The URL can be used to link to this page

Home My WebLink AboutX2020-2652 - Misc 33 Appendix E LANDSCAPE INSTALLATION CERTIFICATE OF COMPLETION I hereby certify that: (1) I am a professional appropriately licensed in the State of California to provide professional landscape design services. (2) The landscape project for the property located at (provide street address or parcel number(s)) was installed by me or under my supervision. (3) The landscaping for the identified property has been installed in substantial conformance with the approved Landscape Documentation Package and complies with the requirements of the City of Newport Beach Water Efficient Landscape Ordinance (Municipal Code Section 14.17) and the City of Newport Beach Standards for Implementation of the City of Newport Beach Water Efficient Landscape Ordinance for the efficient use of water in the landscape. (4) The following elements are attached hereto: a. Irrigation scheduling parameters used to set the controller; b. Landscape and irrigation maintenance schedule; c. Irrigation audit report; and d. Soil analysis report, if not submitted with Landscape Documentation Package, and documentation verifying implementation of the soil report recommendations. (5) The site installation complies with the following: a. The required irrigation system has been installed according to approved plans and specifications and if applicable, any prior approved irrigation system alternatives. _____ Yes ____ No b. Sprinklers comply with ASABE/ICC 802-2014 Landscape Irrigation Sprinkler & Emitter Standard. _____ Yes ____ No (6) The information I have provided in this Landscape Installation Certificate of Completion is true and correct and is hereby submitted in compliance with the City of Newport Beach Design Standards for Implementation of the City of Newport Beach Water Efficient Landscape Ordinance. 34 Print Name Date Signature License Number Address Telephone E-mail Address Landscape Design Professional’s Stamp (If Appropriate) CITY OF NEWPORT BEACH Community Development Department | Building Division 100 Civic Center Dr.| P.O. Box 1768 | Newport Beach, CA 92658 www.newportbeachca.gov | (949) 644-3200 OPERATION & MAINTENANCE MANUAL In compliance with the California Green Building Standards Code, this Operation and Maintenance Manual shall be available at final inspection and remain with the building throughout the life-cycle of the structure. This manual has been prepared for the building located at: Address: Permit #: City/State/Zip Check the box and sign below If no new equipment or fixture is installed as part of this project. (No further information is required on the rest of this form.) � I Certify that in the construction of this project, no new equipment or fixture was installed. Name:_________________________________ Relationship to project:______________________ Signature:______________________________ License #:______________ Date:___________ Equipment & Fixture Information (Required for new fixtures and equipment only) Provide the make, model and maintenance information for all newly installed equipment and fixtures. This list shall include, but not be limited to the following items: compressor, air filter, furnace, water heater, kitchen appliances, smoke alarm, landscape irrigation, irrigation control, thermostat, hydrometer, water treatment system, roof and yard drainage, whole house fan, septic system, and similar equipment and fixtures. This information shall be submitted by the contractor at the time of final inspection. Use supplemental information sheet at the end of this form for additional equipment and fixtures. Equipment/Fixture type:______________________________________________________________ Make:_________________________________ Model:________________________________ Maintenance Schedule: � Weekly � Monthly � Semi-Annually � Annually �Other:__________________ Maintenance Instructions:____________________________________________________________ ________________________________________________________________________________ Maintenance specifications/ Catalogue attached: �Yes �No Equipment/Fixture type:______________________________________________________________ Make:_________________________________ Model:________________________________ Maintenance Schedule: � Weekly � Monthly � Semi-Annually � Annually �Other:__________________ Maintenance Instructions:____________________________________________________________ ________________________________________________________________________________ Maintenance specifications/ Catalogue attached: �Yes �No Equipment/Fixture type:______________________________________________________________ Make:_________________________________ Model:________________________________ Maintenance Schedule: � Weekly � Monthly � Semi-Annually � Annually �Other:__________________ Maintenance Instructions:____________________________________________________________ ________________________________________________________________________________ Maintenance specifications/ Catalogue attached: �Yes �No P/N 636282 JanuaryM T W T F S S Permanent Day Off Permanent Day Off Permanent Day Off Permanent Day Off M T W T F S SM T W T F S SM T W T F S S Program A Select Days to Water Set WateringStart Times Seasonal Adjust Monthly Seasonal AdjustValve Delay Valve Description Run Time Run Time Run Time Run TimeCycleTimeSoakTimeSensorOverrideMV/PumpRelay PROGRAMMING CHART for ESP-LX Modular Controllers Program B Program C Program D Monthly Seasonal Adjust February March April___-day cycleeven ❏ on ❏ on ❏ on ❏ on ❏ on ❏ on ❏ on ❏ on ❏ on ❏ on ❏ on ❏ on ❏ on ❏ on ❏ on ❏ on ❏ on ❏ on ❏ on ❏ on ❏ on ❏ on ❏ on ❏ on ❏ on ❏ on ❏ on ❏ on ❏ on ❏ on ❏ on ❏ on ❏ on ❏ on ❏ on ❏ on ❏ on ❏ on ❏ on ❏ on ❏ on ❏ on ❏ on ❏ on ❏ on ❏ on ❏ on ❏ on ❏ on ❏ on ❏ on ❏ on ❏ on ❏ on ❏ on ❏ on ❏ on ❏ on ❏ on ❏ on ❏ on ❏ on ❏ on ❏ on ❏ on odd odd31 odd31 odd31 odd31 am/pm am/pm am/pm am/pm am/pm am/pm am/pm am/pm ___-day cycleevenodd ___-day cycleevenodd ___-day cycleevenodd May June July August September October November December Notes: ❏ on ❏ on ❏ on 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 am/pm am/pm am/pm am/pm am/pm am/pm am/pm am/pm 1 2 3 4 5 6 7 8 am/pm am/pm am/pm am/pm am/pm am/pm am/pm am/pm 1 2 3 4 5 6 7 8 am/pm am/pm am/pm am/pm am/pm am/pm am/pm am/pm 1 2 3 4 5 6 7 8 Rain+Birdt ESP-TM2 Controller User Manual 10220MINUTESHOURSTATION REMAININGRUN TIME Introduction .........................................2 Welcome to Rain Bird .............................................2 Controller Features .................................................2 Installation ...........................................2 Mount Controller .....................................................2 Wiring Connections ................................................3 Connect Valves ...................................................................3 Connect Master Valve (optional) ..................................3 Connect Pump Start Relay (optional) .........................3 Connect Rain/Freeze Sensor (optional) .....................4 Connect Custom Wiring (optional) .............................4 Controls and Indicators ........................5 Special Features ...................................5 Basic Programming ..............................6 1. Set Date and Time ............................................6 2. Set Watering Start Times ................................6 3. Set Station Run Times .....................................6 4. Set Watering Days ............................................6 Custom Days of the Week ...............................................6 Manual Watering Options ....................7 Test All Stations........................................................7 Run a Single Station ...............................................7 Run a Single Program .............................................7 Normal Operation ................................7 AUTO RUN .................................................................7 OFF ..............................................................................7 Advanced Programming ......................8 Odd or Even Calendar Days ..................................8 Cyclic Days ................................................................8 Rain Sensor ...............................................................8 Seasonal Adjust .......................................................8 Delay Watering .........................................................8 Permanent Days Off................................................9 Options ................................................9 Reset Button .............................................................9 Remote Accessories ................................................9 Troubleshooting .................................10 Watering Issues ......................................................10 Electrical Issues ......................................................10 ESP-TM2 Controller2 Introduction Welcome to Rain Bird Thank you for choosing Rain Bird’s ESP-TM2 controller. In this manual are step by step instructions for how to install and operate the ESP-TM2. 10220MINUTESHOURSTATION REMAININGRUN TIME Controller Features Feature Description Maximum Stations 12 Simultaneous Stations 1 plus master valve Start Times 4 Programs 3 Program Cycles Custom Days, Odd, Even and Cyclic Permanent Days Off Per program Master Valve Control On/Off per station Rain Delay Supported Rain/Freeze Sensor Supported Rain Sensor Control Global or by station Seasonal Adjust Global or by program Manual Station Run Yes Manual Program Run Yes Manual Test All Stations Yes Station Advance Yes Short Detect Yes Delay Between Stations Yes Accessory Port Yes (5 pin) Save & Restore Programming Yes Installation Mount Controller A Drive a mounting screw into the wall, leaving an 1/8 inch gap between the screw head and the wall surface (use the supplied wall anchors if necessary), as shown. B Locate the keyhole slot on back of the controller unit and hang it securely on the mounting screw. 1/8 IN.1/8 IN. 1 2 C Remove the wiring bay cover on the lower part of the controller unit, and drive a second screw through the open hole inside the controller and into the wall, as shown. CONNECT 120 VAC RESET ACCESSORY 1234567824VACSENSCM 9101112 3 bbNOTE: Choose a suitable mounting location close to a 120 VAC wall outlet. ESP-TM2 Controller3 Wiring Connections Connect Valves A Route all field wires through the opening at the bottom of the unit, or through the knock-out in back of the unit. Attach conduit if desired, as shown. B Connect one wire from each valve to one of the numbered station terminals (1-12) on the controller, as shown. C Connect a field common wire (C) to the common terminal (C) on the controller. Then connect the remaining wire from each valve to the field common wire, as shown. bbNOTE: The ESP-TM2 controller supports one valve solenoid per station terminal. CONNECT 120 VAC RESET ACCESSORY 1234567824VACSENSCM 9101112 1 2 4 MASTER VALVE C MV 1 2S 3 Connect Master Valve (optional) D Connect a wire from the master valve (M) to the master valve terminal (M) on the controller. Then connect the remaining wire from the master valve to the field common wire, as shown. Connect Pump Start Relay (optional) The ESP-TM2 can control a pump start relay, to turn the pump on and off as needed. A Connect a wire from the pump start relay (PSR) to the master valve terminal (M) on the controller. Then connect another wire from the pump start relay to the field common wire, as shown. B To avoid the possibility of damage to the pump, connect a short jumper wire from any unused terminal(s) to the nearest terminal in use, as shown. CONNECT 120 VAC RESET ACCESSORY 1234567824VACSENSCM 9101112 bbNOTE: Connection to pump and external power not shown. Refer to pump installation instructions.1 PUMP START RELAY 2 C PSR 1 2 bbNOTE: The ESP-TM2 controller DOES NOT provide power for a pump. The relay must be wired according to manufacturer instructions. Only the following Rain Bird pump start relay models are compatible with the ESP-TM2: Description Model # Volts Universal Pump Relay PSR110IC 110V Universal Pump Relay PSR220IC 220V ESP-TM2 Controller4 Connect Rain/Freeze Sensor (optional) The ESP-TM2 controller can be set to obey or ignore a rain sensor. Refer to the Rain Sensor section under Advanced Programming. A Remove the yellow jumper wire from the SENS terminals on the controller. B Connect both rain sensor wires to the SENS terminals, as shown. CONNECT 120 VAC RESET ACCESSORY 1234567824VACSENSCM 9101112 2 bbNOTE: Do not remove the yellow jumper wire unless connecting a rain sensor. bbNOTE: Rain Bird controllers are only compatible with normally closed rain sensors. bbNOTE: For wireless rain/freeze sensors, refer to installation instructions for sensor. bcWARNING: Do not apply power until you have completed and checked all wiring connections. Connect Custom Wiring (optional) If desired, the provided 120 volt power cord can be removed and replaced with a custom wiring. To remove the factory installed power cord and connect custom wiring: A Ensure that AC power is disconnected. B Remove the controller junction box cover and disconnect the power cord to the unit. C Remove the factory installed power cord by loosening the 2 screws securing the metal strain-relief bar, as shown. D Connect the external power supply wires using the wire nuts and then re-secure the metal strain relief bar by tightening the 2 screws. RESET ACCESSORY 1234567824VACSENSCM 9101112 TO EXTERNAL POWER SUPPLY 4 Power Wiring Connections (120VAC) Black supply wire (hot) to the black transformer wire White supply wire (neutral) to the white transformer wire Green supply wire (ground) to the green or green-yellow transformer wire E Verify that all wiring connections are secure and then replace the junction box cover. bdCAUTION: The strain-relief bar must be re-secured for the unit to function properly. bcWARNING: DO NOT apply power until you have completed and checked all wiring connections. ESP-TM2 Controller5 PROGRAM SELECT BUTTON Select Program A, B or C. START TIMES Set up to 4 Start Times per program. RUN TIMES Set Run Times for each program. MANUAL STATION Start watering any or all stations immediately. RUN DAYS Set watering day options for each program. SENSOR Set controller to obey or ignore a rain sensor. SEASONAL ADJUST Adjust Run Times from 5% up to 200%. BACK/NEXT BUTTONS Select programming options. – / + BUTTONS Adjust program settings. OFF Disables automatic irrigation. AUTO RUN Watering occurs automatically. DATE/TIME Set the current Date and Time. Controls and Indicators Turn the dial to select programming features. Special Features blTurn the dial to the desired position. blPress and hold and at the same time. SET INTERSTATION DELAY A station delay (from 1 second to 9 hours) ensures that a valve has completely closed before the next one opens. RESET TO FACTORY DEFAULTS All programmed schedules will be erased. SET RAIN SENSOR BYPASS BY STATION Tells a station to obey or ignore a rain sensor. SAVE PROGRAMMING RESTORE PROGRAMMING SET MASTER VALVE BY STATION Allows a station to be controlled by a master valve or pump start relay. SET TO ODD, EVEN OR CYCLIC WATERING See Advanced Programming. ESP-TM2 Controller6 1 Set Date and Time Turn the dial to DATE/TIME. blPress or to select the setting to change. blPress or to change the setting value. blPress and hold - or + to accelerate adjustments. To change the time format (12 hour or 24 hour): blWith MINUTES blinking, press . blPress or to select the desired time format, then press to return to the time setting. 2 Set Watering Start Times Up to four Start Times are available for each program. Turn the dial to START TIMES. blPress Program Select to choose the desired Program (if necessary). blPress or to select an available Start Time. blPress or to set the selected Start Time (ensure the AM/PM setting is correct). blPress to set additional Start Times. 3 Set Station Run Times Run Times can be set from one minute up to six hours. Turn the dial to RUN TIMES. blPress Program Select to choose the desired Program (if necessary). blPress or to select a Station. blPress or to set the Run Time for the selected Station. blPress to set additional Station Run Times. 4 Set Watering Days Custom Days of the Week Set watering to occur on specific days of the week. Turn the dial to RUN DAYS. blPress Program Select to choose the desired Program (if necessary). blPress or to set the selected (blinking) day as either ON or OFF, and to automatically move to the next day. blYou can press or at any time to move the cursor to the previous or next day. bdCAUTION: If Sunday is selected, will enter and activate Cyclic Watering (see the Advanced Programming section). If this is not desired, press the button to return to watering by Custom Days. Basic Programming ESP-TM2 Controller7 Normal Operation AUTO RUN During watering, the display shows a blinking sprinkler symbol, the current Program and the Remaining Run Time. OFF Turn the dial to OFF to stop automatic irrigation or to cancel all active watering immediately. bdCAUTION: Watering will NOT occur if the controller remains in OFF. Manual Watering Options Test All Stations Start watering immediately for all programmed stations. Turn the dial to MANUAL STATION. blPress or to set a Run Time. blPress and hold or turn the dial to AUTO RUN to start manual station test. Run a Single Station Start watering immediately for a single station. Turn the dial to MANUAL STATION. blPress to display the MANUAL STATION screen. blPress or to select a Station. blPress or to set a Run Time. blPress and hold or turn the dial to AUTO RUN to start the selected Station. Run a Single Program Start watering immediately for one program. Turn the dial to AUTO RUN. blPress Program Select to choose the desired Program (if necessary). blPress and hold to start the selected Program. During Manual Watering: The display shows a blinking sprinkler symbol, the active Station Number or Program, and the Remaining Run Time. blTo cancel manual watering, turn the dial to OFF for three seconds until the screen shows OFF. ESP-TM2 Controller8 Odd or Even Calendar Days Set watering to occur on all ODD or EVEN calendar days. Turn the dial to RUN DAYS. blPress Program Select to choose the desired Program (if necessary). blPress and hold and at the same time until ODD or EVEN is displayed. Cyclic Days Set watering to occur at specific intervals, such as every 2 days, or every 3 days, etc. Turn the dial to RUN DAYS. blPress Program Select to choose the desired Program (if necessary). blOn the Custom Days screen, press until the Cyclic screen is displayed (after SUN). blPress or to set the desired DAY CYCLE, then press blPress or to set the DAYS REMAINING before the cycle begins. The NEXT watering day updates on the display to indicate the day that watering will start as shown. Rain Sensor Set the controller to obey or ignore a rain sensor. When set to ACTIVE, automatic irrigation will be suspended if rainfall is detected. When set to BYPASS all programs will ignore the rain sensor. Turn the dial to SENSOR. blPress or to select ACTIVE (obey) or BYPASS (ignore). bbNOTE: See Special Features to set Rain Sensor Bypass by Station. Seasonal Adjust Increase or decrease program run times by a selected percentage (5% to 200%). Example: If the Seasonal Adjust is set to 100% and the station Run Time is programmed for 10 minutes, the station will run for 10 minutes. If the Seasonal Adjust is set to 50%, the station will run for 5 minutes. Turn the dial to SEASONAL ADJUST. blPress or to increase or decrease the global percentage setting. blTo adjust an individual Program, press Program Select to choose the desired Program (if necessary). Delay Watering Suspend watering for up to 14 days. Turn the dial to AUTO RUN, then press and hold blPress or to set the DAYS REMAINING. The next watering day will update on the display to indicate when watering will resume. blTo cancel a Rain Delay, set the DAYS REMAINING back to 0. bbNOTE: When the delay expires, automatic irrigation resumes as scheduled. Advanced Programming ESP-TM2 Controller9 Permanent Days Off Prevent watering on selected days of the week (for Odd, Even or Cyclic programming only). Turn the dial to RUN DAYS. blPress Program Select to choose the desired Program (if necessary). blPress and hold Program Select. blPress to set the selected (blinking) day as a Permanent Day Off or press to leave the day ON. Options Reset Button If the controller is not working properly, you can try pressing RESET. blInsert a small tool such as a paper clip, into the access hole and press until the controller is reset. All previously programmed watering schedules will remain stored in memory. CONNECT 120 VAC RESET ACCESSORY 1234567824VACSENSCM 9101112 Remote Accessories A 5 pin accessory port is available for Rain Bird approved external devices. CONNECT 120 VAC RESET ACCESSORY 1234567824VACSENSCM 9101112 ESP-TM2 Controller10 Troubleshooting Watering Issues Problem Possible Cause Possible Solution Watering icon on the display is flashing, but the system is not watering Water supply issue. Verify there is no disruption to the main water line and that all other water supply lines are open and functioning. Wiring is loose, not properly connected or damaged. Check that wiring is securely connected at the controller and in the field. Check for damage and replace if necessary. Check wiring connections and replace with watertight splice connectors if needed. Automatic and/or Manual Watering will not start Connected rain sensor may be activated. Let the rain sensor dry out or else disconnect it from the controller terminal block and replace it with a jumper wire connecting the two SENS terminals. Jumper wire connecting the two SENS terminals may be missing or damaged. Jumper the two SENS terminals on the controller terminal block by connecting them with a short length of 14 to 18 gauge wire. Solenoid or master valve is shorted. Confirm short message on the display. Correct the issue in the wiring. Clear the message by testing watering at the shorted valve or by pressing the button. Excessive watering Programs may have multiple start times that were set unintentionally Programs (A, B or C) only require a single start time in order to run. Separate start times are not required for each valve. Electrical Issues Problem Possible Cause Possible Solution Display is blank.Power not reaching the controller. Verify the main AC power supply is securely plugged in or connected and working properly. Verify the orange power supply wires are connected to the controller “24 VAC” terminals. Display is frozen and controller will not accept programming. An electrical surge may have interfered with the controller’s electronics. Unplug the controller for 2 minutes, then plug it back in. If there is no permanent damage, the controller should accept programming and resume normal operation. Press and release the RESET button. Safety Information bcWARNING: This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capacity, or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. bcWARNING: Special precautions must be taken when valve wires (also known as station or solenoid wires) are located adjacent to, or share a conduit with other wires, such as those used for landscape lighting, other “low voltage” systems or other “high voltage” power. Separate and insulate all conductors carefully, taking care not to damage wire insulation during installation. An electrical “short” (contact) between the valve wires and another power source can damage the controller and create a fire hazard. bcWARNING: All electrical connections and wiring runs must comply with local building codes. Some local codes require that only a licensed or certified electrician can install power. Only professional personnel should install the controller. Check your local building codes for guidance. bdCAUTION: Use only Rain Bird approved accessory devices. Unapproved devices may damage the controller and void warranty. For a list of compatible devices go to: www.rainbird.com Disposal of Electronic Waste In compliance with European Directive 2002/96/CE and EURONORM EN50419:2005, this device must not be thrown away with household garbage. This device must be the object of an appropriate, selective removal procedure in order to recuperate it. bbNOTE: Date and time are retained by a lithium battery which must be disposed of in accordance with local regulations. Questions? Scan the QR code to visit www.rainbird.com/esptm2 for help setting up and operating the Rain Bird ESP-TM2 Controller Call Rain Bird toll free Technical Support at 1-800-724-6247 (USA and Canada only) Rain+Birdt FCC Part 15 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If the equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by the following measures:blReorient or relocate the receiving antenna.blIncrease the separation between the equipment and receiver.blConnect the equipment into an outlet on a circuit different from that to which the receiver is connected.blConsult the dealer or an experienced radio/TV technician for help.blChanges or modifications not expressly approved by Rain Bird Corporation could void the user’s authority to operate the equipment. This product was FCC certified under test conditions that included the use of shielded I/O cables and connectors between system components. To bin in compliance with FCC regulations, the user must use shielded cables and connectors and install them properly.blThis class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations. Cet appareil Numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. Rain Bird Corporation 970 W. Sierra Madre Azusa, CA 91702 USA Tel.: (626) 963-9311 Rain Bird International, Inc. 145 North Grand Avenue Glendora, CA 91741 USA Tel.: (626) 963-9311 Rain Bird Europe 900, rue Ampère, B.P. 72000 13792 Aix en Provence CEDEX 3 FRANCE Tel.: (33) 4 42 24 44 61 Technical Services for U.S. and Canada only: 1 (800) RAINBIRD 2016 Rain Bird CorporationtRegistered trademark of Rain Bird Corporation www.rainbird.com www.rainbird.eu 690299-01 Rev.05/16 Arroyo Irrigation 27762 Antonio Parkway L1-308, Ladera Ranch, CA 92694 ArroyoIrrigation.com • Tel: 949.430.7030 Gcollins@ ArroyoIrrigation.com 1 January 25, 2023 Jeff Nelson Devco Homes 13 Corporate Plaza, Suite 102 Newport Beach, CA 92660 RE: 1030 Sandcastle Residence Dear Jeff Enclosed is the irrigation audit report for the newly installed irrigation system at the 1030 Sandcastle Residence located in Corona Del Mar, Ca. Please let us know if you have any further questions or concerns. Sincerely, Garry Collins, ASIC, CLIA, Water Sense Partner Principal, Arroyo Irrigation, Inc CLIA Certification ID#: 73452 Arroyo Irrigation 27762 Antonio Parkway L1-308, Ladera Ranch, CA 92694 ArroyoIrrigation.com • Tel: 949.430.7030 Gcollins@ ArroyoIrrigation.com 2 Residence 1030 Sandcastle Corona Del Mar, Ca Irrigation audit January 25, 2023 Arroyo Irrigation 27762 Antonio Parkway L1-308, Ladera Ranch, CA 92694 ArroyoIrrigation.com • Tel: 949.430.7030 Gcollins@ ArroyoIrrigation.com 3 Introduction The purpose of the irrigation audit is to evaluate the installation and performance of the newly installed irrigation system with respect to its efficient application of water as a condition for final building permits. The irrigation system was designed by Environmental Designs, Laguna Beach California under Registered Landscape Architect Craig Pfyffer, RLA 5986. Plans and detail drawings dated March 2021 were provided for use during the audit. The irrigation system was observed on Wednesday, Janaury 25, 2023. The general contractor was present during the audit. The weather during the audit was 70 degrees, sunny, and no wind. Arroyo Irrigation 27762 Antonio Parkway L1-308, Ladera Ranch, CA 92694 ArroyoIrrigation.com • Tel: 949.430.7030 Gcollins@ ArroyoIrrigation.com 4 Irrigation Audit Controller A new Rain Bird ESP-TM2, 8 station smart conventional controller was selected for the residence. The Irrigation controller was mounted outside the residence by the pool equipment with rain sensor installed. Arroyo Irrigation 27762 Antonio Parkway L1-308, Ladera Ranch, CA 92694 ArroyoIrrigation.com • Tel: 949.430.7030 Gcollins@ ArroyoIrrigation.com 5 Controller Programs The following establishment program was entered into the controller. Three months later, the homeowner is to program the maturity program into the controller. Program (As of 1/25/23): Program: A Program Start Time: 7:00 am, 2:00 pm Program Days: Monday, Tuesday, Wednesday, Thursday, Friday, Saturday and Sunday Station Time (Minutes) Station Time (Minutes) 1 8 25 2 8 26 3 8 27 4 8 28 5 8 29 6 8 30 7 8 31 8 13 32 9 33 10 34 11 35 12 36 13 37 14 38 15 39 16 40 17 41 18 42 19 43 20 44 21 45 22 46 23 47 24 48 Arroyo Irrigation 27762 Antonio Parkway L1-308, Ladera Ranch, CA 92694 ArroyoIrrigation.com • Tel: 949.430.7030 Gcollins@ ArroyoIrrigation.com 6 Point of Connection (POC) The following equipment consist of the point of connection for the irrigation system: Water Meter: Type: Muller Serial Number: 220048983 Reduce Pressure and Backflow: Type: Febco 825Y Serial Number: J167066 Arroyo Irrigation 27762 Antonio Parkway L1-308, Ladera Ranch, CA 92694 ArroyoIrrigation.com • Tel: 949.430.7030 Gcollins@ ArroyoIrrigation.com 7 Irrigation Observation The irrigation system was observed to have the following changes: Irrigation Notes: The contractor reduced the irrigation valve total from 12 valves to 8 valves. Valves with similar hydrozones were combine which allowed the project to meet MAWA. Arroyo Irrigation 27762 Antonio Parkway L1-308, Ladera Ranch, CA 92694 ArroyoIrrigation.com • Tel: 949.430.7030 Gcollins@ ArroyoIrrigation.com 8 Conclusion The installed irrigation system meets standard irrigation practices for residential irrigation systems. The contractor will coordinate with the owner to input the maturity irrigation schedules into the irrigation controller. Respectfully submitted, Garry Collins, ASIC, CLIA, Water Sense Partner Principal, Arroyo Irrigation, Inc CLIA Certification ID#: 73452 Arroyo Irrigation 27762 Antonio Parkway L1-308, Ladera Ranch, CA 92694 ArroyoIrrigation.com • Tel: 949.430.7030 Gcollins@ ArroyoIrrigation.com 9 Arroyo Irrigation Email: Gcollins@ArroyoIrrigation.com Office: 949.430.7030 Cell: 562.773.2722 Website: ArroyoIrrigation.com Mailing Address: 27762 Antonio Parkway Suite L1-308, Ladera Ranch, CA 92694