HomeMy WebLinkAboutPA2020-356_20210506_PLANS_APPROVEDPA2020-356 Attachment No. PC 5 - Project Plans
54
18" x 60"8" x 6018" x 48"8" x 418" x 60"8" x 6018" x 48"8" x 418" x 60"8" x 6018" x 60"8" x 60 18" x 60"8" x 60
18" x 36"" x 3
18" x 48"8"x4x 484484884442154/5T/8021545T/8
COOLER
102
F8
COOKLINEL
101
F12
F4
R1
F13
SS2
SS3
F10F11
E1
E1
WW1
4'-6"
WW2
F9
F5
F3
IN ATTICABOVESODA
18361833F47
F46
F15
F16
F17
SS4
F18
F19 F20
F22
F23
F24
F25
F7
F6
COUNTER TOP@ +34"
PASS COUNTER@ +42"
COUNTER TOP@ +36"
TOP OF SNEEZEGUARD@ +67"
SS1
HSHHHH@ +ERNT+3
F34 F33 F32 F31 F9 4'-2"F30F35F9F36F37
SS9
SS5
SS6
SS7
F38F39
SS10
F43
F40
F42
R
ICEEIICIICICCCC R2
F45
F44
F48
27"x48"(4)27"x48"(4)27"x48"(4)
27"x48"(4)
27"x27"
(2)
27"x48"(4)
27"x27"
(2)
27"x48"(4)
F42
F5
E1
SS8
S
HS
SS11
SS12
SS11
13'-3"6'-6" sneeze guardguaruu6ZEEEEEEE +67" from F.F.715'-5" snneze guard e m
3'-0"sneeze guardseuezeSCALE:
=1'-0"K1EQUIPMENT FLOOR PLAN 11/4
EQUIPMENT
FLOOR
PLAN
T R U ENORTH
N O R T H
P L A N
3198-G AIRPORT LOOP DR.COSTA MESA, CA 92626PHONE: (714) 979-8385
FAX: (714) 979-6430WWW.HATCHDESIGN.COM
JOB NO. LGR84SUPER PANGA2110 WEST OCEAN FRONTNEWPORT BEACH, CA. 92661The Drawings, Specifications, and other Documentsprepared by HDG herein are HDG's Instruments ofService. The Instruments of Service are speciallydesigned by HDG for this Project and are intended foruse by Client solely with respect with this Project. HDGis the author of the Instruments of Service and, unless
otherwise provided by HDG, HDG shall retain all
common law, statutory, and other rights in the
Instruments of Service, including any and all
copyrights.
GENERAL NOTESAny errors, omissions, and ambiguities in Drawingsand Specifications shall be reported to HDG forimmediate remedy. Contractor and manufacturer shallhold HDG in indemnity for any and all errors,omissions, or ambiguities which should have been
discovered during the design process.
MANUFACTURERS
The Drawings and Specifications herein are submitted
only as a guide for the manufacturer. All verification is
the obligation of the manufacturer and will notwarrant additional compensation for re-fabrication orrepair due to deviations from actual measurements. Itis the responsibility of the manufacturer to fabricateintended design in accordance with accepted goodpractice and to inform HDG if Drawings orSpecifications are not practical or structurally sound.
Proper safety and construction is the responsibility of
the manufacturer.
CONSULTANTS
HDG is not a licensed architecture or engineering firm
and does not purport to be architects or engineers. Allinformation shown herein is derived from availablearchitectural information. Physical verification is theresponsibility of the architect. HDG accepts noresponsibility for any modifications or alterationsmade to Drawings and Specifications by another partyregardless of changes made to accommodatenecessary local building codes, ordinances, structural
conditions, or changes in equipment.
02/24/2021 - BID SET
03/10/2021 CONSTRUCTION REVISIONThis plan for kitchen andback-of-house only. Referto designer plans for
seating layout.
PA2020-356 Attachment No. PC 5 - Project Plans
53
PA2020-356 Attachment No. PC 5 - Project Plans
56