Loading...
HomeMy WebLinkAbout20220309_PLANS_APPROVEDS. HawkeDRAWING NO:DATE:CUSTOMER APPROVAL:DATE:Rev. #1Rev. #2Rev. #3DATEBYRev. #4Rev. #5Rev. #6DATEBYTHIS IS AN ORIGINAL UNPUBLISHED DRAWING CREATED FOR YOUR PERSONAL USE IN CONNECTION WITH A PROJECT PLANNED FOR YOU BY CUMMINGS SIGNS. IT IS NOT TO BE SHOWN OUTSIDE YOUR ORGANIZATION NOR USED, REPRODUCED, COPIED, OR EXHIBITED IN ANY FASHION UNLESS AUTHORIZED IN WRITING BY AN OFFICER OF CUMMINGS SIGNS.Customer creation through brand innovation.THIS DESIGN REMAINS OUR EXCLUSIVE PROPERTY ANDCANNOT BE DUPLICATED WITHOUT WRITTEN CONSENTELEVATIONS3-1-2022106502.08TACO BELL 315121400 WEST COAST HIGHWAYNEWPORT BEACH, CAQTY. DESCRIPTION SQ. FT.1 SMALL SWINGING BELL W/10” LETTERS 13.81 MEDIUM SWINGING BELL W/12“ LTRS. 33.21 LARGE SWINGING BELL 13.53 LED COPING2 P93 PYLON REPLACEMENT FACES 99.21 CANOPY COVER - CUSTOM CUSTOM DIRECTIONAL FACE REPLACEMENTSBCQRPVACQPRABZZ44 sq. ft.EXISTING MENUBOARDPA2021-124ZONING ADMINISTRATOR ACTION 03/09/2022 - APPROVED (10 PAGES) S. HawkeDRAWING NO:DATE:CUSTOMER APPROVAL:DATE:Rev. #1Rev. #2Rev. #3DATEBYRev. #4Rev. #5Rev. #6DATEBYTHIS IS AN ORIGINAL UNPUBLISHED DRAWING CREATED FOR YOUR PERSONAL USE IN CONNECTION WITH A PROJECT PLANNED FOR YOU BY CUMMINGS SIGNS. IT IS NOT TO BE SHOWN OUTSIDE YOUR ORGANIZATION NOR USED, REPRODUCED, COPIED, OR EXHIBITED IN ANY FASHION UNLESS AUTHORIZED IN WRITING BY AN OFFICER OF CUMMINGS SIGNS.Customer creation through brand innovation.THIS DESIGN REMAINS OUR EXCLUSIVE PROPERTY ANDCANNOT BE DUPLICATED WITHOUT WRITTEN CONSENTELEVATIONS3-1-2022106502.08TACO BELL 315121400 WEST COAST HIGHWAYNEWPORT BEACH, CAscale: 1/8” = 1’-0”scale: 1/8” = 1’-0”12’-3”B.O. LETTER SET13’-8”B.O. BELL17’-6”ABQTY. DESCRIPTION SQ. FT.1 SMALL SWINGING BELL W/10” LETTERS 13.81 MEDIUM SWINGING BELL W/12“ LTRS. 33.21 LARGE SWINGING BELL 13.53 LED COPING2 P93 PYLON REPLACEMENT FACES 99.21 CANOPY COVER - CUSTOM CUSTOM DIRECTIONAL FACE REPLACEMENTSBCQRPVAPA2021-124ZONING ADMINISTRATOR ACTION 03/09/2022 - APPROVED (10 PAGES) S. HawkeDRAWING NO:DATE:CUSTOMER APPROVAL:DATE:Rev. #1Rev. #2Rev. #3DATEBYRev. #4Rev. #5Rev. #6DATEBYTHIS IS AN ORIGINAL UNPUBLISHED DRAWING CREATED FOR YOUR PERSONAL USE IN CONNECTION WITH A PROJECT PLANNED FOR YOU BY CUMMINGS SIGNS. IT IS NOT TO BE SHOWN OUTSIDE YOUR ORGANIZATION NOR USED, REPRODUCED, COPIED, OR EXHIBITED IN ANY FASHION UNLESS AUTHORIZED IN WRITING BY AN OFFICER OF CUMMINGS SIGNS.Customer creation through brand innovation.THIS DESIGN REMAINS OUR EXCLUSIVE PROPERTY ANDCANNOT BE DUPLICATED WITHOUT WRITTEN CONSENTELEVATIONS3-1-2022106502.08TACO BELL 315121400 WEST COAST HIGHWAYNEWPORT BEACH, CAQscale: 1/8” = 1’-0”scale: 1/8” = 1’-0”10’-3”B.O. BELL17’-6”CQexisting wall mural - North Elevationexisting wall mural - South ElevationQTY. DESCRIPTION SQ. FT.1 SMALL SWINGING BELL W/10” LETTERS 13.81 MEDIUM SWINGING BELL W/12“ LTRS. 33.21 LARGE SWINGING BELL 13.53 LED COPING2 P93 PYLON REPLACEMENT FACES 99.21 CANOPY COVER - CUSTOM CUSTOM DIRECTIONAL FACE REPLACEMENTSBCQRPVAPA2021-124ZONING ADMINISTRATOR ACTION 03/09/2022 - APPROVED (10 PAGES) APART # 823-EN-30-BELL-PUR2-5-2021S. HawkeDRAWING NO:DATE:CUSTOMER APPROVAL:DATE:Rev. #1Rev. #2Rev. #3DATEBYRev. #4Rev. #5Rev. #6DATEBY105581.00CTHIS IS AN ORIGINAL UNPUBLISHED DRAWING CREATED FOR YOUR PERSONAL USE IN CONNECTION WITH A PROJECT PLANNED FOR YOU BY CUMMINGS SIGNS. IT IS NOT TO BE SHOWN OUTSIDE YOUR ORGANIZATION NOR USED, REPRODUCED, COPIED, OR EXHIBITED IN ANY FASHION UNLESS AUTHORIZED IN WRITING BY AN OFFICER OF CUMMINGS SIGNS.THIS DESIGN REMAINS OUR EXCLUSIVE PROPERTY ANDCANNOT BE DUPLICATED WITHOUT WRITTEN CONSENTCOLOR PANTONE 3M VINYL PAINTDark Purple PMS 2603C 3M 3630-9327Light Purple PMS 2577C 3M 3630-9141Black Pantone BlackWhite Pantone White 3M 3630-20 SW2123TB Bronze Tiger Drylac 49-66230 C33Status Bronze SW7034Urbane Bronze SW7048GRAPHIC & COLOR SPECIFICATIONS:5672’-6” (762MM)2’-9 1/8” (841MM)4’-7 3/4”10”3’-0” Materials• Cabinet: .050 [2mm] aluminum returns w/ black finish • .090 [2mm] aluminum back• 1" [25mm] black trim cap• Face: .177 [5mm] 7328 white acrylic with 1st surface vinyl graphics (with UV overlaminate) ELECTRICAL/ PERFORMANCE SPECIFICATIONS• UL & NEC approval required• 12V, Class II UL approved system• If alternate LED’s are used:• 50,000 hour system where no greater than 30% lumen depreciation is experienced at 50K hours• Thermally managed surface mount devices (SMD)LED(s): (22) AgiLight LS-PRO160-50K-2B1 White (5000K)LEDs (11 ft) or equivalent - pre-approval requiredPower Supply: (1) 12V/60W LED Power Supply @ 0.9 ampsTotal Load: 0.9 ampsCircuits(s): (1) 20 amp-120VSPECIFICATIONSTYPICALWALL SECTION FORINTERIOR APPLICATIONTYPICALWALL SECTION FOREXTERIOR APPLICATION.177 [5mm] 7328 WHITE ACRYLIC FACE WITH 1ST SURFACE VINYLGRAPHICS (WITH UV OVERLAMINATE).090 [2mm] ALUM. BACKAGILIGHTLS-PRO160-50K-2B1WHITE LED MODULE, TYP.POWER SUPPLY.050 [2mm] ALUM. RETURNS1/4” [6mm] DIA. WEEP HOLEWEEP HOLE NOT USEDFOR INTERIOR APPLICATIONBUILDING FINISHN.T.S.1" [25mm] TRIM CAP3” [76mm]SEAL ALL WALL PENETRATIONS TO PREVENT WATER INTRUSION AS FOLLOWS: INSTALL BUSHING AFTER E.I.F.S. APPLICATION HAS HARDENED. DRILL HOLE SLIGHTLY LARGER THAN BUSHING THROUGH INSULATION ONLY. STOP AT PLYWOOD. CAULK OPENING PRIOR TO INSERTING FASTENER TO SEAL PENETRATION.1/2” [13mm] DIA. PIPE SPACER3/8” [10mm] DIA. FASTENERWITH NUT, FLAT &LOCK WASHERTO PRIMARYPOWER SUPPLYWALL STUD ON16” [406mm] CTRS.WOOD BLOCKING3/8” [10mm] DIA. SNAPTOGGLEWALLANCHOR BY TOGGLERSYSTEMS W/ HARDWAREWALL STUD ON16” [406mm] CTRS.5/8” [16mm] MIN. DRYWALLPLYWOOD SHEATHING3" [76mm]TYPICAL SECTIONSEAL ALL WALL PENETRATIONS TO PREVENT WATER INTRUSION AS FOLLOWS: INSTALL BUSHING AFTER E.I.F.S. APPLICATION HAS HARDENED. DRILL HOLE SLIGHTLY LARGER THAN BUSHING THROUGH INSULATION ONLY. STOP AT PLYWOOD. CAULK OPENING PRIOR TO INSERTING FASTENER TO SEAL PENETRATION.1/2” [13mm] DIA. PIPE SPACER3/8” [10mm] DIA. FASTENERWITH NUT, FLAT &LOCK WASHERTO REMOTEPOWER SUPPLYWALL STUD ON16” [406mm] CTRS.PLYWOOD SHEATHINGWOOD BLOCKING.150 [4mm] 7328 WHITE HIGH-IMPACTACRYLICACR.063 [2mm] ALUM. BACK3/4" [19mm] TRIM CAP.040 [1mm] ALUM. RETURNS1/4” [6mm] DIA. WEEP HOLEBUILDING FINISHMaterials• Cabinet: .040 [1mm] aluminum returns w/ black finish and .063aluminum back• 3/4" [19mm] black trim cap• Face: .150 [4mm] 7328 white acrylicRemovable faceELECTRICAL/ PERFORMANCE SPECIFICATIONS• UL & NEC approval required• 12V, Class II UL approved system• If alternate LED’s are used:• 50,000 hour system where no greater than 30% lumen depreciation is experienced at 50K hours• Thermally managed surface mount devices (SMD)LED(s): AgiLight LS-PRO160-65K-2B1 White (6500K)LEDs (20 ft) or equivalent - pre-approval requiredPower Supply: (1) 12V/60W LED Power Supply @ 0.9 amps- Remotely LocatedTotal Load: 0.9 ampsCircuits(s): (1) 20 amp-120VSPECIFICATIONSLETTERSPART # 823-18-CL10-TB-LN-WH13.8 sq. ft.PA2021-124ZONING ADMINISTRATOR ACTION 03/09/2022 - APPROVED (10 PAGES) BALTERNATE LAYOUT CONFIGURATION3" [76mm]SEAL ALL WALL PENETRATIONS TO PREVENT WATER INTRUSION AS FOLLOWS: INSTALL BUSHING AFTER E.I.F.S. APPLICATION HAS HARDENED. DRILL HOLE SLIGHTLY LARGER THAN BUSHING THROUGH INSULATION ONLY. STOP AT PLYWOOD. CAULK OPENING PRIOR TO INSERTING FASTENER TO SEAL PENETRATION.1/2” [13mm] DIA. PIPE SPACER3/8” [10mm] DIA. FASTENER W/ NUT, FLAT & LOCK WASHERWALL STUD ON16” [406mm] CTRS.WALL STUD ON16” [406mm] CTRS.PLYWOOD SHEATHING5/8” [16mm] MIN. DRYWALLWOOD BLOCKING.150 [4mm] DULITE DAY-NIGHT ACRYLICTO REMOTEPOWER SUPPLY.063 [2mm] ALUM. BACK3/4" [19mm] TRIM CAP.040 [1mm] ALUM. RETURNSBUILDING FINISH1/4” [6mm] DIA. WEEP HOLEWEEP HOLE NOT USEDFOR INTERIOR APPLICATION3/8” [10mm] DIA. SNAPTOGGLEWALLANCHOR BY TOGGLERSYSTEMS W/ HARDWARETYPICAL WALL SECTION FORINTERIOR APPLICATIONTYPICAL WALL SECTION FOREXTERIOR APPLICATIONMaterials• Cabinet: .040 [1mm] aluminum returns w/ black finish and .063aluminum back• 3/4" [19mm] black trim cap• Face: .150 [4mm] DuLite Day-Night Acrylic• Removable faceELECTRICAL/ PERFORMANCE SPECIFICATIONS• UL & NEC approval required• 12V, Class II UL approved system• If alternate LED’s are used:• 50,000 hour system where no greater than 30% lumen depreciation is experienced at 50K hours• Thermally managed surface mount devices (SMD)LED(s): (42) AgiLight LS-PRO160-50K-2B1 White (5000K)LEDs (21 ft) or equivalent - pre-approval requiredPower Supply: (1) 12V/60W LED Power Supply @ 0.9 amps- Remotely LocatedTotal Load: 0.9 ampsSPECIFICATIONS7'-3 7/8" [2232mm]12" [305mm]3'-7 3/4" [1111mm]3'-3 3/8" [1000mm]V-04.36PART # 823-EN-36-BELL-PUR2-5-2021S. HawkeDRAWING NO:DATE:CUSTOMER APPROVAL:DATE:Rev. #1Rev. #2Rev. #3DATEBYRev. #4Rev. #5Rev. #6DATEBY105581.00BTHIS IS AN ORIGINAL UNPUBLISHED DRAWING CREATED FOR YOUR PERSONAL USE IN CONNECTION WITH A PROJECT PLANNED FOR YOU BY CUMMINGS SIGNS. IT IS NOT TO BE SHOWN OUTSIDE YOUR ORGANIZATION NOR USED, REPRODUCED, COPIED, OR EXHIBITED IN ANY FASHION UNLESS AUTHORIZED IN WRITING BY AN OFFICER OF CUMMINGS SIGNS.THIS DESIGN REMAINS OUR EXCLUSIVE PROPERTY ANDCANNOT BE DUPLICATED WITHOUT WRITTEN CONSENTMedium Swinging BellCOLOR PANTONE 3M VINYL PAINTDark Purple PMS 2603C 3M 3630-9327Light Purple PMS 2577C 3M 3630-9141Black Pantone BlackWhite Pantone White 3M 3630-20 SW2123TB Bronze Tiger Drylac 49-66230 C33Status Bronze SW7034Urbane Bronze SW7048GRAPHIC & COLOR SPECIFICATIONS:5673'-0" [914mm]3'-3 3/4" [1010mm]4’-7”Materials• Cabinet: .050 [2mm] aluminum returns w/ black finish • .090 [2mm] aluminum back• 1" [25mm] black trim cap• Face: .177 [5mm] 7328 white acrylic with 1st surface vinyl graphics (with UV overlaminate) ELECTRICAL/ PERFORMANCE SPECIFICATIONS• UL & NEC approval required• 12V, Class II UL approved system• If alternate LED’s are used:• 50,000 hour system where no greater than 30% lumen depreciation is experienced at 50K hours• Thermally managed surface mount devices (SMD)LED(s): (35) AgiLight LS-PRO160-50K-2B1 White (5000K)LEDs (18 ft) or equivalent - pre-approval requiredPower Supply: (1) 12V/60W LED Power Supply @ 0.9 ampsTotal Load: 0.9 ampsCircuits(s): (1) 20 amp-120VSPECIFICATIONSTYPICALWALL SECTION FORINTERIOR APPLICATIONTYPICALWALL SECTION FOREXTERIOR APPLICATION.177 [5mm] 7328 WHITE ACRYLIC FACE WITH 1ST SURFACE VINYLGRAPHICS (WITH UV OVERLAMINATE).090 [2mm] ALUM. BACKAGILIGHTLS-PRO160-50K-2B1WHITE LED MODULE, TYP.POWER SUPPLY.050 [2mm] ALUM. RETURNS1/4” [6mm] DIA. WEEP HOLEWEEP HOLE NOT USEDFOR INTERIOR APPLICATIONBUILDING FINISHN.T.S.1" [25mm] TRIM CAP3” [76mm]SEAL ALL WALL PENETRATIONS TO PREVENT WATER INTRUSION AS FOLLOWS: INSTALL BUSHING AFTER E.I.F.S. APPLICATION HAS HARDENED. DRILL HOLE SLIGHTLY LARGER THAN BUSHING THROUGH INSULATION ONLY. STOP AT PLYWOOD. CAULK OPENING PRIOR TO INSERTING FASTENER TO SEAL PENETRATION.1/2” [13mm] DIA. PIPE SPACER3/8” [10mm] DIA. FASTENERWITH NUT, FLAT &LOCK WASHERTO PRIMARYPOWER SUPPLYWALL STUD ON16” [406mm] CTRS.WOOD BLOCKING3/8” [10mm] DIA. SNAPTOGGLEWALLANCHOR BY TOGGLERSYSTEMS W/ HARDWAREWALL STUD ON16” [406mm] CTRS.5/8” [16mm] MIN. DRYWALLPLYWOOD SHEATHING33.2 sq. ft.PA2021-124ZONING ADMINISTRATOR ACTION 03/09/2022 - APPROVED (10 PAGES) CV-04.42PART # 823-EN-42-BELL-PUR2-5-2021S. HawkeDRAWING NO:DATE:CUSTOMER APPROVAL:DATE:Rev. #1Rev. #2Rev. #3DATEBYRev. #4Rev. #5Rev. #6DATEBY105581.00ATHIS IS AN ORIGINAL UNPUBLISHED DRAWING CREATED FOR YOUR PERSONAL USE IN CONNECTION WITH A PROJECT PLANNED FOR YOU BY CUMMINGS SIGNS. IT IS NOT TO BE SHOWN OUTSIDE YOUR ORGANIZATION NOR USED, REPRODUCED, COPIED, OR EXHIBITED IN ANY FASHION UNLESS AUTHORIZED IN WRITING BY AN OFFICER OF CUMMINGS SIGNS.THIS DESIGN REMAINS OUR EXCLUSIVE PROPERTY ANDCANNOT BE DUPLICATED WITHOUT WRITTEN CONSENTLarge Swinging BellCOLOR PANTONE 3M VINYL PAINTDark Purple PMS 2603C 3M 3630-9327Light Purple PMS 2577C 3M 3630-9141Black Pantone BlackWhite Pantone White 3M 3630-20 SW2123TB Bronze Tiger Drylac 49-66230 C33Status Bronze SW7034Urbane Bronze SW7048GRAPHIC & COLOR SPECIFICATIONS:5673'-6" [1067mm]3'-10 3/8" [1178mm]FRONT VIEWDESIGN PARAMETERS• Structural adequacy shall be the manufacturer's responsibility using the following criteria:• 100 MPH 3 second gust wind speed per ASCE 7-05 (130 MPH - ASCE 7-10). Category II, Exposure C. Components & Cladding, Zone 5.• Attachment may vary based on wall conditions.• Compliant with national building codes and standards (IBC 2009, IBC 2015, AISC 14th Edition, ASCE 7-05, ASCE 7-10, ACI & Aluminum Design Manual).• Refer to written documentation for material specifications.Materials• Cabinet: .050 [2mm] aluminum returns w/ black finish • .090 [2mm] aluminum back• 1" [25mm] black trim cap• Face: .177 [5mm] 7328 white acrylic with 1st surface vinyl graphics (with UV overlaminate) Area• Squared: 13.53 sf • Actual: 11.92 sfELECTRICAL/ PERFORMANCE SPECIFICATIONS• UL & NEC approval required• 12V, Class II UL approved system• If alternate LED’s are used:• 50,000 hour system where no greater than 30% lumen depreciation is experienced at 50K hours• Thermally managed surface mount devices (SMD)LED(s): (49) AgiLight LS-PRO160-50K-2B1 White (5000K)LEDs (25 ft) or equivalent - pre-approval requiredPower Supply: (1) 12V/60W LED Power Supply @ 0.9 ampsTotal Load: 0.9 ampsCircuits(s): (1) 20 amp-120VSPECIFICATIONSTYPICALWALL SECTION FORINTERIOR APPLICATIONTYPICALWALL SECTION FOREXTERIOR APPLICATION.177 [5mm] 7328 WHITE ACRYLIC FACE WITH 1ST SURFACE VINYLGRAPHICS (WITH UV OVERLAMINATE).090 [2mm] ALUM. BACKAGILIGHTLS-PRO160-50K-2B1WHITE LED MODULE, TYP.POWER SUPPLY.050 [2mm] ALUM. RETURNS1/4” [6mm] DIA. WEEP HOLEWEEP HOLE NOT USEDFOR INTERIOR APPLICATIONBUILDING FINISHN.T.S.1" [25mm] TRIM CAP3” [76mm]SEAL ALL WALL PENETRATIONS TO PREVENT WATER INTRUSION AS FOLLOWS: INSTALL BUSHING AFTER E.I.F.S. APPLICATION HAS HARDENED. DRILL HOLE SLIGHTLY LARGER THAN BUSHING THROUGH INSULATION ONLY. STOP AT PLYWOOD. CAULK OPENING PRIOR TO INSERTING FASTENER TO SEAL PENETRATION.1/2” [13mm] DIA. PIPE SPACER3/8” [10mm] DIA. FASTENERWITH NUT, FLAT &LOCK WASHERTO PRIMARYPOWER SUPPLYWALL STUD ON16” [406mm] CTRS.WOOD BLOCKING3/8” [10mm] DIA. SNAPTOGGLEWALLANCHOR BY TOGGLERSYSTEMS W/ HARDWAREWALL STUD ON16” [406mm] CTRS.5/8” [16mm] MIN. DRYWALLPLYWOOD SHEATHING13.53 sq. ft.PA2021-124ZONING ADMINISTRATOR ACTION 03/09/2022 - APPROVED (10 PAGES) PP93 PYLON REPLACEMENT FACE3-1-2022S. HawkeDRAWING NO:DATE:CUSTOMER APPROVAL:DATE:Rev. #1Rev. #2Rev. #3DATEBYRev. #4Rev. #5Rev. #6DATEBY106502.08PTHIS IS AN ORIGINAL UNPUBLISHED DRAWING CREATED FOR YOUR PERSONAL USE IN CONNECTION WITH A PROJECT PLANNED FOR YOU BY CUMMINGS SIGNS. IT IS NOT TO BE SHOWN OUTSIDE YOUR ORGANIZATION NOR USED, REPRODUCED, COPIED, OR EXHIBITED IN ANY FASHION UNLESS AUTHORIZED IN WRITING BY AN OFFICER OF CUMMINGS SIGNS.Customer creation through brand innovation.THIS DESIGN REMAINS OUR EXCLUSIVE PROPERTY ANDCANNOT BE DUPLICATED WITHOUT WRITTEN CONSENT12'-3" 8'-1" Cabinet• Extruded aluminum frame, 10" [254mm] deep with 2" [51mm] retainer• Aluminum painted fillers• .177 [5mm] pan-formed clear SG polycarbonate face with debossed reinforcement at main ID face - 2nd surface vinyl decoration.• .150 [4mm] pan-formed SG polycarbonate face at breakfast face• Faces pinned into the retainer with mechanical fasteners as required• Hingeable access for serviceELECTRICAL/ PERFORMANCE SPECIFICATIONS• UL & NEC approval required.• 12V, Class II UL approved system.• If alternate LED’s are used:• 50,000 hour system where no greater than 30% lumen depreciation is experienced at 50K hours.• Thermally managed surface mount devices (SMD).Cabinet:LED(s): (8) AgiLight LS-RTRZ5-120-50K-G3 RetroRayz 500 Light Bars (1) AgiLight LS-RTRZ5-084-50K-G3 RetroRayz 500 Light Bar(1) AgiLight LS-RTRZ5-060-50K-G3 RetroRayz 500 Light Bar Power Supply: (10) 12V/60W LED Power Supplies @ 0.9 amps ea.Total Load: 9.6 ampsCircuits(s): (1) 20 amp-120VSPECIFICATIONSCOLOR PANTONE PVINYL AINTDark Purple PMS 2603CBlack Pantone BlackWhite Pantone White 3M 3630-20 SW2123GRAPHIC & COLOR SPECIFICATIONS:3M 3630-9327EXISTINGPROPOSEDPA2021-124ZONING ADMINISTRATOR ACTION 03/09/2022 - APPROVED (10 PAGES) Q2-14-2022S. HawkeDRAWING NO:DATE:CUSTOMER APPROVAL:DATE:Rev. #1Rev. #2Rev. #3DATEBYRev. #4Rev. #5Rev. #6DATEBY106502.06QTHIS IS AN ORIGINAL UNPUBLISHED DRAWING CREATED FOR YOUR PERSONAL USE IN CONNECTION WITH A PROJECT PLANNED FOR YOU BY CUMMINGS SIGNS. IT IS NOT TO BE SHOWN OUTSIDE YOUR ORGANIZATION NOR USED, REPRODUCED, COPIED, OR EXHIBITED IN ANY FASHION UNLESS AUTHORIZED IN WRITING BY AN OFFICER OF CUMMINGS SIGNS.Customer creation through brand innovation.THIS DESIGN REMAINS OUR EXCLUSIVE PROPERTY ANDCANNOT BE DUPLICATED WITHOUT WRITTEN CONSENT9 7/8" 9’-8 5/8” EXISTINGPROPOSEDALUMINUM COVER TO MOUNT TO FACEOF EXISTING CANOPY TO COVER ROUTEDOPENING.SIZE MAY NEED TO CHANGE DEPENDINGON INSTALLATION METHOD.SIZE SHOWN IS FACE SIZE ONLY - ANY ADDITIONALMATERIAL REQUIRED TO BEND OVER THE TOPAND BOTTOM FOR MOUNTING T.B.D. BY MFG/ENGR.SW7033 BRAINSTORM BRONZEPA2021-124ZONING ADMINISTRATOR ACTION 03/09/2022 - APPROVED (10 PAGES) R3-8-2021S. HawkeDRAWING NO:DATE:CUSTOMER APPROVAL:DATE:Rev. #1Rev. #2Rev. #3DATEBYRev. #4Rev. #5Rev. #6DATEBY106502.01RTHIS IS AN ORIGINAL UNPUBLISHED DRAWING CREATED FOR YOUR PERSONAL USE IN CONNECTION WITH A PROJECT PLANNED FOR YOU BY CUMMINGS SIGNS. IT IS NOT TO BE SHOWN OUTSIDE YOUR ORGANIZATION NOR USED, REPRODUCED, COPIED, OR EXHIBITED IN ANY FASHION UNLESS AUTHORIZED IN WRITING BY AN OFFICER OF CUMMINGS SIGNS.THIS DESIGN REMAINS OUR EXCLUSIVE PROPERTY ANDCANNOT BE DUPLICATED WITHOUT WRITTEN CONSENTCUSTOM DIRECTIONAL REPLACEMENT FACES.1’-7 1/2”2’-7 1/2PA2021-124ZONING ADMINISTRATOR ACTION 03/09/2022 - APPROVED (10 PAGES) PA2021-124 ZONING ADMINISTRATOR ACTION 03/09/2022 - APPROVED (10 PAGES)