HomeMy WebLinkAbout3a_Additional Materials Received_PA2013-020Additional Materials Received
Item No. 3a
Mixed -Use Code Amendment
PA2013 -020
*3011-.1111
Code Amendment No. CA2013 -001 (proposed amendment is underlined)
Section 20.22.030, Table 2 -10
TABLE 2 -10
DEVELOPMENT STANDARDS FOR VERTICAL AND
HORIZONTAL MIXED -USE ZONING DISTRICTS
Development
Additional
Feature
MU -V
Mu -MM
MU -DW
MU- CV115th St.
Regulations
Lot Dimensions
Minimum dimensions required for each newly created lot.
(1)(2)
Lot Area (2)
2,500 sq. ft.
10,000 sq. ft.
40,000 sq. ft.
1 5,000 sq. ft.
Lot Width (2)
25 ft.
50 ft.
100 ft.
1 40 ft
Density Range
Minimum/maximum allowable density range for residential uses.
Lot area required
Minimum: 1,631
Minimum: 1,631
Minimum: 1,631
Minimum: 1,631
per unit (sq. ft.) (3)
Maximum: 2,167
Maximum: 2,167
Maximum: 2,167
Maximum: 2,167
U
For property]
beginning 100 ft.
north of Coast Hwy.
Notes:
(1) All development and the subdivision of land shall comply with the requirements of Title 19 (Subdivisions).
(2) The standards for minimum lot area and lot width are intended to regulate sites for development purposes only and are
not intended to establish minimum dimensions for the creation of ownership or leasehold (e.g., condominium)
purposes.
(3) For the purpose of determining the allowable number of units, portions of legal lots that are submerged lands or
tidelands shall be included in land area of the site.
(4) Portions of legal lots that are submerged lands or tidelands shall be included in the net area of the lot for the purpose of
calculating the allowable floor area of structures.
(5) The minimum density maybe modified or waived through the approval of a site development review.
EXHIBIT A
Code Amendment No. CA2013 -001 (proposed amendment is underlined)
Section 20.22.030, Table 2 -10
TABLE 2 -10
DEVELOPMENT STANDARDS FOR VERTICAL AND
HORIZONTAL MIXED -USE ZONING DISTRICTS
Development
Additional
Feature
MU -V
MU -MM
MU -DW
MU- CVI15th St.
Regulations
Lot Dimensions
Minimum dimensions required for each newly created lot.
(1x2)
Lot Area (2)
2,500 sq. ft.
10,000 sq. ft.
40,000 sq. ft.
5,000 sq. ft.
Lot Width (2)
25 ft.
50 ft.
100 ft.
40 ft
Density Range
Minimum/maximum allowable density range for residential uses.
Lot area required
Minimum: 1,631
Minimum: 1,631
Minimum: 1,631
Minimum: 1,631
per unit (sq. ft.) (3)
Maximum: 2,167
Maximum: 2,167
Maximum: 2,167
Maximum: 2,167
(�
For property
L5j
beginning 100 ft.
north of Coast Hwy.
Notes:
(1) All development and the subdivision of land shall comply with the requirements of Title 19 (Subdivisions).
(2) The standards for minimum lot area and lot width are intended to regulate sites for development purposes only and are
not intended to establish minimum dimensions for the creation of ownership or leasehold (e.g., condominium)
purposes.
(3) For the purpose of determining the allowable number of units, portions of legal lots that are submerged lands or
tidelands shall be included in land area of the site.
(4) Portions of legal lots that are submerged lands or tidelands shall be included in the net area of the lot for the purpose of
calculating the allowable floor area of structures.
(5) The minimum density maybe modified or waived through the approval of a site development review.