Loading...
HomeMy WebLinkAboutF2022-0187 - Misc2621 - 007 �-O-vO 13tnG�t S7 CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE 0 LISTING No. i?125078'5 o1r8 Page 1 of 1 CATEGORY: 7125 -- FIRE ALARM DEVICES FOR THE HEARING IMPAIRED LISTEE: Cooper Wheelock Inc.7246 16th St. E., Ste. 105, Sarasota, FL 34243 Contact: Thomas Conover (941) 487-2336 Email: thomaslconover@eaton.com DESIGN: Exceder Series: Models ­1 strobe }iS hornastrotie and HN horn. Model ST is a synchronous and non -synchronous strobe light. Model HS a visual/audible appliance and Model HN is an audible signal appliance. All units followed by R (red) or W (white). Additionally, a'C' may be added for ceiling models and/or a'-NR' may be added for non-resettable models. For non -NR models and optional'S'for silver fascia may be added*. Refer to listee's data sheet for additional detailed product description and operational considerations. RATING: Electrical: 12 VDC/24VDC/FWR Candela (wall)*: 15, 15/75, 30, 75, 95, 110, 135 & 185 Candela (ceiling)*: 15, 30, 60, 75, 95, 115, 150, & 177 INSTALLATION: In accordance with listee's printed installation instructions, applicable codes and ordinances and in a manner acceptable to the authority having jurisdiction. All models are for indoor use and for wall mount only or ceiling mount only* MARKING: Listee's name, model number, electrical/candela rating, and UL label. APPROVAL: Listed as horn for fire alarm signaling and strobe, horn/strobe for the hearing impaired when used with separately listed electrically compatible fire alarm control units. Refer to listee's Installation Instructions Manual for details. *Rev. 9-24-09 fm This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed sgE the test results and/or other data but does not make an independent verification of any claims. This listing is not `�' an endorsement or recommendation of the item listed. This listing should not be used to verify correct 10 operational requirements or installation criteria. Refer to listee's data sheet, installation instructions and/or other Date Issued: July 01, 2021 Authorized By: DAVID CASTILLO„ M.E., F.P.E. Fire Engineering Division nd Horn Notification Appliances Description: The Wheelock® Exceder^^ Series of notification appliances feature a sleek modern design that will please building owners with reduced total cost of ownership. Installers will benefit from its comprehensive feature list, including the most candela options in one appliance, low current draw, no tools needed for setting changes, voltage test points, 12/24 VDC operation, universal mounting base and multiple mounting options for both new and retrofit construction. The Wheelock® Excederrm Series incorporates high reliability and high efficiency optics to minimize current draw allowing for a greater number of appliances on the notification appliance circuit. All strobe models feature an industry first of 8 candela settings on a single appliance. Models with an audible feature 3 sound settings (90, 95, 99 dB). All switches to change settings, can be set without the use of tool and are located behind the appliance to prevent tampering. Wall models feature voltage test points to take readings with a voltage meter for troubleshooting and AHJ inspection. The Wheelock® Exceder"" Series of wall and ceiling notification appliances feature a Universal Mounting Base (UMB) designed to simplify the installation and testing of horns, strobes, and combination horn strobes. The separate universal mounting base can be pre -wired to allow full testing of circuit wiring before the appliance is installed and the surface is finished. It comes completewith a Contact Cover for protection againstdirt, dust, paint and damage to the contacts. The Contact Cover also acts as a shunting device to allow pre -wire testing forcommon wiring issues. The Contact Cover is polarized to prevent it from being installed incorrectly and prevents the appliance from being installed while it is on the UMB. When the Contact Cover is removed the circuit will show an open until the appliance is installed. The UMB allows for consistent installation and easy replacement of appliances if required. Wall models provide an optional locking screw for extra secure installation, while the ceiling models provide a captivated screw to prevent the screw from falling during installation. COOPER Notification - Save up to 48% in current draw* - Up to 9 models now in 1 appliance - Save up to 14% cost of installation** [(O>] Sleek Modern Aesthetics Finger Slide Switches Voltage Test Points Multiple Voltages CO3 Audible Settings 90, 95, 99 d8 8 Candela Settings Wall - 15/1575/30/75/95/110/135/185 5/1 Ceiling - 15/30160/75/95/115/150/177 Universal Mounting Base `#* V Ceiling and Wall Mounts to 5 Backbox Types Environmentally Friendly Low Current Draw Compatibility and Requirements ' -Synchronize using the Wheelock° Sync Modules or panels with built-in Wheelock' Patented Sync Protocol CompatiblewithUL"Regulated Voltage" using filtered VDC or unfiltered VRMS input voltage -Strobes produce 1 Flash per second over the"Regulated Voltage' range -Compared to competitive models *** Patented ** Compared to previous models NOTE: All CAUTIONS and. WARNINGS are identified by the A'WARNING: PLEASE READ THESE SPECIFICATIONS AND AS: OR APPLYING THIS PRODUCT. VISIT: WWW.000PERNOTIFICATIO INSTRUCTIONS. FAILURE TO COMPLY WITH ANY OFTHESE INST I A. All -0 in bold capital letters. i CAREFULLY BEFORE USING, SPECIFYING TION FOR THE CURRENT INSTALLATION INSTALLATION AND/OR OPERATION OF THESE PRODUCTS IN AN EMERGENCY SITUATION, WHICH COULD RESULT IN PROPERTY DAMAGE, AND SERIOUS INJURY OR DEATH TO YOU AND/OR OTHERS. General Notes: General Notes: • Strobes are designed to flash at 1 gash persecond`minimum overtheir "Regulated Voltage Range". " • All candela ratings represent minimum effective strobe intensity based an UL Standard 1971 • Series'Exceder Strobe products are Listed. under UL Standards 1971 and 464 for indoor use with a temperature range of 32Fto 120°F (0°C to 49°C) and maximum humidity of 93% (t 2%) UL 464 (85 % ILL 1971). _ • Series Exceder horns are under UL Standard 464 for audible signal appliances (Indoor use only). Low Strobe Ratings per UL Standard 1971 Current Draw = Fewer Power Supplies UL Max Current' 24VDC/24FWR 12VDC Model Regulated Voltage Range VDC 15 LO'O/7 30 60 75 95 110 115 135 750 177 185 15 15/75 ST 8.0-33.0 0.057 0.085 0.135 0.163 0.182 0.205 0.253 0.110 0.140 Elm 8.0-33.0 0.061 0.085 0.103 0.135 0.163 0.182 0.205 0.253 0.110 Horn Strobe Ratings per UL 1971 &Anechoic at 24VDC UL Max Current* at Anechoic 99 dBA 24 VDC 12 VDC Regulated Voltage Model 15 15/75 30 60 75 95 110 115 135 150 177 185 15 15/75 Range VDC HS 8.0-33.0 0.082 1 0.095 1 0.102 MI 0.148 0.176 0.197 0.242 0.282 0.125 0.159 } K 8.0-33.0 TOM 0.102 0.141 0.148 0.176 0.197 0.242 0.282 0.125 UL Max Current* at Anechoic 95 .: 24VDC 12 VDC Model Regulated Voltage 15 15/75a306O75 95 110111351118515 15/75 RangeVDCHS 8.0-33.0 0.073 0.083 .139 0.163 0.186 0.2300.272 0.122 0.153HSC 8.0-33.0 0.073 .139 0.163 0.186 0.230 0.272 0.122 24VDC 12VDC Regulated Voltage Model 15 15/75 30 60 75 95 110 115 135 150 177 185 15 15/75 Range VDC HS 8.0-33.0 0.065 0.075 0.084 0,136 0.157 0.184 0.226 0.267 0.120 0,148 HSC 8.0-33.0 0.065 0.084 0.120 0.136 0.157 0.184 0.226 0.267 0.120 Horn Ratings per ULAnechoic Model Regulated Voltage 99dB 95dB 90dB Range VDC F - HN 16-33.0 0.064 0.044 0.022 HNC 16-33.0 0.084 0.044 0.022 HN 8.0-17.5 0.047 0.026 0.017 HNC 8.0-17.5 0.047 0.026 0.017 UL max current rating is the maximum RMS current within the listed voltage range (16 33 VDC. for 24 VDC units) For strobes the UL max current is usually at the minimum listed voltage (16 VDC for 24 VDC units). For audibles the max current is usually at the maximum listed voltage (33 VDC for 24 VDC units) For unfiltered ratings, see installation instructions. Specification & Ordering Information Sync wl Model Strobe DSM or 12124 VDC* Mounting Candela Wheelock Power Options Supplies HSR 1511575/301751951110/135/185 X X UMB** HSW 15/1575/30175195/1101135/185 X X UMB** HSRC 15/30160/75/95/115/1501177 X X UMB** HSWC 15/30/60175/95/115/150177 X X UMB** • ' STIR 15/1575/30/75/95/110/135/185 X X UMB'* STW 15/1575/30/75/951110/1351185 X X UMB** • RC 15/30/60/75/95111511501177 X X UMB** ' STWC • 15/30/60175/95/115/150/177 X X UMB** UMB** HNR X X HNW X X UMB** HNRC ,. X X UMB** HNWC X X UMB** NOTE: Due to continuous development of our products, specifications and offerings are subject to change without notice in accordance with Cooper Wheelock Inc., dba Cooper Notification standard terms and conditions. Architects and Engineers Specifications The notification appliances shall be Wheelock' Exceder- Series HS Audible Strobe appliances, Series ST Visual Strobe appliances and Series HN Audible appliances or approved equals. The Series HS and ST Strobes shall be listed for UL Standard 1971 (Emergency Devices for the Hearing -Impaired) for Indoor Fire Protection Service. The Series HS and HNAudibles shall be UL Listed under Standard 464 (Fire Protective Signaling). All Series shall meet the requirements of FCC Part 15 Class B. All inputs shall be compatible with standard reverse polarity supervision of circuit wiring by a Fire Alarm Control Panel (FACP) with the ability to operate from 8 to 33 VDC. Indoor wall models shall incorporate voltage test points for easy voltage inspection. The Series HS Audible Strobe and ST Strobe appliances shall produce a flash rate of one (1) flash per second over the Regulated Voltage Range and shall incorporate a Xenon flashtube enclosed in a rugged Lexan® lens. The Series shall be of low current design. Where Multi -Candela appliances are specified, the strobe intensity shall have 8 field selectable settings at 15, 15/75, 30, 75, 95, 110, 135, 185 candela for wall mount and 15, 30, 60, 75, 95, 115, 150, 177 candela for ceiling mount. The selector switch for selecting the candela shall be tamper resistant. The 15175 candela strobe shall be specified when 15 candela UL Standard 1971 Listing with 75 candela on -axis is required (e.g. ADA compliance). Appliances with candela settings shall show the candela selection in a visible location at all times when installed. The audible shall have a minimum of three (3) field selectable settings for dBA levels and shall have a choice of continuous or temporal (Code 3) audible outputs. The Series HS Audible Strobe, ST Strobe and Series HN Audible shall incorporate a patented Universal Mounting Base that shall allow mounting to a single -gang, double -gang, 4-inch square, 3.5-inch octal, 4-inch octal or 100mm European type back boxes. Two wire appliance wiring shall be capable of directly connecting to the mounting base. Continuity checking of the entire NAC circuit prior to attaching any notification appliances shall be allowed. Product shall come with Contact Cover to protect contact springs. Removal of an appliance shall result in a supervision fault condition by the Fire Alarm Control Panel (FACP). The mounting base shall be the same base among all horn, strobe, horn strobe, wall and ceiling models. All notification appliances shall be backwards compatible. The Series HS and ST wall models shall have a low profile measuring 5.24" H x 4.58" W x 2.19" D. Series HN wall shall measure 5.24" H x 4.58" W x 1.6" D. The Series HSC and STC shall been round and have a low profile with a diameter of 6.68" x 2.63" D. Series HNC ceiling shall have a diameter of 6.68" x 1.50" D. When synchronization is required, the appliance shall be compatible with Wheelock®'s DSM Sync Modules, Wheelock® Power Supplies or other manufacturer's panels with built-in Wheelock° Patented Sync Protocol. The strobes shall not drift out of synchronization at any time during operation. If the sync protocol fails to operate, the strobe shall revert to a non -synchronized flash -rate and still maintain (1) flash per second over its Regulated Voltage Range. The appliance shall also be designed so that the audible signal may be silenced while maintaining strobe activation when used with Wheelock® synchronization protocol. Wall Appliances — UL Standard 1971, UL Standard 464, California State Fire Marshal (CSFM), ULC, FM Ceiling Appliances — UL Standard 1971, UL Standard 464, California State Fire Marshal (CSFM), ULC, FM 1_ Me.b WE ENCOURAGE AND SUPPORT NICET CERTIFICATION 3 YEAR WARRANTY Exceder - Spec Sheet 6/11 Wheelock° M®C SAFEPATW CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE 0 LISTING No. 712520785�0152 Page 1 of 1 CATEGORY: 7125-- FIRE ALARM DEVICES FOR THE HEARING IMPAIRED LISTEE: Cooper yalheeloa)Ss nc.7246 16th St. E., Ste. 105, Sarasota, FL 34243 Contact: Thomas Conover (941) 487-2336 Email: thomaslconover@eaton.com DESIGN: Models *ET70-241575W, ET70-24MCW, ET70-24MCC, ET70-24MCWH, ET70-24MCCH, *ET80-241575W, ET80-24MCW, ET80-24MCWH, *ET90-241575W, ET90-24MCW, ET90-24MCC, ET90-24MCWH, ET90-24MCCH, E70-24MCW, E70-24MCC, E70-24MCWH, E70-24MCCH, E90-24MCW E90`=24MCC�E90-24MCWH, and E90-24MCCH multi -candela speaker/strobes. Models E60-R, E60-W, E60-24MCC-FW, E60-24MCCH-FR, E60-24MCCH-FW, E60EXT-R and E60-EXT-W multi -candela speaker/strobes. May be followed by suffixes to designate lens lettering and plate color. *Lens color may be Clear, Red (R), Blue (B), Green (G), or Amber (A). EXT is an extender ring that mounts behind the speaker. Intended for indoor use only. Refer to listee's data sheet for additional detailed product description and operational considerations. RATING: Electrical: 16-33 VDC, 25/70 VRMS _ Flash rate: 60 Flashes/min Candela: MCW=15cd,30cd,75cd or 110cd MCC=15cd,30cd,75cd or 95cd MCWH = 135cd,185cd MCCH = 115cd,177cd *1575 = 15 cd/75cd on axis INSTALLATION: In accordance with listee's printed installation instructions, applicable codes and ordinances, and in a manner acceptable to the authority having jurisdiction. Models followed by W or WH are wall mounts; C or CH are ceiling mounts. All models are for indoor use. MARKING: Listee's name, model number, electrical and candela rating, and UL label. APPROVAL: Listed as strobe speakers suitable for the hearing impaired when used in conjunction with separately listed electrically compatible fire alarm control units. For synchronization strobes, Models SM-12/24 or DSM-12/24 synchronized control modules (CSFM Listing No. 7300-0785:132) must be used. Refer to manufacturer's Installation Manual for details. NOTE: These units do not generate a temporal pattern signal. If the distinctive three -pulse Temporal Pattern Fire Alarm Evacuation signal (for total evacuation) in accordance with NFPA 72, 2002 Edition is required, the appliance must be used with a fire alarm control unit that can generate the temporal pattern signal. *Rev. 07-30-10 fm This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not -s° an endorsement or recommendation of the item listed. This listing should not be used to verify correct 10 operational requirements or installation criteria. Refer to listee's data sheet, installation instructions and/or other Date Issued: July 01, 2021 Authorized By: DAVID CASTILLO„ M.E., F.P.E. Fire Engineering Division Z1 z1= u k A q` "';4r_ .,_ Description The Wheelock E70 Wall and E90 Ceiling Speakers and Speaker Strobes are designed for high efficiency sound output for indoor :: -- applications. The E product line features intelligible communications y .. with crisp, clear voice messages and tone signaling, ideal for mass notification, and voice evacuation. Providing a sleek aesthetic appearance, the Wheelock Series E High Speaker Strobes feature dual voltage (25/70 VRMS) capability - -. and field selectable taps from 1/8 to 2 watts. The low profile design incorporates a speaker mounting plate for faster and easier Installation. Each model has a built-in level adjustment feature and an aesthetic two (2) screw grille cover. For visible signaling to meet the hearing impaired, the E Speaker Strobe models incorporate the Low Current draw RSS Strobes. Strobe options for wall mount models include 1575 or Wheelock patented MCW multi -candela strobe with field selectable candela settings of 15/30/75/110cd or the high intensity MCWH strobe with ••••�••• � field selectable 135/185cd. ;� Ceiling mount models are available in Wheelock patented MCC multi -candela ceiling strobe with field selectable intensities of 15/30/75/95cd or the high intensity MCCH strobe with field selectable 115/177cd. The strobe portion of all E Speaker Strobes may be synchronized when used in conjunction with the Wheelock DSM Sync Modules, ., Wheelock Power Supplies or other manufacturers panels incorporating the Wheelock Patented Sync Protocol. Wheelock synchronized strobes offer an easy way to comply with ADA recommendations concerning photosensitive epilepsy F 1. E The E Speaker Strobes are UL Listed for indoor use under Standard _ 1971 (Signaling Devices for the Hearing -Impaired) and Standard 1480 (Speaker Appliances). All inputs employ IN/OUT wiring terminals for fast installation using #12 to #18 AWG wiring. Color options for the E Speakers and Speaker Strobes are red and white. FAXON Powering Business Worldwide Technical Data TD450024EN Effective April 2018 Features • Intelligible Communications • Efficient design for high intelligibility at minimum wattage across a frequency range of 400 to 4000 HZ • Field Selectable Settings • Wall mount models are available with Field Selectable Candela Settings of 15/30/75/110cd or 135/185cd (Multi -Candela models) • Ceiling mount models are available with field selectable candela settings of 15/30/75/95cd or 115/177cd (Multi -candela models) • Field Selectable Taps • 1/8 watt up to 2 watts • 25 or 70 VRMS operation • Easy -to -Install • Low profile design incorporates speaker mounting plate for faster and easier installation • Built- in level adjustment feature and an aesthetic two (2) screw grille cover. • Quick installation with IN/OUT screw terminals using #12 to #18 AWG wires • 4" square backbox prevents wire damage • E70 No extension ring required • E90 Optional extender (E90 Ext) is available for mounting to 4" square backboxes • Strobe Synchronization Components • Meet synchronizing standards with Wheelock's DSM Sync Modules, Power Supplies or SAFEPATH products • Compliance • UL 1971, UL 1480 • California State Fire Marshal (CSFM) • ADA/NFPA/ANSI/OSHA • FCC Part 15, ICES Note: Please read these specifications and associated installation instruc- tions, before using, specifying, or installing this product. Visit Eaton.com/ mass notification for current installation instructions. Wheelock E70 & E90 Speakers & Speaker Strobes Drawings Oo 00000000 p z, —z..e 0 ° %�� oe ovo° oe o ° a c... vas°oe° 00800$0 0 Figure 1. E701top) and E90 (bottom) Speakers - Front & Side Views I'�I Figure 2. E70 (top) and E90 (bottom) Speaker Strobes - Front & Side Views General Notes • Strobes are designed to flash at 1 flash per second minimum over their "Regulated Voltage Range" Note that NFPA-72 specifies a flash rate of 1 to 2 flashes per second and ADA Guidelines specify a flash rate of 1 to 3 flashes per second. • All candela ratings represent minimum effective Strobe intensity based on UL 1971. 2 EATON...eatnnx.rn Wheelock E70 & E90 Speakers & Speaker Strobes Table 1. Maximum RIMS Current Technical Data TD450024EN Effective April 2018 UL Max Current (D 24MCW/24MCC 24MCWH/24MCCH Regulated Voltage Model Range VOC 15 30 75 95 110 115 135 177 185 E70 16.0-33.0 0.060 0.092 0.165 0.220 0.300 0.420 -90 16.0-33.0 0.065 0.105 0.189 0.249 0.300 0.420 Table 2. UL Listed Models and Ratings UL Reverberant dBA at 10 Feet 9 1/8 watts Model (D 114 watts 112 watts 1 watts 2 watts E70 Speaker 72 75 78 81 83 E90 Speaker 72 75 78 81 B2 E70 Speaker Strobe 71 75 78 81 83 E90 Speaker Strobe 74 77 80 82 85 Table 3. Specification & Ordering Information Model Order# Strobe Candid. Red White Lettering Wall C Speakers E70-R 9865 X No Lettering X E70-W 9866 X No Lettering X E90-R 9875 X No Lettering X E90-W 9876 X No Lettering X P, Q P, Q P,Q P, (I Syync w/ DSM or Wheeloclr Power Speaker Strobes E70-24MGW-FR 0183 15/30175/110 X FIRE X P, Q X E70-24MCW-FW 0184 15130R51110 X FIRE X P,Q X E70-24MCW-NW 9748 15/30/75/110 X No Lettering X P, Q X E70-24MCW-ALR 4123 15/30/75/110 X ALERT X P,Q X E70-24MCW-ALW 4124 15/30/75/110 X ALERT X P,Q X E70-24MCWH-FR 0185 135/165 X FIRE X P, Q X E70-24MCWH-FW 0186 135/185 X FIRE X P, Q X E70-24MCWH-ALW 4456 135/185 X ALERT X P, Q X E70-24MCC-ALR 4308 15/30/75195 X ALERT X P, (IX E70-24MCC-ALW 583E 15/30/75195 X ALERT X P, [IX E70-24MCC-NW 1000 15/30/75/95 X No Lettering X P, Q X E90-24MCC-FR 0191 15/30/75/95 X FIRE X P, Q X E90-24MCC-FW 0192 15/30175/95 X FIRE X P, Q X E90-24MCC-NW 3181 15/30175/95 X No Lettering X P,a X E90-24MCC-ALW 41 B9 15/30/75/95 X ALERT X P,a X E90-24MCC-ALR 4309 15/30/75/95 X ALERT X E,, Q X E90-24MCCH-FR 0194 115/177 X FIRE X P, Q X E90-24MCCH-FW 0193 115/177 X FIRE X P, Q X E90-24MCCH-ALR 0980 115/177 X ALERT X P, Q X E90-24MCCH-ALW 2975 115/177 X ALERT X P, Q X E90-24MCCH-NW 2974 115/177 X No Lettering X P, C. X i1) EMS current ratings are per UL maximum RMS method. UL max current rating is the maximum RMS current within the listed voltage range (16-33v for 24v units). For strobes the UL max current is usually at the minimum listed voltage (t6v for 24v units). For audibles the max current is usually at the maximum listed voltage (33v for 24v units). For unfiltered FWR ratings, see installation instructions. b dBA ratings are based on testing under UL Standard 1480, c 1/8 watt tap is for private mode only. Note: Due to continuous development of our products, specifications and offerings are subject to change without notice in accordance with Cooper Wheelock Inc., dine Eaton standard terms and conditions. EATON mvveaton.com 3 Technical Data TD450024EN Effective April 2018 Table 4. Specifications Wheelock E70 & E90 Speakers & Speaker Strobes Physical Material Red or white textured UV stabilized, colored impregnated engineered plastic. Exceeds 94V-0 ULfIaminability rating. Weight E70 Speaker: 1.7lbs (0.77 kg); E70 Speaker Strobe 1.8 lbs (0.82kg); E90 Speaker: 1.5lbs (0.68 kg); E90 Speaker Strobe 1.6 Ibs (0.73 ke) Lens GE Lexan 943A Dimensions E70 Speaker: 5.13" W x 5.13" H x 0.43"D; E70 Speaker Strobe: 5.13" W x 5.13" H x 2.56"D; E90 Speaker: 7.27" Diameter x 0.43" D: E90 Speaker Strobe: 7.327 Diameter x2.68" D Rneratinn Temneramre Indoor: 33.8°F to 120.2"F (0°C to 49"C) and maximum humidity of 93% Mounting & Wire Connections Mounting (indoor only) 4"square backbox with extension ring prevents wire damage; Sea for surface mount of E70 Wire Connections #12 through#18 AWG Power & General Operating voltage 25/70 VRMS Strobe Output Rating UL 1971 Strobe Flash Rate Strobes are designed to flash at 1 flash per second Synchronization Models Strobes can be synchronized with Wheelock's DSM Sync Modules, Power Supplies or SAFEPATH products, using Wheelock patented sync protocol Franuencv Range 400 Hz to 40DO Hz Architects and Engineers Specifications The speaker appliances shall be Wheelock Series E70 or E90 Speakers and Speaker Strobe appliances or approved equals. The speakers shall be UL Listed under UL 1480 for Fire Protective Service and speakers equipped with strobes shall be listed under UL 1971 for Emergency Devices for the Hearing -Impaired. In addition, the strobes shall be certified to meet the requirements of FCC Part 15, Class A. All speakers shall be designed for a field selectable input of either 25 or 70 VRMS, with selectable power taps from 1/8 watt to 2 watts. All models shall have listed sound output of up to 87 dB at 10 feet and a listed frequency response of 400 to 4000 Hz. The speaker shall also incorporate a sealed back construction. All inputs shall employ terminals that accept #12 to #18 AWG wire sizes. The strobe portion of the appliance shall produce a flash rate of one (1) flash per second over the Regulated Voltage Range. The strobe shall be of low current design. Where Multi -Candela Speaker Strobes are specified, the strobe intensity shall have field selectable settings and shall be rated per UL 1971 at 15/30/75/110cd or 135/185cd for wall mount and 15/30/75/95cd or 115/177cd for ceiling mount. The selector switch for selecting the candela shall be tamper resistant. WE ENCOURAGE AND SUPPORT NICET CERTIFICATION 3 YEAR WARRANTY Eaton 1000 Eaton Boulevard Cleveland, CH 44122 United States Eatoncom Eaton Life safety & mass notification solutions 273 Branchport Ave. Long Branch, NJ 07740 www.eaton.com/massnnuficahon O 2018 Eaton E N All Rights Reserved SA �T• Pulbl cation No TD450024EN Powering Business Worldwide April 2018 When synchronization is required, the strobe portion of the appliance shall be compatible with Wheelock DSM sync modules, Wheelock Power Supplies or other manufacturers panels incorporating the Wheelock Patented Sync Protocol. The strobes shall not drift out of synchronization at any time during operation. If the sync module or Power Supply fails to operate, (i.e., contacts remain closed), the strobe shall revert to a non -synchronized flash rate. The speaker and speaker strobe appliances shall be designed for indoor surface or flush mounting. The speaker and speaker strobe shall incorporate a speaker mounting plate with a grille cover which is secured with two screws for a level, aesthetic finish and shall mount to standard electrical hardware requiring no additional trimplate or adapter. The finish of the Series E speakers and strobe speakers shall be red or white. All speaker and speaker strobe appliances shall be backward compatible. UL 1971, UL 1480, CSFM, FCC. Eaton Is a registered trademark. All other trademarks are property of their respective owners. CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL - FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE ``�` LISTING No. (712�p'f$b 0,�6@ Page 1 of 1 CATEGORY: 7125-- FIRE ALARM DEVICES FOR THE HEARING IMPAIRED LISTEE: Cooper Wheelock Inc.7246 16th St. E., Ste. 105, Sarasota, FL 34243 Contact: Thomas Conover (941) 487-2336 Email: thomaslconover@eaton.com DESIGN: Exceder Series: Models ST strobe HS hortt_strd*and HN horn. Model ST is a synchronous and non -synchronous strobe light. Model HS a visual/audible appliance and Model HN is an audible signal appliance. All units followed by R (red) or W (white). Additionally, a'C' may be added for ceiling models and/or a'-NR' may be added for non-resettable models. For non -NR models and optional'S' for silver fascia may be added*. Refer to listee's data sheet for additional detailed product description and operational considerations. RATING: Electrical: 12 VDC/24VDC/FWR Candela (wall)*: 15, 15/75, 30, 75, 95, 110, 135 & 185 Candela (ceiling)*: 15, 30, 60, 75, 95, 115, 150, & 177 INSTALLATION: In accordance with listee's printed installation instructions, applicable codes and ordinances and in a manner acceptable to the authority having jurisdiction. All models are for indoor use and for wall mount only or ceiling mount only* MARKING: Listee's name, model number, electrical/candela rating, and UL label. APPROVAL: Listed as horn for fire alarm signaling and strobe, horn/strobe for the hearing impaired when used with separately listed electrically compatible fire alarm control units. Refer to listee's Installation Instructions Manual for details. *Rev. 9-24-09 fm This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed TI the test results and/or other data but does not make an independent verification of any claims. This listing is not '.:� an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee's data sheet, installation instructions and/or other Date Issued: July 01, 2021 Authorized By: DAVID CASTILLO„ M.E., F.P.E. Fire Engineering Division E® M On .: 1orn tGoE' and Horn EJ?VONotification Appliances Description: The Wheelock® Excedeff Series of notification appliances feature a sleek modern design thatwill please building owners with reduced total cost of ownership. Installers will benefit from its comprehensive feature list, including the most candela options in one appliance, low current draw, no tools needed for setting changes, voltage test points, 12/24 VDC operation, universal mounting base and multiple mounting options for both new and retrofit construction. The Wheelocks ExcederT1" Series incorporates high reliability and high efficiency optics to minimize current draw allowing for a greater number of appliances on the notification appliance circuit. All strobe models feature an industry first of 8 candela settings on a single appliance. Models with an audible feature 3 sound settings (90, 95, 99 dB). All switches to change settings, can be set without the use of a tool and are located behind the appliance to prevent tampering. Wall models feature voltage test points to take readings with a voltage meter for troubleshooting and AHJ inspection. The Wheelock® ExcederTm Series of wall and ceiling notification appliances feature a Universal Mounting Base (UMB) designed to simplify the installation and testing of horns, strobes, and combination horn strobes. The separate universal mounting base can be pre -wired to allow full testing of circuit wiring before the appliance is installed and the surface is finished. It comes complete with a Contact Cover for protection against dirt, dust, paint and damage to the contacts. The Contact Cover also acts as a shunting device to allow pre -wire testing for common wiring issues. The Contact Cover is polarized to prevent it from being installed incorrectly and prevents the appliance from being installed while it is on the UMB. When the Contact Cover is removed the circuit will show an open until the appliance is installed. The UMB allows for consistent installation and easy replacement of appliances if required. Wall models provide an optional locking screw for extra secure installation, while the ceiling models provide a captivated screw to prevent the screw from falling during installation. Notification - Save up to 48% in current draw* - Up to 9 models now in 1 appliance - Save up to 14% cost of installation** KO>] Sleek Modern Aesthetics WFinger Slide Switches QjVoltage Test Points Multiple Voltages 3 Audible Settings 90, 95, 99 dB 8 Candela Settings *** Wall- 1511575/30/75/95/110/135/185 Ceiling - 15130/60/75/951115/150/177 ' Universal Mounting Base *** CO) Ceiling and Wall Mounts to 5 Backboz Types Environmentally Friendly Low Current Draw Compatibility and Requirements '-SynchronizeusingtheWheelockSync.Modulesorpanelswithbuilt-in Wheelock* Patented Sync Protocol Compatible with UL'Regulated Voltage" using filtered VDC or unfiltered 'VRMS.input voltage - Strobes produce 1 flash per second over the"Regulated Voltage'range * Compared to competitive models ***Patented ** Compared to previous models NOTE: All CAUTIONS and WARNINGS are identified by the symbol A. All warnings are printed in bold capital letters. General Notes: General Notes: • Strobes are designed to flash at 1 flashper second minimum over their "Regulated Voltage Range". • All candela ratings represent minimum effective strobe intensity based on UL Standard 1971. • Sense Exceder:Strobe products are Listed under UL Standards 1971 and 464 for indoor use with a temperature range of 32T to 1207 (0"C to 49°C) and maximum humidity of 93%(t 2%) UL 464 (85% ILL 1971): • series txceaer norm are anaer UL bMnoam 4b4?or aaolalesignal appliances (I no oar use only). Low Current Draw Strobe Ratings per UL Standard 1971 = Fewer Power Supplies UL Max Current� 24VDC/24FWR 12VDC Model Regulated Voltage Range VDC 15 15/75 30 60 75 95L0182 115 135 150 177 185 15 15/75 ST 8.0-33.0 0.057 0.070 0.085 0.135 0.163 0.205 0.253 0.110 0.140 SIT 8.0-33.0 0.061 0.085 0.103 0.135 0.163 0.182 0.205 0.253 0.110 Horn Strobe Ratings per UL 1971 & Anechoic at 24 VDC UL Max Current* at 24VDC Anechoic 99 dBA 12 VDC Model Regulated Voltage Range VDC 15 15/75 30 60 75 95 110 115 135 150 177 185 15 15/75 HS 8.0-33.0 0,082 0.095 0.102 0.148 0.176 0.197 0.242 0.282 0.125 0.159 KS-08.0-33.0 0.082 0.102 0.141 0.148 0.176 24VDC 0.197 0.242 0.282 0.125 12VDC Model Regulated Voltage Range VDC 15 30 60 75 95 110 115 135 150 177 185 15 15/75 HS 8.0-33.0 0.073.087 J0.083 0.139 0.163 0.186 0.230 0.272 0.122HSC 8.0-33.0 0.073.087 0.128 0.139 0.163 24VDC 0.186 0.230 0.272 0.122 12 VDC Model Regulated Voltage Range VDC 15 15/75 30 60 75 95 110 115 135 150 177 185 15 15/75 HS 8.0-33.0 0.065 0.075 0.084 0.136 0.157 0.184 0.226 0.267 0.120 0.148 HSC 8.0-33.0 0.065 0.084 0.120 0.136 0,157 0.184 0.226 0.267 0.120 I Iy j 71 Horn Ratings per ULAnechoic Model Regulated Voltage Range VDC 99 dB 95 dB 90 dB HN 16-33.0 0.064 0.044 0.022 HNC 16-33.0 0.084 0.044 0.022 HN 8.0-17.5 0.047 0.026 0.017 HNC 8.0-17.5 0.047 0.026 0.017 * UL max current rating is the maximum RMS current within the listed voltage range (16-33 VDC for 24 VDC units). Forstrobes the UL max current is usually at the minimum listed voltage (16 VDC for 24 VDC units), For audibles the max current is usually at the '.. maximum listed voltage (33 VDC for 24 VDC units). For unfiltered ratings, seeinstallation instructions. Specification & Ordering Information Sync w/ Model Strobe DSM or 12/24 VDC* Mounting Candela Wheelock Power Options Supplies HSR 15/1575130175/95/110/135/185 X X UMB** HSW 1511575/30175/95/110/135/185 X X UMB** HSRC 15130/60175195/11511501177 X X UMB** HSWC 15130160175/95/115/150/177 X X UMB** STR 15/1575/30/75195/110/1,95/185 X X UMB** STW 15/1575130/75195/110/135/185 X X UMB** • STRC 15130/60/75/95/115/150/177 X X UMB** ' STWC • 15/30/60/75/9511151150/177 X X UMB** • HNR ' X X UMB** HNW X X UMB** HNRC „ X X UMB** HNWC X X UMB** NOTE: Due to continuous development of our products, specifications and offerings are subject to change without notice in accordance with Cooper Wheelock Inc., dba Cooper Notification standard terms and conditions. - Architects and Engineers Specifications The notification appliances shall be Wheelock' Exceder- Series HIS Audible Strobe appliances, Series ST Visual Strobe appliances and Series HN Audible appliances or approved equals. The Series HS and ST Strobes shall be listed for UL Standard 1971 (Emergency Devices for the Hearing -Impaired) for Indoor Fire Protection Service. The Series HS and HNAudibles shall be UL Listed under Standard 464 (Fire Protective Signaling). All Series shall meet the requirements of FCC Part 15 Class B. All inputs shall be compatible with standard reverse polarity supervision of circuitwiring by a Fire Alarm Control Panel (FACP) with the ability to operate from 8 to 33 VDC. Indoor wall models shall incorporate voltage test points for easy voltage inspection. The Series HIS Audible Strobe and ST Strobe appliances shall produce a flash rate of one (1) flash per second over the Regulated Voltage Range and shall incorporate a Xenon flashtube enclosed in a rugged Lexan® lens. The Series shall be of low current design. Where Multi -Candela appliances are specified, the strobe intensity shall have 8 field selectable settings at 15, 15/75, 30, 75, 95, 110, 135, 185 candela for wall mount and 15, 30, 60, 75, 95, 115, 150, 177 candela for ceiling mount. The selector switch for selecting the candela shall be tamper resistant. The 15/75 candela strobe shall be specified when 15 candela UL Standard 1971 Listing with 75 candela on -axis is required (e.g. ADA compliance). Appliances with candela settings shall show the candela selection in a visible location at all times when installed. The audible shall have a minimum of three (3) field selectable settings for dBA levels and shall have a choice of continuous or temporal (Code 3) audible outputs. The Series HS Audible Strobe, ST Strobe and Series HN Audible shall incorporate a patented Universal Mounting Base that shall allow mounting to a single -gang, double -gang, 4-inch square, 3.5-inch octal, 4-inch octal or 100mm European type back boxes. Two wire appliance wiring shall be capable of directly connecting to the mounting base. Continuity checking of the entire NAC circuit prior to attaching any notification appliances shall be allowed. Product shall come with Contact Cover to protect contact springs. Removal of an appliance shall result in a supervision fault condition by the Fire Alarm Control Panel (FACP). The mounting base shall be the same base among all horn, strobe, horn strobe, wall and ceiling models. All notification appliances shall be backwards compatible. The Series HS and ST wall models shall have a low profile measuring 5.24" H x 4.58" W x 2.19" D. Series HN wall shall measure 5.24" H x 4.58" W x 1.6" D. The Series HSC and STC shall been round and have a low profile with a diameter of 6.68" x 2.63" D. Series HNC ceiling shall have a diameter of 6.68" x 1.50" D. When synchronization is required, the appliance shall be compatible with Wheelock®'s DSM Sync Modules, Wheelock® Power Supplies or other manufacturer's panels with built-in Wheelock® Patented Sync Protocol. The strobes shall not drift out of synchronization at any time during operation. If the sync protocol fails to operate, the strobe shall revert to a non -synchronized flash -rate and still maintain (1) flash per second over its Regulated Voltage Range. The appliance shall also be designed so that the audible signal may be silenced while maintaining strobe activation when used with Wheelock® synchronization protocol. Wall Appliances — UL Standard 1971, UL Standard 464, California State Fire Marshal (CSFM), ULC, FM Ceiling Appliances — UL Standard 1971, UL Standard 464, California State Fire Marshal (CSFM), ULC, FM WE ENCOURAGE AND SUPPORT NICET CERTIFICATION 3 YEAR WARRANTY Exceder - Spec Sheet 6/11 Wheelock° M®C SAFEPATH' WAVE Notification CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE 0 LISTING No. '7� 125,0785Q152 Page 1 of 1 CATEGORY: 7125-- FIRE ALARM DEVICES FOR THE HEARING IMPAIRED LISTEE: Cooper.Wheeloek nc.7246 16th St. E., Ste. 105, Sarasota, FL 34243 Contact: Thomas Conover (941) 487-2336 Email: thomaslconover@eaton.com DESIGN: Models *ET70-241575W, ET70-24MCW, ET70-24MCC, ET70-24MCWH, ET70-24MCCH, *ET80-241575W, ET80-24MCW, ET80-24MCWH, *ET90-241575W, ET90-24MCW, ET90-24MCC, ET90-24MCWH, ET90-24MCCH, E70-24MCW, E70-24MCC, E70-24MCWH, E70-24MCCH, E90-24MCW R902ZZG.C. E90-24MCWH, and E90-24MCCH multi -candela speaker/strobes. Models E60-R, E60-W, E60-24MCC-FW, E60-24MCCH-FR, E60-24MCCH-FW, E60EXT-R and E60-EXT-W multi -candela speaker/strobes. May be followed by suffixes to designate lens lettering and plate color. *Lens color may be Clear, Red (R), Blue (B), Green (G), or Amber (A). EXT is an extender ring that mounts behind the speaker. Intended for indoor use only. Refer to listee's data sheet for additional detailed product description and operational considerations. RATING: Electrical: 16-33 VDC, 25/70 VRMS Flash rate: 60 flashes/min Candela: MCW=15cd,30cd,75cd or 110cd MCC=15cd,30cd,75cd or 95cd MCWH = 135cd,185cd MCCH = 115cd,177cd *1575 = 15 cd/75cd on axis INSTALLATION: In accordance with listee's printed installation instructions, applicable codes and ordinances, and in a manner acceptable to the authority having jurisdiction. Models followed by W or WH are wall mounts, C or CH are ceiling mounts. All models are for indoor use. MARKING: Listee's name, model number, electrical and candela rating, and UL label. APPROVAL: Listed as strobe speakers suitable for the hearing impaired when used in conjunction with separately listed electrically compatible fire alarm control units. For synchronization strobes, Models SM-12/24 or DSM-12/24 synchronized control modules (CSFM Listing No. 7300-0785:132) must be used. Refer to manufacturer's Installation Manual for details. NOTE: These units do not generate a temporal pattern signal. If the distinctive three -pulse Temporal Pattern Fire Alarm Evacuation signal (for total evacuation) in accordance with NFPA 72, 2002 Edition is required, the appliance must be used with a fire alarm control unit that can generate the temporal pattern signal. `Rev. 07-30-10 fm This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not a1 an endorsement or recommendation of the item listed. This listing should not be used to verify correct " operational requirements or installation criteria. Refer to listee's data sheet, installation instructions and/or other Date Issued: July 01, 2021 (LrstingExpires Authorized By: DAVID CASTILLO„ M.E., F.P.E. Fire Engineering Division CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE 0 LISTING No. E'126,007Q5`0152 Page 1 of 1 CATEGORY: 7125 - ClF7 ALARM'DEVICES'FOR THE NEARING f gIRED� LISTEE: Cooper Wheelock Inc.7246 16th St. E., Ste. 105, Sarasota, FL 34243 Contact: Tom Conover (941) 487-2336 Email: thomas.conover@cooperindustries.com DESIGN: Models *ET70-241575W, ET70-24MCW, ET70-24MCC, ET70-24MCWH, ET70-24MCCH, *ET80-241575W, ET80-24MCW, ET80-24MCWH, *ET90-241575W, ET90-24MCW, ET90-24MCC, ET90-24MCWH, ET90-24MCCH, E70-24MCW, E70-24MCC, E70-24MCWH, E70-24MCCH, E90-24MCW iE90=24MCC �90-24MCWH, and E90-24MCCH multi -candela speaker/strobes. Models E60-R, E60-W, E60-24MCC-FW, E60-24MCCH-FR, E60-24MCCH-FW, E60EXT-R and E60-EXT-W multi -candela speaker/strobes. May be followed by suffixes to designate lens lettering and plate color. *Lens color may be Clear, Red (R), Blue (B), Green (G), or Amber (A). EXT is an extender ring that mounts behind the speaker. Intended for indoor use only. Refer to listee's data sheet for additional detailed product description and operational considerations. RATING: Electrical: 16-33 VDC, 25/70 VRMS Flash rate: 60 flashes/min Candela: MCW=15cd,30cd,75cd or 110cd MCC=15cd,30cd,75cd or 95cd MCWH = 135cd,185cd MCCH = 115cd,177cd *1575 = 15 cd/75cd on axis INSTALLATION: In accordance with listee's printed installation instructions, applicable codes and ordinances, and in a manner acceptable to the authority having jurisdiction. Models followed by W or WH are wall mounts; C or CH are ceiling mounts. All models are for indoor use. MARKING: Listee's name, model number, electrical and candela rating, and UL label. APPROVAL: Listed as strobe speakers suitable for the hearing impaired when used in conjunction with separately listed electrically compatible fire alarm control units. For synchronization strobes, Models SM-12/24 or DSM-12/24 synchronized control modules (CSFM Listing No. 7300-0785:132) must be used. Refer to manufacturer's Installation Manual for details. NOTE: These units do not generate a temporal pattern signal. If the distinctive three -pulse Temporal Pattern Fire Alarm Evacuation signal (for total evacuation) in accordance with NFPA 72, 2002 Edition is required, the appliance must be used with a fire alarm control unit that can generate the temporal pattern signal. *Rev. 07-30-10 fm This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not it an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee's data sheet, installation instructions and/or other Date Issued: July 01, 2020 cLlsting EXpire June 3Q, 2021� Authorized By: DAVID CASTILLO„ M.E., F.P.E. Fire Engineering Division YCc Speakers Description The Wheelock E70Wall and E90 Ceiling Speakers and Speaker Strobes are designed for high efficiency sound output for indoor applications. The E product line features Intelligible communications with crisp, clear voice messages and tone signaling, ideal for mass notification, and voice evacuation. Providing a sleek aesthetic appearance, the Wheelock Series E High Speaker Strobes feature dual voltage (25170 VRMS) capability and field selectable taps from 1/8 to 2 watts. The low profile design incorporates a speaker mounting plate for faster and easier installation. Each model has a built-in level adjustment feature and an aesthetic two (2) screw grille cover. For visible signaling to meet the hearing impaired, the E Speaker Strobe models Incorporate the Low Current draw RSS Strobes. Strobe options for wall mount models Include 1575 or Wheelock patented MCW multi -candela strobe with field selectable candela settings of 15/30/75/110cd or the high intensity MCWH strobe with field selectable 135/185cd. Ceiling mount models are available In Wheelock patented MCC multi -candela ceiling strobe with field selectable Intensities of 15/30/75/95cd or the high intensity MCCH strobe with field selectable 115/177cd. _. - -- The strobe portion of all E Speaker Strobes may be synchronized when used in conjunction with the Wheelock DSM Sync Modules, Wheelock Power Supplies or other manufacturers panels Incorporating the Wheelock Patented Sync Protocol. Wheelock synchronized strobes offer an easy way to comply with ADA _ recommendations concerning photosensitive epilepsy F 'I R E The E Speaker Strobes are UL Listed for indoor use under Standard fi d• - I 1971 (Signaling Devices for the Hearing -Impaired) and Standard 1480 (Speaker Appliances). All Inputs employ IN/OUT wiring terminals for fast installation using #12 to #18 AWG wiring. Color options for the E Speakers and Speaker Strobes are red and white. E:T• N Powering Business Worldwide Technical Data TD450024EN Effective April 2018 Features • Intelligible Communications • Efficient design for high Intelligibility at minimum wattage across a frequency range of 400 to 4000 HZ • Field Selectable Settings Wall mount models are available with Field Selectable Candela Settings of 15/30/75/110cd or 135/185cd (Multi -Candela models) Ceiling mount models are available with field selectable candela settings of 15/30/75/95cd or 115/177cd (Multi -candela models) • Field Selectable Taps • 1/8 watt up to 2 watts • 25 or 70 VRMS operation • Easy -to -Install • Low profile design incorporates speaker mounting plate for faster and easier installation • Built- in level adjustment feature and an aesthetic two (2) screw grille cover. • Quick installation with IN/OUT screw terminals using 412 to #18 AWG wires • 4" square backbox prevents wire damage • E70 No extension ring required • E90 Optional extender (E90 Ext) is available for mounting to 4" square backboxes • Strobe Synchronization Components • Meet synchronizing standards with Wheelock's DSM Sync Modules, Power Supplies or SAFEPATH products • Compliance • UL 1971, UL 1480 • California State Fire Marshal (CSFM) • ADA/NFPA/ANSI/OSHA • FCC Part 15, ICES Note: Please read these specifications and associated installation instruc- tions, before using, specifying, or installing this product. Visit Eaton.com/ massnonfication for current installation instructions. Wheelock E70 & E90 Speakers & Speaker Strobes Drawings Figure 1. E70 (top) and E90 (bottom) Speakers - Front & Side Views 0020000202 10,100,111, Figure 2. E70 (top) and E90 (bottom) Speaker Strobes - Front & Side Views General Notes • Strobes are designed to flash at 1 flash per second minimum over their "Regulated Voltage Range" Note that NFPA-72 specifies a flash rate of 1 to 2 flashes per second and ADA Guidelines specify a flash rate of 1 to 3 flashes per second. • All candela ratings represent minimum effective Strobe Intensity based on UL 1971. EATON www.nt.r.... Wheelock E70 & E90 Speakers & Speaker Strobes Table 1. Maximum RMS Current UL Max Current n 24MCW/24MCC 24MCWH/24MCCH Technical Data TD450024EN Effective April 2018 Regulated Voltage Model Range VOC 15 30 75 95 110 t15 t35 177 185 E70 16.0-33.0 0.060 0.092 0.165 0.220 0.300 0.420 R9. 16.0-33.0 0.065 0.105 0.189 0.249 0.300 0.420 Table 2. UL Listed Models and Ratings UL Reverberant dBA at 10 Feet 0 1/8 watts Model Oa 114 watts 112 wet E90 Speaker 72 75 78 81 82 E70 Speaker Strobe 71 75 78 81 83 E90 Speaker Strobe 74 77 80 82 85 Table 3. Specification & Ordering Information Mounting Sync w/ OSM or Model Order # Strobe Candela Red White Lettering Wall Ceiling Options Wheelock Power Supplies Speakers E70-R 9B65 X No Lettering X P, Cl E70-W 986B X No Lettering X P, Q E90-R 9875 X No Lettering X P, Q E90-W 9876 X No Lettering X P, Q Speaker Strobes E70-24MCW-FR E70-24MCW-FW E70-24MCW-NW E70-24MCW-ALR E70-24MCW-ALW E70-24MCWH-FR E70-24MCWH-FW E70-24MCWH-ALW E70-24MCC-ALR E70-24MCC-ALW E70-24MCC-NW E90-24MCC-FR E90-24MCC-FW E90-24MCC-NW E90-24MCC-ALW E90-24MCC-ALR E90-24MCCH-FR E90-24MCCH-FW E90-24MCCH-ALR E90-24MCCH-ALW E90-24MCCH-NW 0183 0164 9748 4123 4124 0185 018B 4456 4308 5838 1000 0191 0192 3181 4189 4309 0194 0193 0980 2975 2974 X FIRE X P, Q X X FIRE X P, Q X X No Lettering X P, Q X X ALERT X P, Q X X ALERT X P, Q X X FIRE X P, Q X X FIRE X P, Q X X ALERT X P, Q X X ALERT X P, Q X X ALERT X P, Q X X No Lettering X P, Q X X FIRE X P,Q X X FIRE X p,a X X No Lettering X P, Q X X ALERT X P, Q X X ALERT X P, Q X X FIRE X P, Q X X FIRE X P, Q X X ALERT X P, Q X X ALERT X P, ❑ X X No Lettering X P, Q X iD RMS current ratings are per UL maximum RMS method. UL max current rating is the maximum RMS current within the listed voltage range (16-33v for 24v units). For strobes the UL max current is usually at the minimum listed voltage (16v for 24v units). For audibles the max current is usually at the maximum listed voltage (33v for 24v units). For unfiltered FWR ratings, see installation instructions. b dBA ratings are based on testing under UL Standard 1480. c 1/8 watt tap is for private mode only. Note: Due to continuous development of our products, specifications and offerings are subject to change without notice in accordance with Cooper Wheelock Inc., dba Eaton standard terms and conditions. EATON...eatonauur 3 Technical Data TD450024EN Effective April 2016 Table 4. Specifications Wheelock E70 & E90 Speakers & Speaker Strobes Physical Material Red or white textured UV stabilized, colored impregnated engineered plastic. Exceeds 94V-0 UL flammability rating. Weight E70 Speaker: 1.7 Ibs (0.77 kg); E70 Speaker Strobe 1.8Its (0.82kg); E90 Speaker: 1.5 ins (0.68 kgi E90 Speaker Strobe 1.6 Lens GE Lexan 943A Dimensions E70 Speaker: 5.13" W x 5.13" H x 0.43"D; E70 Speaker Strobe: 5.13" W x 5.13" H x 2.56" D; E90 Speaker: 7.27" Diameter x 0.43" D; E90 Speaker Strobe: 7.327 Diameter x 2.68" D Operating Temperature Indoor: 33.8°F to 1207F (0°C to 49°C) and maximum humidity of 93% Mounting & Wire Connections Mounting (indoor only) 4"square backbox with extension ring prevents wire damage; SEE for surface mount of E70 Wire Connections #12through#18 AWG Power & General Operating voltage 25/70 VRMS Strobe Output Rating UL 1971 Strobe Flash Rate Strobes are designed to flash at 1 flash per second Synchronization Models Strobes can be synchronized with Wheelock's DSM Sync Modules, Power Supplies or SAFEPATH products, using Wheelock patented sync protocol Frequency Range 400 Hz to 4000 Hz Architects and Engineers Specifications The speaker appliances shall be Wheelock Series E70 or E90 Speakers and Speaker Strobe appliances or approved equals. The speakers shall be UL Listed under UL 1480 for Fire Protective Service and speakers equipped with strobes shall be listed under UL 1971 for Emergency Devices for the Hearing -Impaired. In addition, the strobes shall be certified to meet the requirements of FCC Part 15, Class A. All speakers shall be designed for a field selectable input of either 25 or 70 VRMS, with selectable power taps from 1/8 watt to 2 watts. All models shall have listed sound output of up to 87 d8 at 10 feet and a listed frequency response of 400 to 4000 Hz. The speaker shall also incorporate a sealed back construction. All inputs shall employ terminals that accept #12 to #18 AWG wire sizes. The strobe portion of the appliance shall produce a flash rate of one (1) flash per second over the Regulated Voltage Range. The strobe shall be of low current design. Where Multi -Candela Speaker Strobes are specified, the strobe intensity shall have field selectable settings and shall be rated per UL 1971 at 15/30/75/1 Iced or 135/185cd for wall mount and 15/30/75/95cd or 115/177cd for ceiling mount. The selector switch for selecting the candela shall be tamper resistant. WE ENCOURAGE AND SUPPORT NICET CERTIFICATION 3 YEAR WARRANTY Eaton 1000 Eaton Boulevard Cleveland, OH 44122 United States Eaton.com Eaton Life safety & mass notification solutions 273 Branchi Ave. Long Branch, NJ 07740 vvvvvveafton.com/maseratification O 2018 Eaton All ights Reserved Pried is USA FAT, N Publiation No. TD450024EN Powering Business Wmlolvide April 201E When synchronization is required, the strobe portion of the appliance shall be compatible with Wheelock DSM sync modules, Wheelock Power Supplies or other manufacturers panels incorporating the Wheelock Patented Sync Protocol. The strobes shall not drift out of synchronization at any time during operation. If the sync module or Power Supply fails to operate, (i.e., contacts remain closed), the strobe shall revert to a non -synchronized flash rate. The speaker and speaker strobe appliances shall be designed for indoor surface or flush mounting. The speaker and speaker strobe shall incorporate a speaker mounting plate with a grille cover which is secured with two screws for a level, aesthetic finish and shall mount to standard electrical hardware requiring no additional trimplate or adapter. The finish of the Series E speakers and strobe speakers shall be red or white. All speaker and speaker strobe appliances shall be backward compatible. UL 1971, UL 1480, CSFM, FCC. Eaton is a registered trademark. All othaltrad.m.to are property of their respective owners.