HomeMy WebLinkAbout708 ------—--------
A. ALL WORK IS TO BE DONE IN CONFORMANCE WITH 2016 C.B.C.
J!
I�Z EXTERIOR PLASTER SPECIFICATION
9. ALL EXPANDED METAL LATH ("K-LATH") AND LATH NAILING TO�BE OF
CORROSION RESISTANT MATERIAL f. PLASTERING SHALL NOT BE LESS THAN (3) COATS WHEN APPLIED OVER
F
METAL LATH.
C. LATH SHALL BE FASTENED WITH 1-1/2" LONG X I I GA. BARRED NAILS
WITH 7/16" HEADS, NAILED 6- O.C. HORIZONTAL AND VERTICAL.
G. THE FIRST COAT SHALL BE APPLIED W/SUFFICIENT MATERIAL AND
THE LATH. THE SURFACE
PRESSURE TO FILL SOLIDLY ALL OPENINGS IN
D. A WEATHER RESISTANT BARRIER OF (2) LAYERS OF GkAbE "Du BLDG.
SHALL BE SCORED SUFFICIENT ROUGH TO PROVIDE ADEQUATE BONDING
OF THE SECOND COAT.
PAPER IS TO BE INSTALLED OVER STUDS OR PLYWOOD SHEATHING.
H. SECOND COAT SHALL BE BROUGHT OUT TO PROPER THICKNESS RODDED
R. AN APPROVED G.I. SCREED W1 A MIN. VERT. FLANGE OF 3-1/2 IS
TO BE INSTALLED NO LESS THAN 2" BE LOW THE FOUNDATIO PLATE NE AND FLOATED SUFFICIENTLY ROUGH TO BOND THE FINISH COAT. THE
ON ALL PLASTERED WALLS,AND 2"ABOVEADJOINING SLAB WORK. SECOND COAT SHALL HAVE A MAX.VARIATION OF 3/16" IN.ANY DIRECTION
------- UNDER A 5' STRAIGHTEDGE
141
V,�,
J. FINAL COAT SHALL HAVE TEXTURE APPROVED BY OWNER.
ilk Cq
E
)
Cq
E
f"o
V)
wA
E
0
LF
0 d)
7
pq
L WVZ��
�7 ......
,4
r
T
S
Beve[Ch-a-rinel ELEVATION NOTE
'_7
THK. EXTERIOR PLASTER, SEE SPECIFICATIONS ON THIS SHEET.
7/8'
..........
2. FASCIA BOARD, REFER TO DETAIL FOR SIZE AND SHAPE.
3. BARGE BOARD, REFER TO DETAIL FOR SIZE AND SHAPE
'A
r 4. RATED ROOFING, SEE ROOF PLAN FOR SELECTION.
5. OVERHEAD SECTIONAL GARAGE DOOR.
6. EXTERIOR LIGHT FIXTURE. (SELECTION BY OWNER
7. 20 OZ. COPPER FLASHING W/ HEMMED EDGE.
8. 20 OZ. COPPER STUCCO SCREED LOCATED 2" BELOW PLATE OR ABV FIN. SURFACE.
9. ELECTRIC METER,VERIFY EXACT LOCATION.
7:7
10. GAS METER,VERIFY EXACT LOCATION.
7 7
Pattern 773 PO T ON THAT IS 1 1. PROVIDE ADDRESS NUMBERS PLACED IN A $1 1 PLAINLY VISIBLE
FROM THE STREET OR ROAD FRONTING PROPERTY. NUMBERS SHALL CONTRAST
LJ
W/ BACKGROUND,BE ARABIC OR ALPHABETIC LETTERS AND SHALL BE A MIN.
;F
HIGH W/A MINIMUM STROKE OF 1/2" PER SECTION (R319. CRC)
OF 4
C
14r
12 COPPER ATTIC VENT W1 SCREEN & LOUVERS SEE ROOF PLAN FO r R SIZE.
31,r 5116P I -- ----- zm
1 3. ENTRY DOOR WITH INTERLOCKING BRONZE WEATHER STRIPPING.
1V2-
THK.TEMPERED SAFETY GLASS &WD. CAPAT,
14. LOW WALL W/ 1/2 4:42"O.A.
I I iT
f
Paft"Vl Non*W Skze A B C
I,X8 7-1/20 6-11W 5-1/2" 15. LOW WALL W/ EXT. PLASTER FINISH & WD. CAP,AT.+42"MIN OVERALL HT. d,
I x 10 942" 8-1116" 7421
773 "OLD TEXAS BRICK"VENEER ------
1 6�; :CHEVY CHASEW/IVORY BUFF mi
,, _�:� ,
P4
LIGHT SMEAR. SEE DETAIL 8/D.2 FOR VENEER MATERIAL,r BACKING &ANCH
17. r L,
"MER
CLASS "A" ELASTOMERIC DECKING MATERIA K_O" I.C.0/E.S.R. #1661. rr Of
19. CONTINUOUS RAIN GUTTER,MATCH METAL
ROOF MATERIAL& COLOR.r
18. 2" X 3" DOWNSPOUT,MATCH METAL ROOF MATERIALr& COLOR
$EDAR
DATE
X
20 J'THK 10 WD. BEVEL CHANNEL SIDING 'BY KELLEHER CORP.,TREATED & PRIMED
8 #773 20467809 21. SAROYAN #3302 TRIM,TREATED B
ACK-PRIMED.
PRCffCl NO.
18-25
Special Order 20SM-1
70
10 #M 510052)052 9;
22. CUSTOM COPPER CHIMNEY CAP. SEE DETAIL&ROOF PLAN.
A=NO.
23. WOOD FRAMED COLUMN W/ MbF"EXTIRA"CLADDING. USE X 7 EXTIRA BASE,
W/ BEVELED TOP, CL'R TO FIN. PATIO SURFACE.
TEN SIDING.T'MDF "EXTIRA"W/J" X'�T'WD. BATTENS @ 12"0
24. BOARD& BAT
/C