Loading...
HomeMy WebLinkAboutF2022-0153 - CalcsBULL TVT008r= TUBE APPROVALS AND SPECIFICATIONS • ASTM A135, Grade A • ASTM A795, Type E, Grade A • Pressure rated to 300 psi • Underwriters Laboratories— United States of America • Underwriters Laboratories—Canada • Factory Mutual • NFPA-13 • NFPA-13R • NFPA-14 • CIVIL DEFENSE APPROVAL— United Arab Emirates • Made in the United States of America • UL, ULC & FM listed for roll -groove, plain -end and welded joints for wet, dry, preaction and deluge sprinkler systems. • LEED v4 Certified .' SCHEDULE 10 640 FINISHES AND COATINGS SHEET • Schedule 10 & 40 Sprinkler Pipe receives an OD mill coating of water-based paint which has corrosion protection expected with a painted carbon steel product, i.e. it would be expected to resist corrosion for an extended and indefinite period in a clean and dry environment and, as environmental conditions deteriorate, the corrasion protection would also diminish. • Schedule 10 & 40 Sprinkler Pipe (black) receives an ID mill coating of Eddy Guard II MIC preventative coating. E62 has been tested at independent laboratories to resist bacterial growth and maintain minimal bacterial count after multiple flushes (25) of the pipe. • Schedule 10 & 40 Sprinkler Pipe when Hot Dip Galvanized by ASTM A123 and supplied by Bull Moose Tube is UL listed and FM approved. PRODUCT IDENTIFICATION • Every length of Bull Moose fire sprinkler pipe features large, easy -to - read, continuous stenciling, clearly identifying the manufacturer, type of pipe, size, and length. Raminal WKIN Pipe Size(inches)-1- -.-.-1.114" -.._1.1/2, _.21, - .2.1/2, ,31, :V 6' -81, KE X11:. yy�LL��,� FI'�j s_ � �_�®� -.-•II ®� I' 11 pjtey�)} OWN II II II II II II II *Calculated using Standard UL CRR formula, UL Fire Protection Directory, Category VIZV SUBMITTAL Project Contractor Engineer Specification Reference Date System Type Locations Comments UL C UL .r.•�® 0 Schedule 10 - Black 0 Schedule 10- Hot Dip Galvanized 0 Schedule 40 - Black 0 Schedule 40 - Hot Dip Galvanized Fig. 200 - "Trimline" Adjustable Band Hanger (B -Line Fig. B317ONF) Fig. 20OF - "Trimline" Adjustable Band Hanger with Felt Lining (B -Line Fig. B317ONFF) Fig. 200C - "Trimline" Adjustable Band Hanger with Plastic Coated (B -Line Fig. B317ONFC) Fig. 2005 - "Trimline" Adjustable Band Hanger with Non -Captured Nut Size Range: Fig. 200 - 1/2" (15mm) thru 8" (200mm) pipe Material: Steel, Pre -Galvanized to G90 specifications Function: For fire sprinkler and other general piping purposes. Knurled swivel nut design permits hanger adjustment after installation. Features: • 0/2" o 5mm) thru T' (5omm)) Flared edges ease installation for all pipe types and protect CPVC plastic pipe from abrasion. Captured design keeps adjusting nut from separating with hanger. Hanger is easily installed around pipe. For hanger with non -captured nut order Fig. 200S. • (21/2" (65mm) thru 8" (200mm)) Spring tension on nut holds it securely in hanger before installation. Adjusting nut is easily removed. Approvals: Underwriters Laboratories listed (1/2" (15mm) thru 8" (200mm)) in the USA (UL) and Canada (cUL) for steel and CPVC plastic pipe and Factory Mutual Engineering Approved (FM) (3/4" (20mm) thru 8" (200mm)). Conforms to Federal Specifications WW -H-171 E & A -A -1192A, Type 10 and Manufacturers Standardization Society ANSI/MSS SP -69 & SP -58, Type 10. Maximum Temperature: 650°F (343T) Finish: Pre -Galvanized. Stainless Steel _ materials will be supplied with (2) hex nuts in place of a knurl nut. Order By: Figure number and pipe size Designed to meet or exceed requirements of FM DS 2-0. Fig. 200C Fig. 200-1 to 200-2 Fig. 20OF Hangers ®TOLCO- c@ us umn FM X Fig. 200-21/2 to 200-8 Pipe Size 4 A B li Fig. 200-1 to 200-2 Fig. 20OF Hangers ®TOLCO- c@ us umn FM X Fig. 200-21/2 to 200-8 All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. Fire Protection Solutions 21 i Fig. 2005 B -Line by E,T•N Pipe Size Rod Size A B Approx. Wt./100 Part N0. in. (mm) in. Win) in. (ni lbs. (kg) 200-1/2 112^ (15) 3/8"-16 31/8" (79.4) 25/8" (66.7) 11 (5.0) 200.3/4 3/4" (20) 3/8"-16 31/8' (79.4) 21/2" (63.5) 11 (5.0) 200-1 1' (25) .: 3/8"-16 33/8" (85.7). 25/8" (66.7) 12 (5.51 200-11/4 11/4" (32) 3/8"-16 33/4" (94.0) 27/8" (73.0) 13 (5.9) 200-11/2 11/2' (40) 3/8''-16 37/8" 198.4) 27/8" (73.0) 14 (6.4) 200-2 2' (50) 3/8"-16 41/2' (114.3) 3" (76.3) 15 (6.9) 200-21/2 21/2" (65) 3/8"-16. -. 55/6" (142.9) 41/8" 1104.7) 27 (12.3) 200-3 3" (75) 3/8'-16 57/8" (149.1) 4" (101.6) 29 (13.3) 200-31/2. 31/2" (90) 3/8"-16 73/8" (187.3) 5174' (133.3) 34 (15.6) 200-4 4" (100) 3/8"-16 73/8" 1187.3) 5' (127.0) 35 (16.0) 200.5 5" (125) 1/2'-13 91/8" (231.8) 61/4" (156.7) 66 (30.2) 200-6 6" (150) 1/2"-13 101/8" (257.2) 63/4' (171.4) 73 (33.4) 200-8 8" (200) 1/2'-13 131/8" (333.4) 83/4' (222.2) 136 (62.3) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. Fire Protection Solutions 21 i Fig. 2005 B -Line by E,T•N Page 1 of 6 The Viking Corporation, 210 N Industrial Park Drive, Hastings MI 49058 Telephone: 269-945-9501 Technical Services: 877-384-5464 Fax: 269.818-1680 Email: techsvcs@vikingcorp.com DESCRIPTION The Viking Microfast° Quick Response Pendent Sprinkler VK302 is a small thermosensitive glass bulb spray sprinkler available with various finishes and temperature ratings to meet design requirements. The special Polyester, Polytetrafluoroethelyne (PTFE), and Electroless Nickel PTFE (ENT) coatings can be used in decorative applications where colors are desired. In addition, these coatings have been investigated for installation in corrosive atmospheres and are listed/approved as corrosion resistant as indicated in the Approval Charts. (Note: FM Global approves ENT finish as corrosion resistant. FM Global has no approval classification for PTFE and Polyester coatings as corro- sion resistant.) 2. LISTINGS AND APPROVALS c �L us cULus Listed: Category VNIV FM Approved: Class Series 2000 vds VdS Approved: Certificates G414009 and G414010 LPCB Approved R C G c CE Certified: Standard EN 12259-1, EC -certificate of conformity 0832 -CPD -2001 Refer to Approval Chart 1 and Design Criteria cULus Listing requirements, and refer to Approval Chart 2 and Design Criteria for FM Approval requirements that must be followed. 3. TECHNICAL DATA Specifications: Minimum Operating Pressure: 7 psi (0.5 bar) Rated to 175 psi (12 bar) water working pressure Factory tested hydrostatically to 500 psi (34.5 bar) Thread size: 1/2" NPT, 15 mm BSP Nominal K -Factor: 5.6 U.S. (80.6 metric**) Glass -bulb fluid temperature rated to -65 *F (-55 °C) Overall Length: 2-1/4" (58 mm) Viking Technical Data may be found on The Viking Corporation's Web site at hftp:/Iwww.vikinggroupinc.com. The Web site may include a more recent edition of this Technical Data Page. *cULus Listing, FM Approval, and NFPA 13 installs require a minimum of 7 psi (0.5 bar). The minimum operating pressure for LPCB and CE Approvals ONLY is 5 psi (0.35 bar). Material Standards: Frame Casting: Brass UNS-CB4400 or QM Brass Deflector: Phosphor Bronze UNS-C51000 or Copper UNS-C19500 Bulb: Glass, nominal 3 mm diameter Belleville Spring Sealing Assembly: Nickel Alloy, coated on both sides with PTFE Tape Screw: Brass UNS-C36000 Pip Cap and Insert Assembly: Copper UNS-C11000 and Stainless Steel UNS-S30400 For PTFE Coated Sprinklers: Belleville Spring -Exposed, Screw -Nickel Plated, Pip Cap -PTFE Coated For Polyester Coated Sorinklers7 Belleville Spring -Exposed For ENT Coated Sprinklers Belleville Spring -Exposed, Screw and Pipcap - ENT plated. Ordering Information: (Also refer to the current Viking price list.) Order Quick Response Pendent Sprinklers by first adding the appropriate suffix for the sprinkler finish and then the appropriate suffix for the temperature rating to the sprinkler base part number. Finish Suffix: Brass = A, Chrome = F, White Polyester = M -/1N, Black Polyester = M -/B, Black PTFE = N, and ENT = JN Temperature Suffix: 135 °F (68 'C) =A, 155 °F (68 °C) = B, 175 °F (79 "C) = D, 200 °F (93 °C) = E, 286 "F (141 °C) = G For example, sprinkler VK302 with a Brass finish and a 155 °F (68 `C) temperature rating = Part No. 12979AB Available Finishes And Temperature Ratings: Refer to Table 1. Accessories: (Also refer to the "Sprinkler Accessories" section of the Viking data book.) Form No. F033314 Rev 14.1 (New Page) VIKING` Page 3 of 6 MICROFASTO QUICK RESPONSE PENDENT SPRINKLER VK302 (K5.6) The Viking Corporation, 210 N Industrial Park Drive, Hastings MI 49058 Telephone: 269-945-9501 Technical Services: 877-384-5464 Fax: 269.818-1680 Email: techsvcs@vikingcorp.com TABLE 1: AVAILABLE SPRINKLER TEMPERATURE RATINGS AND FINISHES Ordinary 135 °F (57 °C) 100 °F (38 °C) Orange Ordinary 155 °F (68 °C) 100 °F (38 °C) Red Intermediate 175 °F (79 °C) 150 °F (65 °C) Yellow Intermediate 200 7 (93 °C) 150 °F (65 °C) Green High 286 °F (141 °C) 225 °F (107 -C) Blue Sprinkler Finishes: Brass, Chrome, White Polyester, Black Polyester, Black PTFE, and ENT Corrosion -Resistant Coatings': White Polyester, Black Polyester, and Black PTFE. ENT in all temperature ratings except 135 °F (57 °C) Footnotes ' The sprinkler temperature rating is stamped on the deflector. 3 Based on NFPA-13. Other limits may apply, depending on fire loading, sprinkler location, and other requirements of the Authority Having Jurisdiction. Refer to specific installation standards. The corrosion -resistant coatings have passed the standard corrosion test required by the approving agencies indicated in the Approval Charts. These tests cannot and do not represent all possible corrosive environments. Prior to installation, verify through the end-user that the coatings are com- patible with or suitable for the proposed environment. For automatic sprinklers, the coatings indicated are applied to the exposed exterior surfaces only. Note that the spring is exposed on sprinklers with Polyester, PTFE, and ENT coatings. For ENT coated automatic sprinklers, the waterway is coated Sprinkler wrench If for recessed pe sprinklers ** A 1/2" ratchet is (not available frorr Carefully slide the wrench sideways around the protective cap, ensuring engagement Witt the sprinkler wrench flats Figure 2: Wrench 16036W/B for Recessed Pendent Sprinklers Form No. F_033314 Rev 14.1 Page 5 of 6 The Viking Corporation, 210 N Industrial Park Drive, Hastings MI 49058 Telephone: 269-945-9501 Technical Services: 877.384-5464 Fax: 269-818-1680 Email: techsvcs@vikingcorp,com Base Part Sprinkler Thread Size Nominal K -Factor Overall Length FM Approvals' SIN Number' Style NPT BSP U.S. I metric- Inches mm (Refer also to Design Criteria.) 12979 VK302 Pendent 1/2" 15 mm 5.6 80.6 2-1/4 58 A1Z, B1Y, D2X, C2 Approved Escutcheons Approved Temperature Ratings X - Standard surface -mounted escutcheon or the A - 135 -F (57 -C), 155 -F (68 °C), 175 -F (79 °C), 200 -F Viking Micromatic® Model , E-1 Recessed (93 °C), 286 -F (141 -C) Approved Finishes Escutcheon B - 135 -F (57 °C), 155 -F (68 °C), 175 -F (79 °C), and 1 -Brass, Chrome, White Polyester4, Y - Standard surface -mounted escutcheon or the 200 -F (93 "C) and Black Polyester4 Viking Microfast° Model F-1 Adjustable Escutcheon, C - 155 -F (68 -C), 175 -F (79 °C), 200 -F (93 °C), 286 2 - ENT5 or recessed with the Viking Micromatic® Model E-1 -F (141 °C) or E-2 Recessed Escutcheon D- 155 -F (68 °C), 175 -F (79 °C), 200 -F (93 °C) Z - Standard surface -mounted escutcheon or the Viking Microfast° Model F-1 Adjustable Escutcheon Footnotes ' Base part number shown. For complete part number, refer to Viking's current price schedule. ' Metric K -factor measurement shown is when pressure is measured in Bar. When pressure is measured in kPa, divide the metric K -factor shown by 10.0. ' This table shows the FM Approvals available at the time of printing. Other approvals may be in process. 4 Other colors are available on request with the same Approvals as the standard colors. 5 FM approved as corrosion resistant. FM Aporoval Requirements: The Viking Microfast® Quick Response Pendent Sprinkler VK302 is FM Approved as quick response Non -storage upright and pendent sprinklers as indicated in the FM Approval Guide. For specific application and installation requirements, reference the latest applicable FM Loss Prevention Data Sheets (including Data Sheet 2-0). FM Global Loss Prevention Data Sheets contain guidelines relating to, but not limited to: minimum water supply requirements, hydraulic design, ceiling slope and obstructions, minimum and maximum allowable spacing, and deflector distance below the ceiling. NOTE: The FM installation guidelines may differ from cULus and/or NFPA criteria. IMPORTANT: Always refer to Bulletin Form No. F_091699 - Care and Handling of Sprinklers. Also refer to page 0111-3 for general care, installation, and maintenance information. Viking sprinklers are to be installed in ac- cordance with the latest edition of Viking technical data, the appropriate standards of NFPA, FM Global, LPCB, APSAD, VdS or other similar organizations, and also with the provisions of governmental codes, ordinances, and standards, whenever applicable. Form No. F_033314 Rev 14.1 FireLock° STYLE 922 The Style 922 Outlet -T provides a convenient method of incorporating 1h, %, and V/15, 20 and 25 mm outlets for directly connecting sprinklers, drop nipples, sprigs, gauges, drains and other outlet products. Available for 11/4 through 76.1 mm/32 to 76.1 mm piping systems, Style 922 outlets are UL/ULC Listed, -PCR and FM Approved for branch connections and VdS Approved for direct sprinkler connection only on wet and dry systems. The locating collar engages into the hole prepared in the pipe. When tightened, the assembly compresses the gasket onto the OD of the pipe. The Style 922 Outlet -T is UL/FM rated up to 30Opsi/2068 kPa and VdS rated up to 16bar at the ambient temperatures typical for fire protection systems. Style 922 is suitable for use on standard, Iightwall, Schedule 5 and other specialty pipes' It is supplied with a clear, rust inhibitive coating. Contact Victaulic for other optional coatings. *Consult Section 10.01 for specific listings/approvals MATERIAL SPECIFICATIONS Housing: Ductile iron conforming to ASTM A-536, grade 65-45-12. Ductile iron conforming to ASTM A-395, grade 65-45-15, is available upon special request. JOB/OWNER System No.. Location Gasket: • Grade "E" EPDM - Type A (Violet color code). Firel-ock products have been Listed by Underwriters Laboratories Inc, and Approved by Factory Mutual Research for wet and dry (oil free air) sprinkler services up to the rated working pressure using the Grade "E" Type A Gasket System. Bolts/Nuts: Heat-treated plated carbon steel, trackhead meeting the physical and chemical requirements of ASTM A-449 and physical requirements of ASTM A-183. CONTRACTOR Submitted By www.victautic.com VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY.® 2009 VICTAULIC COMPANY. ALL RIGHTS RESERVED. REV_F ENGINEER Spec Sect Para Approved ✓ctaulid 10.52_1 IPS CARBON STEEL PIPE - HOLE CUT PRODUCTS FireLcck° Dutlet-T STYLE 922 PERFORMANCE www.victaulic.com VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. ® 2009 VICTAULIC COMPANY. ALL RIGHTS RESERVED. REV_F 10.52 ✓ctaulid 10,52_3 FireLock° STYLE 922 INSTALLATION Reference should always be made to the 1-100 Victaulic Field Installation Handbook for the product you are installing. Handbooks are included with each shipment of Victaulic products for complete installation and assembly data, and are available in PDF format on our website at www.victaulic.com. WARRANTY Refer to the Warranty section of the current Price List or contact Victaulic for details. NOTE This product shall be manufactured by Victaulic or to Victaulic specifications. All products to be installed in accordance with current Victaulic installation/assembly instructions. Victaulic reserves the right to change product specifications, designs and standard equipment without notice and without incurring obligations. For complete contact information, visit www.victaulic.com 10.52 3355 REV F UPDATED 212009 �Ct8UI-id VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. C 2009 VICTAULIC COMPANY ALL RIGHTS RESERVED. 10.52 IPS CARBON STEEL PIPE - HOLE CUT PRODUCTS f © _ STYLE 922 DIMENSIONS 10.52 t Victaulic female threaded products are designed to accommodate standard NPT or BSPT (optional) male pipe threads only. Use of male threaded products with special features, such as probes, dry pen- dent sprinklers, etc, should be verified as suitable for use with this Victaulic product. Failure to verify suitability in advance may result in assembly problems or leakage. *Center of run to engaged pipe end for NPT threads (dimensions are approximate). www.victaulic.com VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. 0 2009 VICTAULIC COMPANY ALL RIGHTS RESERVED. 10.52_2 �CtauliC REV F 00 1'/a h 1 Ym I30 1.83 1.70 3.87 2.56 I0 X 32 15 30.2 330 465 279 98.3 650 045 Y 1a 128 183 110 387 j 256 II 20 30.2 325 465 279 98.3_ 650 050 _ 1 10. 152 218 110 3.87 256 2 25 30.2 1 Fa 386 142 554 1.95 279 1 98.3 1,22 408 650 256 054 12 1 % 1/ X 40 15 30.2 1 361 49.5 310 103.6 650 054 Y 1 da 140 195 122 408 256 12 20 30.2 356 495 _ 310 103.6 650 054 1 lYa 764 l 2.30 122 408 256 } 13 25 30.2 14ia 417 166 584 219 310 103.6 146 460 650 2.56 059 1.3 2 'h X 50 15 30.2 42.2 55.6 37.1 1168' _.6 650 _ 059 3A _.64_-_ 1.64 219 1.46 4.60 256 1.4 20 302 302 417 556 37.7 1168 65.0 0.64 254 1 IMa 1.88 146 460 2.56 15 25 30.2 1/m 4].8 191 645 244 371 116.8 171 540 650 256 0.68 16 2'h V X 65 15 302 485 620 434 1372 650 013 Y 1 /m 189 244 171 540 256 16 ! 20 30.2 480 620 �_. 434 1372 650 073 1 1 1h, 213 279 171 1 540 1 256 16 25 30.2 lMa 54.1 191 709 1 244 434 1322 1JI 1 550 650 256 073 _ 16 '/z 76.1 mm X 15 30.2 485 620 434 J 1397 650 073 10a 189._..1 244 171 550 1 256 16 20 30.2 48_0 620 434 ` 1397_ 1 650 �.. 073 1 1%a 1 213 2.79 1.71 1i 550 2.56 1.7 25 302 541 70.9 1 43.4 1397 65.0 0.80 t Victaulic female threaded products are designed to accommodate standard NPT or BSPT (optional) male pipe threads only. Use of male threaded products with special features, such as probes, dry pen- dent sprinklers, etc, should be verified as suitable for use with this Victaulic product. Failure to verify suitability in advance may result in assembly problems or leakage. *Center of run to engaged pipe end for NPT threads (dimensions are approximate). www.victaulic.com VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. 0 2009 VICTAULIC COMPANY ALL RIGHTS RESERVED. 10.52_2 �CtauliC REV F Page 6 of 6 V I NG*® MICROFQUICK TECHNICALD• RESPONSESE PENDENT SPRINKLER VK302 (K5.6) The Viking Corporation, 210 N Industrial Park Drive, Hastings MI 49058 Telephone: 269-945-9501 Technical Services: 877-384-5464 Fax: 269-818-1680 Email: techsvcs@vikingcorp.com 1/2" (15 mm) NPT. 2-1/4" (57 mm Ceiling Opening Size: 2-5/16" (58.7 mm) minimum 2.1/2" (63.5 mm) maximum mm) 1-314" (51 mm) (3M n. (44. �mm) Max. T6 f Installed with a standard Installed with a Microfast Note: At maximum, adapter is 1/8" surface -mounted Model F-1 Adjustable exposed 1/2" (12.7 mm) from escutcheon Escutcheon face of ceiling Figure 3: Sprinkler Dimensions with a Standard Escutcheon and the Model F-1 Adjustable Escutcheon 2-1/8" (54 mm) 1-3/4" (44.5 mm) Lu Max. Ceiling Opening Size: 2.5-16" (58.7 mm) minimum 2.1/2" (63.5 mm) maximum Installed with a Model E-1 Recessed Escutcheon Installed with a Model E-2 Thread -on Recessed Escutcheon 8„ nm) 1. Figure 4: Sprinkler Dimensions with the Model E-1 and E-2 Recessed Escutcheons Form No. F033314 Rev 14.1 (New Page) Page 4 of 6 The Viking Corporation, 210 N Industrial Park Drive, Hastings MI 49058 Telephone: 269-945-9501 ,Technical Services: 877-384.5464 Fax: 269-818-1680 Email: techsvcs@vikingcorp.com Base (Refer also to Design Criteria.) Sprinkler Thread Size Nominal K -Factor Overall Length Listings and Approvals Part SIN Style Number NPT BSP U.S. metric' Inches mm cULus4 VdS LPCB r 12979 VK302 Pendent 1/2" 1 15 mm 5.6 1 80.6 2-1/4 58 At Z, B1Y, C2X, D2 I A3 I A3Z, B3Y D3Z, C3Y Approved Temperature Ratings Approved Finishes Approved Escutcheons A- 135 °F (57 °C), 155 °F (68 °C), 175 °F (79 1 - BrassChromeX - Standard surface -mounted escutcheon or the °C), 200 °F (93 °C), 286 °F (141 °C) , , White Viking Micromatic® Model E-1 Recessed Escutcheon B - 135 °F (57 °C), 155 °F (68 °C), 175 °F (79 Polyester", Black Polyesters s, Y - Standard surface -mounted escutcheon or the °C), and 200 °F (93 °C) and Black PTFE Viking Microfast® Model F-1 Adjustable Escutcheon, or C - 155 °F (68 'C), 175 °F (79 °C), and 200 °F 2 - ENT recessed with the Viking Micromatic® Model E-1 or E-2 (93 °C) 3 - Brass, Chrome, While Recessed Escutcheon D - 155 °F (68 -C), 175 °F 79 -C), 200 °F 93 Polyester' and Black Z - Standard surface -mounted escutcheon or the °C), 286 °F (141 °C) ( ) ( Polyesterbs Viking Microfast® Model F-1 Adjustable Escutcheon Footnotes ' Base pan number shown. For complete part number, refer to Viking's current price schedule. ] Metric K -factor measurement shown is when pressure is measured in Bar. When pressure is measured in kPa, divide the metric K -factor shown by 10.0. ' This table shows the listings and approvals available at the time of printing. Other approvals may be in process. 4 Listed by Underwriters Laboratories Inc. for use in the U.S. and Canada. 5 cULus Listed as corrosion -resistant. 6 Other colors are available on request with the same Listings and Approvals as the standard colors. ' CE Certified, Standard EN 12259-1, EC -certificate of conformity 0832 -CPD -2001. cLILus Listing Reauirements: The Viking Microfast® Quick Response Pendent Sprinkler VK302 is cULus Listed as indicated in the Approval Chart for installation in accordance with the latest edition of NFPA 13 for standard spray sprinklers. Designed for use in Light and Ordinary occupancies. The sprinkler installation rules contained in NFPA 13 for standard spray pendent sprinklers must be followed. IMPORTANT: Always refer to Bulletin Form No. F_091699 - Care and Handling of Sprinklers. Also refer to page QR1-3 for general care, installation, and maintenance information. Viking sprinklers are to be installed in accor- dance with the latest edition of Viking technical data, the appropriate standards of NFPA, LPCB, APSAD, VdS or other similar organizations, and also with the provisions of governmental codes, ordinances, and standards, whenever applicable. Form No. F_033314 Rev 14.1 Page 2 of 6 The Viking Corporation, 210 N Industrial Park Drive, Hastings MI 49058 Telephone: 269-945-9501 Technical Services: 877.384-5464 Fax: 269-818-1680 Email: techsvcs@vikingcorp.com Sprinkler Wrenches: A. Standard Wrench: Part No. 10896W/13 (available since 2000). B. Wrench for Recessed Pendent Sprinklers: Part No. 16036W/B** (available since 2011) C. Optional Protective Sprinkler Cap Remover/Escutcheon Installer Tool*** Part No. 15915 (available since 2010) **A %" ratchet is required (not available from Viking). ***Allows use from the floor by attaching a length of 1" diameter CPVC tubing to the tool. Ideal for sprinkler cabinets. Refer to Bulletin F_051808. Sprinkler Cabinets: A. Six -head capacity: Part No. 01724A (available since 1971) B. Twelve -head capacity: Part No. 01725A (available since 1971) 4. INSTALLATION Refer to appropriate NFPA Installation Standards. 5. OPERATION During fire conditions, the heat -sensitive liquid in the glass bulb expands, causing the glass to shatter, releasing the pip cap and sealing spring assembly. Water flowing through the sprinkler orifice strikes the sprinkler deflector, forming a uniform spray pattern to extinguish or control the fire. 6. INSPECTIONS, TESTS AND MAINTENANCE Refer to NFPA 25 for Inspection, Testing and Maintenance requirements. 7. AVAILABILITY The Viking Microfast° Quick Response Pendent Sprinkler VK302 is available through a network of domestic and international dis- tributors. See The Viking Corporation web site for the closest distributor or contact The Viking Corporation. 8. GUARANTEE For details of warranty, refer to Viking's current list price schedule or contact Viking directly. Protective Sprinkler Wrench Flat Clip ` \milt.J, �1 Protective Sprinkler a � Cap Figure 1: Standard Sprinkler Wrench 10896WIB Form No. F_033314 Rev 14.1 i - d14 Black Nut Driver Part k 8113910 #14 SW Red Nut Driver Part 4 8114910 Not less than 2'nominal width Not less than 3'nominal thickness (2-112') )depth ar side A vertical member) • No pre -drilling required. • Quick to install using the Sammy Nut Driver with an 18V cordless drill/driver. • Saves time from traditional methods. • Reduces installation costs. • Made in the U.S.A. 60 warm a ndao dzmonananon ar wwtv.ihvbuildeaccom 114" 8002957 GST 100 114 x V 210 (7116" OSB) 25 125 670 (314" Ply) 114" `8003057 IGBT 200 , .114 x 2 - _ 1760 (Fir)' - _ 25 '_';125 114" 8004957 GST 300 114 x 3" 2060 (Fir) 25 125 0 318" 8008957 GST 20 114 x 2" 1760 (Fir) 850 1475 25 125 f _ 318 8066925 - '.GST 20SS 2'114x2' '_ 1760 JHrt 850 25 125 ; .Q. 318" 8069925 GST 25-380 318 x 2-112" 2113 (Fir) 1500 25 125 8010957 `" -+OST 30 '_114 2060 {Fu) ; , 1500 1475:; 26 4:125 318" 8069925 GST 30 -SS 114x3" 2060 (Fir) 25 125 318 :8011926 - - GST 40 :1114 x 4" 1180 (Fir) - 25 --125 112" 8013925 GST 2 114 x 2" 1760 (Fir) 25 125 112 8014925 :GST 25380 r318x2-112 2113 (5r) _. 25 ,.125 _ 112" _ 8015925 GST 3 114 x 3" 2275 (Fir) 25 125 im VAMF 0S SPECIAL NUT DRIVER SYSTEM: The nut drivers were designed with a unique spin-off feature which provides a fast and safe installation each time. When the face of the driver comes into contact with the material you are installing into, continue drilling until nut driver spins free, Installation is then complete. Warranty requires the use of the appropriate nut driver for installations. Fig. 24 - Hanger for CPVC Plastic Pipe & IPS Steel Pipe** Double Fastener Strap Side Mounted (cooper B -Line 63163) Size Range: 3/4" (20mm) thru 2" (5omm) CPVC pipe Material: Pre -Galvanized Steel Function: Intended to perform as a hanger to support CPVC piping used in automatic fire sprinkler systems. Can be installed on the top or on the bottom of a beam. Approvals: Underwriters Laboratories Listed in the USA (UL) and Canada (cUL) to support fire sprinkler piping. May be installed in wood using fasteners supplied with product, or into minimum 20 gauge (0.912mm) steel using (2) 1/4" x 1" tek type screws. Meets and exceeds the requirements of NFPA 13, 13R and 13D. Features: Fig. 24 incorporates features which protect the pipe and ease installation. The flared edge design protects the CPVC pipe from any rough surface. Easily attaches to the building structure using the two UL Listed hex head self threading screws` furnished with the product. It is recommended that rechargeable electric drills fitted with a hex socket attachment be used as installation tools. No impact tools (such as a hammer) are allowed. Damage has been known to result from installations using impact type tools. No pre -drilling of a pilot hole in wood is required. Finish: Pre -Galvanized Order By: Figure number and pipe size * Hardened hex head self threading screw is furnished with the product and is the minimum fastener size acceptable. ** With reduced spacing, consult factory. c&S LISTED Fig. 25 - Surge Restrainer Size Range: — One size fits 3/4" (2omm) thru 2" (4omm) pipe. Material: — Pre -Galvanized Steel Function: — Designed to be used in conjunction with Fig. 200 band hangers to restrict the upward movement of piping as it occurs during sprinkler head activation or earthquake type activity. The surge restrainer is easily and efficiently installed by snapping into a locking position on the band hanger. This product is intended to satisfy the requirements as indicated in the National Fire Protection Association NFPA 13, 2010 edition, 9.2.3.4.4.1 and 9.2.3.4.4.4 Can be used to restrain either steel pipe or CPVC plastic Pipe. Approvals: — Underwriters Laboratories Listed only when used with band hanger Fig. 200, in the USA (UL) and Canada (cUL). Finish: Pre -Galvanized Order By: Figure number and band hanger, size from 3/4" (2omm) thru 2" (40mm). Patent #5,344,108 c@us 1.1STED All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. I COOpERB-Line Max. Hanger Fastener Hex „ Approx.CPVC Pipe tt MW.,.x x�.- / ' 3 /4" (20) 5 2 /16" (58.7) 5 1 /32" (27.8) 3 1 /16' (30.2) 1 5 /2 (1.67) 5 /16" Q.9) 9 (4.1) (25 25/8 (667):, 15/16 ..(33.3) 13/16" 30.2 6 (1.83) 5h6 (7.9) 9:. (4.1).. (32) 3" (76.2) 11/2" (38.1) 13/16" (30.2) 61/2 (1.98) 5/16" (7.9) 11 (5.0) „Z4"I?/2;''7• 11/2" (40): 31/4" (82.5)- 15/8" ,(423) 13/16". (302)':.7 (2.13)- 5/16'_ (7.9) 12 '(5.4). (50) 311/16" (93.7) 127/32" (43.6) 13/16" (30.2) 8 (244) 5/16" (7.9) 15 (6.8) Fig. 25 - Surge Restrainer Size Range: — One size fits 3/4" (2omm) thru 2" (4omm) pipe. Material: — Pre -Galvanized Steel Function: — Designed to be used in conjunction with Fig. 200 band hangers to restrict the upward movement of piping as it occurs during sprinkler head activation or earthquake type activity. The surge restrainer is easily and efficiently installed by snapping into a locking position on the band hanger. This product is intended to satisfy the requirements as indicated in the National Fire Protection Association NFPA 13, 2010 edition, 9.2.3.4.4.1 and 9.2.3.4.4.4 Can be used to restrain either steel pipe or CPVC plastic Pipe. Approvals: — Underwriters Laboratories Listed only when used with band hanger Fig. 200, in the USA (UL) and Canada (cUL). Finish: Pre -Galvanized Order By: Figure number and band hanger, size from 3/4" (2omm) thru 2" (40mm). Patent #5,344,108 c@us 1.1STED All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. I COOpERB-Line