HomeMy WebLinkAbout20180525_PLNG Corrections
City of Newport Beach
Community Development Department
100 Civic Center Drive / P.O. Box 1768
Newport Beach, CA 92658
Phone: (949) 644-3200
www.newportbeachca.gov
PLANNING DIVISION
PLAN CHECK
CORRECTIONS
F:\Users\CDD\Shared\Admin\Planning_Division\Current_Templates Revised 04-02-13 – CDD
F:\Users\PLN\Shared\PA's\PAs - 2017\PA2017-228\PLNG PA2017-228 Corrections.docx
Plan Checker: Benjamin Zdeba
Phone No: 949-644-3253 Fax No: 949-644-3229
Email Address: bzdeba@newportbeachca.gov
PLAN CHECK NO. PA2017-228 ADDRESS: 4302 Ford Road
CORRECTION DATE: May 25, 2018
CORRECTIONS:
1. Please make the following corrections on Sheet Number A0.00:
a. Verify consistency of the site area listed. “Lot Area” notes 1.049 acres and “Zone”
notes 1.054 acres. In addition, these numbers do not match the area stated on
Sheet Number VTM-1.
b. Under “Setbacks,” please state the actual required side setback rather than the
generic requirements from the Zoning Code.
c. Density is based on actual lot area, not the allowable floor area limit. As such, please
revise “Residential Density” to show the lot area divided by 1,200 square feet.
d. Remove the “Private Balcony/Decks on Podium Level” listed under “Open Space,”
as it is already included in the “Private Open Space” below.
2. On Sheet Numbers C-1, C-2 and C-3, the proposed building is labeled as “apartments,”
which is confusing since the project will be condominiums. Please consider revising.
3. On Sheet Numbers L0.10, L0.20 and L0.30, please show the property lines.
4. On Sheet Number L0.20, please make it clear the existing public park parking lot will not
be used by residents of the proposed project. Including it as item number 11 on the legend
is confusing and seems to implicate it as part of the project.
5. On Sheet Number A0.01, please verify the areas listed under “Project Data” and revise the
setback requirements consistent with corrections 1(a) and 1(b) above.
6. On Sheet Numbers A3.01, A3.02 and A3.03, it would be helpful to show a line that
indicates the existing grade on the two-dimensional section drawings.