file with City at all times during the term of this contract. City reserves the right to require complete, certified copies of all required insurance policies, at any time. B. City's Right to Revise Requirements. The City reserves the right at any time during the term of the contract to change the amounts and types of insurance required by giving the Vendor sixty (60) days advance written notice of such change. If such change results in substantial additional cost to the Vendor, the City and Vendor may renegotiate Contractor's compensation. C. Enforcement of Contract Provisions. Vendor acknowledges and agrees that any actual or alleged failure on the part of the City to inform Vendor of non- compliance with any requirement imposes no additional obligations on the City nor does it waive any rights hereunder. D. Requirements not Limiting. Requirements of specific coverage features or limits contained in this Section are not intended as a limitation on coverage, limits or other requirements, or a waiver of any coverage normally provided by any insurance. Specific reference to a given coverage feature is for purposes of clarification only as it pertains to a given issue and is not intended by any Party or insured to be all inclusive, or to the exclusion of other coverage, or a waiver of any type. South Coast Fire Equipment Inc. Page D-2 8.141 E. Self-insured Retentions. Any self-insured retentions must be declared to and approved by City. City reserves the right to require that self-insured retentions be eliminated, lowered, or replaced by a deductible. Self-insurance will not be considered to comply with these requirements unless approved by City. F. City Remedies for Non Compliance If Vendor or any subcontractor fails to provide and maintain insurance as required herein, then City shall have the right but not the obligation, to purchase such insurance, to terminate this agreement, or to suspend Vendor's right to proceed until proper evidence of insurance is provided. Any amounts paid by City shall, at City's sole option, be deducted from amounts payable to Vendor or reimbursed by Vendor upon demand. G. Timely Notice of Claims. Vendor shall give City prompt and timely notice of claims made or suits instituted that arise out of or result from Vendor's performance under this Agreement, and that involve or may involve coverage under any of the required liability policies. H. Vendor's Insurance. Vendor shall also procure and maintain, at its own cost and expense, any additional kinds of insurance, which in its own judgment may be necessary for its proper protection and prosecution of the Work. South Coast Fire Equipment Inc. Page D-3 8-142 EXHIBIT E CITY OF NEWPORT BEACH _Te , • FAITHFUL PERFORMANCE BOND The premium charges on this Bond is $ at the rate of $ , being thousand of the Contract price. WHEREAS, the City of Newport Beach, State of California, has awarded to Pierce Manufacturing, Inc. hereinafter designated as the "Principal," a contract for the manufacturing of Two (2) 2015 Arrow XT Pumpers in strict conformity with the Contract on file with the office of the City Clerk of the City of Newport Beach, which is incorporated herein by this reference. WHEREAS, Principal has executed or is about to execute the Contract and the terms thereof require the furnishing of a Bond for the faithful performance of the Contract. NOW, THEREFORE, we, the Principal, and , duly authorized to transact business under the laws of the State of California as Surety (hereinafter "Surety"), are held and firmly bound unto the City of Newport Beach, in the sum of Five Hundred Thirty Nine Thousand Seven Hundred Sixty One Dollars and 951100 ($539,761.95) lawful money of the United States of America, said sum being equal to 100% of the estimated amount of the Contract, to be paid to the City of Newport Beach, its successors, and assigns; for which payment well and truly to be made, we bind ourselves, our heirs, executors and administrators, successors, or assigns, jointly and severally, firmly by these present. THE CONDITION OF THIS OBLIGATION IS SUCH, that if the Principal, or the Principal's heirs, executors, administrators, successors, or assigns, fail to abide by, and well and truly keep and perform any or all the work, covenants, conditions, and agreements in the Contract Documents and any alteration thereof made as therein provided on its part, to be kept and performed at the time and in the manner therein specified, and in all respects according to its true intent and meaning, or fails to indemnify, defend, and save harmless the City of Newport Beach, its officers, employees and agents, as therein stipulated, then, Surety will faithfully perform the same, in an amount not exceeding the sum specified in this Bond; otherwise this obligation shall become null and void. As a part of the obligation secured hereby, and in addition to the face amount specified in this Performance Bond, there shall be included costs and reasonable expenses and fees, including reasonable attorneys fees, incurred by the City, only in the event the City is required to bring an action in law or equity against Surety to enforce the obligations of this Bond. Surety, for value received, stipulates and agrees that no change, extension of time, alterations or additions to the terms of the Contract or to the work to be performed thereunder South Coast Fire Equipment Inc. Page E-1 8.143 shall in any way affect its obligations on this Bond, and it does hereby waive notice of any such change, extension of time, alterations or additions of the Contract or to the work or to the specifications. This Faithful Performance Bond shall be extended and maintained by the Principal in full force and effect for one (1) year following the date of formal acceptance of the Equipment by the City. In the event that the Principal executed this bond as an individual, it is agreed that the death of any such Principal shall not exonerate the Surety from its obligations under this Bond. IN WITNESS WHEREOF, this instrument has been duly executed by the Principal and Surety above named, on the day of , 2020. Name of Contractor (Principal) Name of Surety Address of Surety Telephone Authorized Signature/Title Authorized Agent Signature Print Name and Title NOTARY ACKNOWLEDGMENTS OF CONTRACTOR AND SURETY MUST BE ATTACHED South Coast Fire Equipment Inc. Page E-2 8-144 State of California County of On Public, personally appeared ACKNOWLEDGMENT SS. before me, Notary who proved to me on the basis of satisfactory evidence to be the person(s) whose name(s) is/are subscribed to the within instrument and acknowledged to me that he/she/they executed the same in his/her/their authorized capacity(ies), and that by his/her/their signatures(s) on the instrument the person(s), or the entity upon behalf of which the person(s) acted, executed the instrument. I certify under PENALTY OF PERJURY under the laws of the State of California that the foregoing paragraph is true and correct. WITNESS my hand and official seal. Signature (seal) ACKNOWLEDGMENT State of California County of }ss. On Public, personally appeared before me, , Notary who proved to me on the basis of satisfactory evidence to be the person(s) whose name(s) is/are subscribed to the within instrument and acknowledged to me that he/she/they executed the same in his/her/their authorized capacity(ies), and that by his/her/their signatures(s) on the instrument the person(s), or the entity upon behalf of which the person(s) acted, executed the instrument. I certify under PENALTY OF PERJURY under the laws of the State of California that the foregoing paragraph is true and correct. WITNESS my hand and official seal. Signature (seal) South Coast Fire Equipment Inc. Page E-3 8-145