HomeMy WebLinkAbout809 EXTERIOR PLASTER SPECIFICATION
A., ALL WORK IS TO BE DONE IN CONFORMANCE WITH 2016 C.B.C.
B. ALL EXPANDED METAL LATH (-K-LATH-) AND LATH NAILING TO BE OF
CORROSION RESISTANT MATERIAL
C.: LATH SHALL BE FASTENED WITH 1-1/2" LONG X I I GA. BARRED NAILS
WITH 7/16- HEADS, NAILED 6- O.C. HORIZONTAL AND VERTICAL
j
D. A WEATHER RESISTANT BARRIER OF(2) LAYERS OF GRADE -D" BLDG.
PAPER IS TO BE INSTALLED OVER STUDS OR PLYWOOD SHEATHING.
D A
E. AN APPROVED G.I.SCREED W/A MIN. VERT. FLANGE OF 3-1/2- IS
TO BE INSTALLED NO LESS THAN 2" BELOW THE FOUNDATION PLATE LINE
ON ALL PLASTERED WALLS, AND 2"ABOVE ADJOINING SLAB WORK.
METAL LATH.
F. PLASTERING SHALL NOT BE LESS THAN(3) COATS WHEN APPLIED OVER
"t"'qg�,2
G.� THE FIRST COAT SHALL BE APPLIED W/SUFFICIENT MATERIAL AND
PRESSURE TO FILL SOLIDLY ALL OPENINGS IN THE LATH.THE SURFACE
SHALL BE SCORED SUFFICIENT ROUGH TO PROVIDE ADEQUATE BONDING
OF THE SECOND COAT.
NESS RODDED
ND COAT SHALL BE BROUGHT OUT TO PROPER THICK
AND FLOATED SUFFICIENTLY ROUGH TO BOND THE FINISH COAT.THE
UNDER A 5'STRAIGHTEDGE .
s EC 'OND COAT SHALL HAVE A MAX, VARIATION OF 3/16" IN ANY DIRECTION
J
0
FINAL COAT SHALL HAVE TEXTURE TO MATCH EXISTING.
CN
777777
00
46
1-74
7-
P4
0
r4,
t
S
ELEVATION NOTE
THK. EXTERIOR PLASTER, SEE SPECIFICATIONS ON THIS SHEET.
1. 7/8
2. FASCIA BOARD, REFER TO DETAIL FOR SIZE AND SHAPE.
3. BARGE BOARD, REFER TO DETAIL 00
SIZE AND SHAPE.
4. CLASS 'A' RATED ROOFING,SEE ROOF PLAN FOR SELECT
ION.
A
5. OVERHEAD SECTIONAL GARAGE DOOR.
6. EXTERIOR LIGHT FIXTURE. (SELECTION BY OWNER)
7. 20 OZ. COPPER FLASHING W/HEMMED EDGE.8. 20 OZ.COPPER STUCCO SCREED LOCATED 2" BELOW PLATE OR 2" ABV FIN. SURFACE.
9. ELECTRIC METER,VERIFY EXACT LOCATION.
W4
10. GAS METER,VERIFY EXACT LOCATION.PROVIDE ADDRESS NUMBERS PLACED IN 4 POSITION THAT IS PLAINLY VISIBLE
FROM THE STREET OR ROAD FRONTING PROPERTY. NUMBERS SHALL
CONTRAST
W/ BACKGROUND, BE ARABIC OR ALPHABETIC LETTERS AND SHALL BE A MIN. 0)
OF 4" HIGH W/A MINIMUM STROKEOF 1/2" PER SECTION (R319.1 CRQ
12. COPPER ATTIC VENT W1 SCREEN & LOUVERS. SEE ROOF PLAN FOR SIZE.
13. ENTRY DOOR WITH INTERLOCKING BRONZE WEATHER STRIPPING.
14. (N) LOW WALL W/ 1/2'THK.TEMPERED SAFETY
GLASS &Wb. CAP,AT +42"O.A�r
CAPL LL
1 5. (N) LOW WALL W/EXT. PLASTER FINISH &WD. AT +42"MIN. OVERA HT.
16.1(N) 2 T14K."OLD TEXAS BRICK" 'VENEER,CHEVY
HASE W/ IVORY BUFF MORTAR,
LIGHT SMEAR. SEE DETAIL 8/D.2 FOR VENEER MATERIAL, BACKING &ANCHORING.
17
pq
CLASS "A"ELASTOMERIC DECKING MATERIAL, 'MERK-O" I.C.C./E.S.R. #1661
co
1 8. 2" X 3" DOWNSPOUT,MATCH METAL ROOF MATERIAU& COLOR
19. CONTINUOUS RAIN GUTTER, MATCH METAL ROOF MATERIAL&COLOR.
7777
10
20. THK.rX WD. BEVEL CHANNEL SIDING BY KELLEHER CORP,rTR
EATED & PRIMED
21. SAROYAN #3302 TRIM, TREATED St BACK-PRIMED.
22. CUSTOM COPPER CHIMNEY CAP. SEE DETAIL ROOF PLAN. Nu
MED COLUMN W/T' MDF"EXTIRA" CLADDING. USE X 7�' EXTIRA BASE
23. WOOD FRA
DA
W/BEVELED TOP, CL'R TO FIN. PATIO SURFACE. 01 r 2019
2
24. BOARD BATTEN SIDING: MDF "EXbRA".W1 X 2 WD. BATTENS @ 1
2"O/C r-,. PROJECT NO.
1 -25
8
NO.
SHEET